• The korean journal of orthodontics
• /
• v.23 no.4 s.43
• /
• pp.707-724
• /
• 1993

The purpose of the study is to estimate hard and soft tissue changes after orthognathic surgery for the correction of the mandibular prognathism and to describe interrelationship and ratios of soft and hard tissue changes. The presurgical and postsurgical lateral cephalograms of 31 treated patients(17 males and 14 females) was used ; these patients had received combined orthodontic-surgical treatment by means of a bilateral sagittal split ramus osteotomy. Their ages ranged from 16 to 31 years and mean age was 21.4 years. A computerized cephalometric appraisal was developed and used to analyse linear and angular changes of skeletal and soft tissue profile. The statistical elaboration of the data was made by means of $SPSS/PC^+$. The results of the study were as follows : 1. The correlations of soft and hard tissue horizontal changes were significantly high and the ratios were $97\%$ at LI, $107\%$ at ILS, and $93\%$ at Pog'. 2. The correlations of vertical changes at Stm, LI and horizontal changes at Pog were high$(26\%)$ and at the other areas were not statistically high. 3. The correlations of soft ad hard tissue vertical changes were not significantly high in all areas except Gn' $(30\%)$ and Me' $(56\%)$. 4. The soft tissue thickness was significantly decreased in upper lip and increased in lower lip, and the amount of changes after surgery was reversely correlated with initial thickness. 5. The facial convexity was increased and relative protrusion of upper lip was increased and that of lower lip was decreased. 6. The upper to lower facial height(Gl-Sn/Sn-Me') was increased and upper to lower jaw height(Sn-Stms/Stmi-Me') was increased.

• Structural Engineering and Mechanics
• /
• v.57 no.4
• /
• pp.657-680
• /
• 2016

Reinforced concrete (RC) deep beams are structural members that predominantly fail in shear. Therefore, determining the shear strength of these types of beams is very important. The strut-and-tie method is commonly used to design deep beams, and this method has been adopted in many building codes (ACI318-14, Eurocode 2-2004, CSA A23.3-2004). In this study, the efficiency of artificial neural networks (ANNs) in predicting the shear strength of RC deep beams is investigated as a different approach to the strut-and-tie method. An ANN model was developed using experimental data for 214 normal and high-strength concrete deep beams from an existing literature database. Seven different input parameters affecting the shear strength of the RC deep beams were selected to create the ANN structure. Each parameter was arranged as an input vector and a corresponding output vector that includes the shear strength of the RC deep beam. The ANN model was trained and tested using a multi-layered back-propagation method. The most convenient ANN algorithm was determined as trainGDX. Additionally, the results in the existing literature and the accuracy of the strut-and-tie model in ACI318-14 in predicting the shear strength of the RC deep beams were investigated using the same test data. The study shows that the ANN model provides acceptable predictions of the ultimate shear strength of RC deep beams (maximum $R^2{\approx}0.97$). Additionally, the ANN model is shown to provide more accurate predictions of the shear capacity than all the other computed methods in this study. The ACI318-14-STM method was very conservative, as expected. Moreover, the study shows that the proposed ANN model predicts the shear strengths of RC deep beams better than does the strut-and-tie model approaches.

• Journal of Embryo Transfer
• /
• v.32 no.4
• /
• pp.337-342
• /
• 2017

The present study was aimed to determine the effects of green tea extract (GTE) and beta-mercaptoethanol (${\beta}-ME$) supplementation in boar sperm freezing extender on in vitro fertilization (IVF) and reactive oxygen species (ROS) and glutathione (GSH) levels of presumptive zygotes (PZs). Experimental groups were allocated into lactose egg yolk (LEY) without antioxidant (control), GTE (1,000 mg/l in LEY) and ${\beta}-ME$ ($50{\mu}M$ in LEY). In freezing, spermatozoa extended with LEY were cooled to $5^{\circ}C$ for 3 h and then kept at $5^{\circ}C$ for 30 min following dilution with LEY containing 9% glycerol and 1.5% Equex STM. The final sperm concentration was $1{\times}10^8/ml$. Spermatozoa were loaded into straws and frozen in nitrogen vapor for 20 min. For IVF, oocytes were matured in NCSU-23 medium and co-cultured with spermatozoa following thawing at $37^{\circ}C$ for 25 sec. At 12 h following IVF, IVF parameters (sperm penetration and monospermy) were evaluated. In addition, GSH and ROS levels of PZs were determined by Cell Tracker Blue CMF2HC and DCHFDA, respectively. IVF parameters did not show any significant difference among the experimental groups. GSH and ROS levels of PZs were not significantly different between groups. In conclusion, antioxidant supplementation in boar sperm freezing could not influence IVF parameters, ROS and GSH levels of PZs.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.9
• /
• pp.916-922
• /
• 2009

Because thermal design of satellite carrying out mission in space is performed by thermal analysis result using thermal mathematical model, accuracy of thermal mathematical model is important and it can be improved by model correlation. Correlation steps of satellite thermal math model are composed of modeling of satellite configuration placed in thermal vacuum chamber, verification of correspondence between thermal math model and real satellite configuration, and adjustment of modeling parameters from major part to minor part etc. In this study, correlation success criteria was established and correlation for satellite thermal math model was performed using result of thermal vacuum test of satellite structure-thermal model to meet the success criteria. The overall results satisfied the criteria and this correlated thermal model was applied for detailed thermal design of satellite.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.135-136
• /
• 2012

Carbon atoms near the surface of W(110) induce reconstructions such as $R(15{\times}12)$ -C/W(110) which consists of two characteristic parts, one square shaped and bright protrusion and two smaller ones. In the atomic resolution STM image, the bigger protrusion shows the periodicities of clean W(110), indicating that it is almost carbon poor region. The smaller protrusion contains hexagonal carbide surface layer of ${\alpha}$-W2C on W(110). Employing this carburized W(110) as templates, we grow Co and Fe clusters of less than ten atoms. Due to the selectivity of bonding sites, growth of larger cluster is highly unfavorable for Co and the size of clusters is very uniform. Since Co atoms prefer to sit on the bigger protrusion rather than smaller one, Co cluster can be arranged one-dimensionally in $R(15{\times}12)$-C/W(110) with quite uniform size distribution. However, Fe clusters sit on both sites without favored site, but still with uniform size distribution. On the other hand, Fe clusters can be grown with quasi one-dimensional order in $R(15{\times}3)$-C/W(110), which consists of only smaller protrusions. We investigate the magnetic properties of the ordered nano-sized clusters. Experiments using XMCD reveals little magnetic moment of Co cluster on $R(15{\times}12)$-C/W(110). This observation is consistent with the predictions of our first principles calculations that small Co clusters can be nonmagnetic or antiferromagnetic with low mean magnetic moment per atom.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.53-53
• /
• 2011

This paper describes results for surface and bulk characterization of the most promising thin film solar cell material for high performance devices, (Ag,Cu) (In,Ga) Se2 (ACIGS). This material in particular exhibits a range of exotic behaviors. The surface and general materials science of the material also has direct implications for the operation of solar cells based upon it. Some of the techniques and results described will include scanning probe (AFM, STM, KPFM) measurements of epitaxial films of different surface orientations, photoelectron spectroscopy and inverse photoemission, Auger electron spectroscopy, and more. Bulk measurements are included as support for the surface measurements such as cathodoluminescence imaging around grain boundaries and showing surface recombination effects, and transmission electron microscopy to verify the surface growth behaviors to be equilibrium rather than kinetic phenomena. The results show that the polar close packed surface of CIGS is the lowest energy surface by far. This surface is expected to be reconstructed to eliminate the surface charge. However, the AgInSe2 compound has yielded excellent atomic-resolution images of the surface with no evidence of surface reconstruction. Similar imaging of CuInSe2 has proven more difficult and no atomic resolution images have been obtained, although current imaging tunneling spectroscopy images show electronic structure variations on the atomic scale. A discussion of the reasons why this may be the case is given. The surface composition and grain boundary compositions match the bulk chemistry exactly in as-grow films. However, the deposition of the heterojunction forming the device alters this chemistry, leading to a strongly n-type surface. This also directly explains unpinning of the Fermi level and the operation of the resulting devices when heterojunctions are formed with the CIGS. These results are linked to device performance through simulation of the characteristic operating behaviors of the cells using models developed in my laboratory.

• Ceramist
• /
• v.21 no.2
• /
• pp.4-18
• /
• 2018

Lastly, neuromorphic computing chip has been extensively studied as the technology that directly mimics efficient calculation algorithm of human brain, enabling a next-generation intelligent hardware system with high speed and low power consumption. Three-terminal based synaptic transistor has relatively low integration density compared to the two-terminal type memristor, while its power consumption can be realized as being so low and its spike plasticity from synapse can be reliably implemented. Also, the strong electrical interaction between two or more synaptic spikes offers the advantage of more precise control of synaptic weights. In this review paper, the results of synaptic transistor mimicking synaptic behavior of the brain are classified according to the channel material, in order of silicon, organic semiconductor, oxide semiconductor, 1D CNT(carbon nanotube) and 2D van der Waals atomic layer present. At the same time, key technologies related to dielectrics and electrolytes introduced to express hysteresis and plasticity are discussed. In addition, we compared the essential electrical characteristics (EPSC, IPSC, PPF, STM, LTM, and STDP) required to implement synaptic transistors in common and the power consumption required for unit synapse operation. Generally, synaptic devices should be integrated with other peripheral circuits such as neurons. Demonstration of this neuromorphic system level needs the linearity of synapse resistance change, the symmetry between potentiation and depression, and multi-level resistance states. Finally, in order to be used as a practical neuromorphic applications, the long-term stability and reliability of the synapse device have to be essentially secured through the retention and the endurance cycling test related to the long-term memory characteristics.

• Journal of Technologic Dentistry
• /
• v.39 no.3
• /
• pp.161-167
• /
• 2017

Purpose: We compare the bond strength of heat-cured PMMA of Lucitone 199 and QC-20 and Tokuyama Rebase Resin of self-cured resin, which are widely used and well accepted in clinical practice. In order to test the mechanical bonding and chemical bonding, we will compare the bond strength between EstheShot Bright, Smiletone, Repair and Rebase resins. Methods: The denture base resin used in this study was PMMA heat-cured QC-20 and Lucitone 199, polyamide resin EstheShot Bright, Smiletone. And Two types of self-curing Rapid Repair and Tokuyama Rebase were used as resection resins. To measure the bond strength, the denture specimens were fabricated in the size of $10{\times}64{\times}3.5mm$ as instructed by the manufacturer. A surface treatment agent was applied to the cut surfaces of each denture specimen, and the specimens were placed in a preformed silicone mold, and autoclaved excimer resins were prepared. The bending strength of the fabricated specimens was measured using a universal testing machine (STM-5, United Calibration Co., U.S.A.) to measure the three-point bending strength. Results: In both polycarbonate and polyacetal resin, a special resin surface treatment agent showed higher bonding strength than the resin surface treatment agent(p<0.05). Regardless of the type of surface treatment, polycarbonate showed higher bond strength than polyacetal resin(p<0.05). Conclusion: It is considered desirable to use a special surface treating agent for the thermoplastic denture base resin such as polycarbonate and polyacetal resin.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.28.3-28.3
• /
• 2009

과학기술위성 3호는 2007년 6월에 사업착수를 시작하여, 동년 8월 시스템요구사항검토회의(SRR)를 통해 임무 요구사항을 도출하였고, 동년 12월에 시스템기본설계검토회의(SDR)과 2008년 9월 시스템예비설계검토회의(PDR)를 개최하여 시험인증모델(EQM, Engineering& Qualification Model) 제작을 시작하여, 납품을 완료하고 ETB(Engineering Test Bed)상에서 유닛의 기능 시험 및 접속시험, 그리고 환경시험을 수행을 완료하였다. 또한 열구조모델 (STM, Structure and Thermal Model)도 제작을 완료하고 발사환경시험과 열평형 환경시험을 완료하였다. 이와같이 시험인증모델 및 열구조모델에 대한 지상에서의 시험과 검증이 완료된 시험결과를 바탕으로 2009년 9월 상세설계를 완료하고 비행모델 제작에 착수할 예정이다. 이 논문에서는 과학기술위성 3호의 시험인증모델에 대한 시험의 목적, 종류 그리고 검증에 대한 결과 그리고 향후 계획에 대해 발표하고자 한다. 참고로 과학기술위성 3호는 주탑재체인 다목적적외선영상시스템(MIRIS)은 우리 은하계의 근적외선 관측, 우주 배경복사 관측 및 지구 지표면의 적외선 영상 획득을 임무로 하고 있고, 부탑재체인 초소형 영상 분광기(COMIS)는 한반도 지역의 다중 스펙트럼 영상을 획득함으로써 대기관측 및 환경감시의 임무를 가지고 있다.

• The Journal of Advanced Prosthodontics
• /
• v.1 no.2
• /
• pp.68-74
• /
• 2009

STATEMENT OF PROBLEM. When veneering composite resin-metal restoration is prepared, the fact that bond strength between Ti and composite resin is relatively weak should be considered. PURPOSE. The purpose of this study is to evaluate the shear bond strength between the veneering composite resin and commercial pure (CP) Ti / Ti-6Al-4V alloy according to the method of surface treatment. MATERIAL AND METHODS. The disks were cast by two types of metal. Their surfaces were treated by sandblasting, metal conditioner, TiN coating and silicoating respectively. After surface treatment, the disks were veneered by composite resin (Tescera$^{TM}$, Bisco, USA) which is 5 mm in diameter and 3 mm in thickness. The specimens were stored in water at $25^{\circ}C$ for 24 hours, and then evaluated for their shear bond strength by universal testing machine (STM-$5^{(R)}$, United Calibration, USA). These values were statistically analyzed. RESULTS. 1. All methods of surface treatment were used in this study satisfied the requirements of ISO 10477 which is the standard of polymer-based crown and bridge materials. 2. The metal conditioner treated group showed the highest value in shear bond strength of CP Ti, silicoated group, TiN coated group, sandblasted group, in following order. 3. The silicoated group showed the highest value in shear bond strength of Ti-6Al-4V alloy, metal conditioner treated group, sandblasted group, TiN coated group, in following order. CONCLUSION. Within the limitations of this study, all methods of surface treatment used in this study are clinically available.