• Journal of The Korean Association For Science Education
• /
• v.10 no.1
• /
• pp.9-16
• /
• 1990

This study investigated the effects of variations in the kinetic structure on science knowledge acquisition. According to the rationale of the kinetic structure theory, a communication having high structrue would facilitate greater knowledge acquisition than a presentation with low structure. To testify that hypothesis, a modified non-equivalent pretest posttest control group design was used. Four 10th grade classes (2 classes for each sex) were selected. On the topic of human digestive system, two tape recorded lessons differing in kinetic structure were developed. On n of two was high structure ($\bar{B}_{1}$=0.56), and the other was low structrue ($\bar{B}_{1}$=0.99) Results indicated that the high structure lesson did not show significantly higher score than the low structrue lesson(F=2.225, P<0.137). But when the data were analyzed by sex, only boy students showed the result that the high structure lesson had significantly higher score than the low structure lesson (F=4.785, P<0.009). The results of this study suggest that a high Structure communication will facilitate the science achievement in the case of boy students.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2000.04a
• /
• pp.131.2-131.2
• /
• 2000

• Archives of Pharmacal Research
• /
• v.5 no.2
• /
• pp.107-108
• /
• 1982

Some examples of stereoselective epoxidation of acyclic allylic and homoallylic systems will be presented.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2000.05a
• /
• pp.51-54
• /
• 2000

In variable structure control algorithm, sliding mode makes the closed loop system insensitive to modelling uncertainties and external disturbances. However due to imperfections in switching, the system trajectory chatters, which is very undesirable. And the insensitivity property of a sliding mode controller is present only when the system is in the sliding mode. To overcome these shortcomings, in this paper, new sliding mode control algorithm using time-varying sliding surface and fuzzy PI structrue is proposed.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1631-1634
• /
• 1997

Since surgery is usually a difficult task because of physiological tremor, eye strain, and tremor, contagious and radioactive hazard, it is necessary to develop micro-surgery telerobotic system using improved tools suitable for their specific tasks. Nowadays the growth of interest on microsurgery and medical applications of robotics has been so rapid. But the medical robots are only practical applications of the industrial robots. This paper identifies five general areas of advanced microsurgery based on the current technological background and expertise, and analyzes the motion, tool and accuracy with respect to microsurgery task, and proposed the criteria to evaluate micro-surgical manipulator. The analysis of microusrgery can be heplful to clarify some basic concept and design of micro-surgical manipulators. With these data we will alos propose an efficient in-parallel-platform manipulator having special kinematic structrue structure suitable for microsurgery.

• Journal of the Korean institute of surface engineering
• /
• v.28 no.5
• /
• pp.267-275
• /
• 1995

Electron beam can provide convenient way to heat the substrate during Hollow Cathode Discharge (HCD) ion plating of Ti(C, N)films. Densification of columnar structrue is enhanced by longer duration of electron beam heating(EBH). While strong(111) texture is identified always to be formed, the amount of (200) oriented grains which coherently interfaced with carbide particles of the substrate increased with heating(EBH). In turns, these crystallogaphical change lead to the increase of micro hardness and adhesion of coating. Adhesion of Ti(C, N) films increased more dramatically in case of ASP30 substrate of which carbide particles dispersed more finely than M42. Therefore, it could be concluded that both the density of film and interfacial structure can affect the adhesion property. Overheating of substrate could be resulted in low adhesion resistance due to high residual stress developed in the film.

• Journal of Food Hygiene and Safety
• /
• v.11 no.3
• /
• pp.203-207
• /
• 1996

One kind of fungus was isolated and identified from comtaminated red-ginseng in order to give fundermental data for improving hygienic quality of ginseng product. The isolated strain was identified as Aspergillus sp. Hyphae of the strain had septum structrue. The strain showed vesicle and sterigmata structure which were typical characteristics of Aspergillus species. The growth of the strain was slightly inhibited by sodium benzoate and potassium sorbate at a concentration of 0.05%. The strain showed no growth at 4.0% potassium sorbate. The isolated stain Aspergillus sp. showed no significant degradation in the presence of red-ginseng saponins.

• Journal of the Korean Vacuum Society
• /
• v.2 no.4
• /
• pp.486-490
• /
• 1993

Cd4SnSea6 & Cd4SnSe6 : Co2+ single crystals were grown by the chemical transport reaction (CTR) method. The grown single crystlas crrystallize in the monoclinic structrue and have the direct band gaps. The energy gaps of them are 1.68eV for Cd4SnSea6 & Cd4SnSe6 : Co2+ at 293K. The impurity opticla absorption peaks due to cobalt dped with impurity appear at 4879cm-1, 5392cm-1 and 6247 com-1, and are attributed to the electron transitions between the split energy levels of Co2+ ion sited at Td symmetry of Cd4SnSe6 single crystal.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.97-101
• /
• 1996

In this paper, We have studied internal quality incluiding chemical compositions, microscopic structrue and nonmetalic inclusion of test materials. We have analyzed dynamic characteristics of cutting resistence including tensile strength value, hardeness value, impact value etcs. We have compared chip treatments of test materials. In analyzing internal quality, all of test materials have typical ferrite+pearlite structure. But, nonmetallic inclusion have oxide and sulfide inclusion in medium carbon steels, mainly sulfide inclusion is existed in S-free cutting steels. In Ca+S-free cutting steels, calcium aluminate and sulfide complex inclusion, had low-melting points, as deformation of sulfide and oxide inclusion is existed. machining characteristics, cutting resistence is maximum in Ca+S-free cutting steels, minimum in medium carbon steels. Chip treatements are excellent in S-free cutting steels, similar to the Ca+S free cutting steels and medium carbon steels.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.8
• /
• pp.92-98
• /
• 1995

The position control of flexible joint manipulator is investigated by applying the self-organizing fuzzy logic controller (SOC) proposed by Procyk and Mamdani. The SOC is a heuristic rule-based controller and a further extension of an ordinary fuzzy controller, which has a hierachy structrue which consists of an algorithm being identical to a fuzzy controller at the lower ollp and a learning algorithm accomodating the performance evalution and rule modification function at the upper ollp. This form of control can be used in those complex systems which have been too difficult to control or which in the past have had to rely on the experience of a human operator. Even though the significant dynamic coupling of the motors and links on the flexible joint manipulator, the performance of command-following is good by applying the proposed SOC.