• Journal of The Korean Association For Science Education
• /
• v.13 no.1
• /
• pp.66-79
• /
• 1993

The purposes of this study are to analyse trend of STS movement in Korea and to collect basic data on application of STS to school science education. It investigated, from 1990 to March 1993, journals of 6 associations, a monthly magazine of science education, and printed materials of seminars or workshops about science education. It also surveied a question to 47 science teachers and 26 researchers who had experienced STS workshop. The results of the study are as follows: (1) The studies of STS increased since 1990, but they are made at a introduction or background of STS. (2) The 98.7% of the respondents want to apply STS in school science education. (3) They responded that a device for the application of STS which is added last part of each chapter or last chapter, will use the STS program that made by subject, still maintain current science curriculum. (4) They responded that the knowledge & compreshion domain and inquiry process domain contain more high than others. 5) The STS subjects for application to the school science education are as follows; Environment pollution, science for living, ethics of science, human health and disease, information communication, an ecosystem destruction, development and storage of natural resources. This study suggested that establishment of a research institute for systematic research of STS, in-service training, a new evaluation process, a balancing of other subjects and increasing learning hour and changing objectives.

• Journal of Fisheries and Marine Sciences Education
• /
• v.19 no.3
• /
• pp.323-328
• /
• 2007

This paper was studied on the effect of the specific resistance of water on corrosion characteristics of STS 304 for gas boiler. The electrochemical polarization test of STS 304 for gas boiler was carried out. And the polarization resistance, uniform corrosion, corrosion behavior by impressed potential and corrosion sensitivity of STS 304 with specific resistance were considered. The main results are as following: 1) With being low the specific resistance of water, the polarization resistance and corrosion potential of STS 304 decreases, while corrosion current density increases. 2) Under constant impressed potential, the corrosion sensitivity of STS 304 is large with being low the specific resistance due to synergy effect of Cl ion.

• Journal of Welding and Joining
• /
• v.15 no.3
• /
• pp.65-78
• /
• 1997

The effect of $O_2$and Al contents and the variation of welding parameters such as arc currents, welding speed on the weld penetration was investigated. Examination of weld penetration using GTAW was accomplished in the ferritic STS410L and austenitic STS304. Good penetration could be controlled by the variation of $O_2$ and Al contents in STS304. However, influences of $O_2$ and Al contents on the ferritic STS410L are far less than those on the austenitic STS304. Welding parameters should be considered first before controlling $O_2$ and Al contents for a good penetration in ferritic STS410L. In the simulation study under the stationary heat sources, the results of simulation and experiment have a similar tendency.

• Journal of Power System Engineering
• /
• v.13 no.3
• /
• pp.33-39
• /
• 2009

The aim of this study is to analyze the welds characteristics of the 205 stainless steel pipe for application of street pole material. The welds corrosion behavior of STS 205 pipe in 0.1 N sulphuric acid solution and 5% NaCl solution at room temperature was studied using both salt spray test and potentiodynamic polarization experiment. The morphology and components of corrosion products on surface of STS 205 pipe welds were investigated using SEM/EDX. The tensile strength and yield strength values of STS 205 plate were 715 MPa and 369 MPa respectively. The microvickers hardness values of STS 205 pipe welds were slightly increased than that of STS 304 pipe welds. Corrosion current density($I_{corr.}$) and critical current density($I_{crit.}$) values of STS 205 pipe welds in 3.5% NaCl solution were $1.89{\times}10^{-6}$ $A/cm^2$ and $15.8{\times}10 ^{-6}$ $A/cm^2$. The corrosion resistance of SIS 205 pipe welds was similar to its STS 304 pipe welds. The STS 205 and 304 pipe welds passive films were chromium oxide. Especially, the STS 205 pipe welds showed good corrosion resistance in 0.1 N sulphuric acid. This is attributed to the forming of protective chromium oxide on the surface of STS 205 pipe welds.

• Journal of Powder Materials
• /
• v.20 no.3
• /
• pp.203-209
• /
• 2013

In this study, STS 316L powders with 3 wt.% Cu and 1 wt.% Sn known as corrosion-resistance reinforcement elements, are prepared to make different kinds of specimens, in which, 3 wt.% Cu and 1 wt.% Sn are added in different forms by mixing, alloying and fully alloying. After sintering in the same condition, the corrosion resistance, wear resistance and their mechanical properties of specimens are tested respectively. According to the comparison, STS 316L specimen sintered at $1270^{\circ}C$ showed the most excellent mechanical property: HRB 78 (hardness), 1130.7 MPa (RCS), 26.6% (Fraction Wear), It was similar with the specimen made of STS316L and fully alloyed Cu and Sn powders, meanwhile, the latter one appears the best corrosion resistance, 75hrs-salt immersion test results. In addition, the specimens with Cu and Sn powders additive showed relatively worse wear resistance in compared with STS316L specimen.

• Journal of Welding and Joining
• /
• v.9 no.4
• /
• pp.28-39
• /
• 1991

The change of microstructure in the bonded interlayer and mechanical properties of the joints were investigated during Transient Liquid Phase Diffusion Bonding(TLP bonding) of STS304/SM17C and STS304/SM45C couples using Ni base amorphous alloys added boron and prepared alloy as insert metal. Main experimental results obtained in this study are as follows: 1) Isothermal solidification process was completed much faster than theoretically expected time, 14ks at 1473K temperature. Its completion times were 3.6ks at 1423K, 2.5ks at 1473K and 1.6ks at 1523K respectively. 2) As the concentration of boron in the insert metal increased, the more borides were precipitated near bonded interlayer and grain boundary of STS304 side during isothermal solidification process, its products were $M_{23}P(C,B)_6}_3)$ The formation of grain boundary during isothermal solidification process was completed at structural carbon steel after starting the solidfication at STS304 stainless steel. 4) The highest value of hardness was obtained at bonded interface of STS304 side. The desirable tensile properties were obtained from STS304/SM17C, STS304/SM45C using MBF50 and experimentally prepared insert metal with low boron concentration.

• PNF and Movement
• /
• v.9 no.1
• /
• pp.31-38
• /
• 2011

Purpose : Sit-to-stand (STS) is one of the important activities of daily living (ADL) and each of its parameters is used frequently. This study aimed to examine the influence of different seat height on performance time and floor reaction force strength during an STS movement. Methods : Fifteen young-adult male subjects participated in this study. The subjects were divided into three groups based on lower leg length. Subjects performed an STS movement twice from chairs at height adjusted by the lower leg length of each subject. To examine the influence of the chair seat height, ground reaction forces during a STS performed with 3 chair heights adjusted to each subjects lower leg length were compared. Results : Vertical ground reaction force and time during an STS movement were measured to evaluate. Parameters regarding ground reaction force were selected for analyses. Significant differences were found in ground reaction force at G1 was greater than G2 and G3. Conclusion : The STS movement achievement strategy differed since chair seat height changes relatively by the difference in lower leg length. When conducting the ability to achieve STS movement rating test, chair seat height considering each subject's lower leg length may be needed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.2
• /
• pp.349-356
• /
• 2002

For two kinds of 25Cr-20Ni stainless steels, STS310J1TB and STS310S with and without a small amount of Nb and N, creep behavior has been studied in a stress and temperature range from 147 to 392 MPa and from 923 to 773 K with a special reference to tertiary creep. The average creep life of STS310J1TB was about 100 times longer than that of the STS310S. The apparent activation energy for the initial creep rate was 330 kJ/mol in STS310J1TB, while that of the STS310S was 274kJ/mol in a power law creep region and 478 kJ/mol in a region of power law breakdown (PLB). The activation energy for STS310S below PLB is close to the for self-diffusion. When compensating for the temperature dependence of the Young's modulus and the omega value, it was found that the apparent activation energy for STS310J1TB was reduced to the activation energy for diffusion of chromium atom in gamma steel. The stress exponent of STS310S was about 12.3 above PLB and 5.1 in a power law creep region. Notwithstanding that the creep condition for STS310J1TB was in a power law creep region, its stress exponent was 7.9 larger than that of STS310S corresponding to the same creep conditions. This was ascribed to the presence of fine precipitates in STS310J1TB.

• Journal of The Korean Association For Science Education
• /
• v.15 no.3
• /
• pp.310-315
• /
• 1995

The development of science and technology not only improved the quality of life of human being, but also brought about environmental problems. Consequently, consensus has been established that early environmental education for youngsters is critical for the preservation of clean environment. A conventional way of teaching has not been very effective for changing their attitude and behavior regarding environmental problems. STS program, which has been one of the major trend in science education, intends to teach science through everyday experience rather than knowledge. This study purports to examine the effectiveness of STS program on environmental problems compared to conventional teaching method. Six week program was developed and applied to subchapter 'Environmental Pollutions & Our Lives' of 3rd grade middle school science text book. The results of this study can be summarized as follows. 1. STS program was significantly effective in changing students' attitude(p<.001). It was effective not only changing their thinking but also changing their behavior. 2. There was no difference between the STS program and conventional teaching method in improving students' knowledge(p>.05). 3. The correlation between the level of knowledge achievement and the attitude on environment was very low(r=.0564,p>.05).

• Journal of the Korean Institute of Gas
• /
• v.9 no.4 s.29
• /
• pp.11-16
• /
• 2005

In this paper, the hydrogen osmosis test and the mechanical tensile test were carried out to examine hydrogen cracking behavior of STS444 with welding conditions. In $0.5MH_2SO_4+0.001M \;As_2O_3$ solution, the hydrogen embrittlement characteristics of weld zone of STS444 added to load of $1,400 kg/cm^2$ together with hydrogen osmosis by current of $30mA/cm^2$ for 60 min. was considered. As a result of study on the hydrogen embrittlement and mechanical characteristics of STS444외와 with welding conditions the tensile stress and elongation of STS444 get lower by the absorption of oil or water before welding. Also, the reduction rate of tensile stress and elongation of STS444 is larger because of hydrogen embrittlement by the absorption of oil or water. STS444 by the absorption of water before welding is more sensitive to hydrogen embrittlement than oil.