• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1390-1391
• /
• 2006

본 연구에서는 전도성 분자로 잘 알려진 4,4-Di(ethynyl phenyl) -2'-nitro-1-(thioacetyl)-benzene(nitro - benzene) 분자를 Au (111) 표면에 자기조립하고, ultra high vacuum scanning tunneling microscopy (UHV-STM)을 사용하여 STM tip과 sample 사이의 거리를 변화시키면서 전기전도 특성을 측정하였다. Au 기판제작은 연증착시스템 (Thermal Evaporation System)으로 제작하였으며, piranha 용액 ($H_{2}SO_{4}\;:\;H_{2}O_{2}$=3:1)을 사용하여 전치리한 후, 자기조립 단분자막 (SAMs)을 형성하였다. 먼저 1-octanethiol을 ethanol solution용액 1 mM/L 농도에서 24시간 동안 자기조립한 후에, ethanol를 solution 용액으로 이용하여 nitro-benzene를 0.1 nM/L 농도로 암실에서 30분간 자기조립 하였다. 자기조림 후 solution을 제거하기 위해 에탄올로 세척하여 $N_2$로 건조시켰다. 이 조건하에서 UHV-STM을 사용하여 nitro-benzene SAMs의 실시간 모폴로지의 변화에 따른 nitro-benzene의 전기전도 특성을 STM tip - SAMs - Au 기판의 수직구조로 STM tip과 nitro-benzene의 거리를 변화시키면서, tunneling current을 조사하였다. 측정 결과 Z-position 변화에 대한 tunneling current와 resistance의 변화를 확인할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.5
• /
• pp.499-502
• /
• 2001

Unexpectedly, the brightest row was known to represents the lowest lying Te atoms in the STM image of NbTe2. Projected density of states and crystal orbital overlap population show that the 5pz orbital of the lowest lying Te(2) atom doe s not interact with the 4d orbital of Nb strongly so that the 5pz band remains in the vicinity of the Fermi energy. Consequently the lowest lying Te(2) atoms contribute higher electron density near the Fermi energy which in turn exhibits brightest image in the STM experiments.

• The Journal of the Korean Society for Microbiology
• /
• v.6 no.1
• /
• pp.29-40
• /
• 1971

Various kinds of antibiotics are generally believed to have inhibitory effects on the antibody response. However, as polymyxin B which belongs to the cyclic polypeptide group of antibiotic was found to have some enhancing effects on the antibody response of rabbits to enterobacterial common antigen(CA) under specified conditions, experiments were carried out on this problem with the following results. 1. When mixture of polymyxin B and CA derived from Salmonella typhimurium(STM) was treated 30 minutes at $37^{\circ}C$ and injected three times into rabbits by intravenous route, the antibody response to CA was weaker than rabbits injected CA only. 2. Mixture of polymyxin B and CA showed a marked antibody production when injected into rabbits primed with small amounts of heat-extracted antigen of STM, while the injection of CA alone showed low titers of response. 3. Mixture of polymyxin B and heat-extracted CA-containing antigen of Escherichia coli 014 also showed a increased antibody production than CA alone in rabbits primed with antigen of STM. 4. The effect of polymyxin B appeared in different ways. This antibiotic did not enhance the CA antibody response in rabbits primed with small amounts of E. coli 0111 and 055, but enhance in rabbits primed with Shigella flexneri. 5. No enhancing effect on the antibody response was observed by polymyxin B in rabbits primed with CA. 6. No enhancing effect on the antibody response was also noted in rabbits primed with STM antigen in case polymyxin B and CA were administered simultaneously but in veins of different places. 7. Bacitracin did not enhance the CA antibody response in primed rabbits with STM antigen, but neomycin slightly enhance the response. 8. Lipopolysaccharide showed no priming effect on the CA antibody response, and no enhancement of the CA antibody response in rabbits printed with STM. 9. The priming effect of STM antigen against CA antibody response was very weak as compared with the effect of CA derived from STM antigen.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.22 no.6
• /
• pp.1243-1252
• /
• 2012

Due to the widespread use of smart devices, threats of direct observation attacks such as shoulder surfing and recording attacks, by which user secrets can be stolen at user interfaces, are increasing greatly. Although formal security models are necessary to evaluate the possibility of and security against those attacks, such a model does not exist. In this paper, based on the previous work in which a HCI cognitive model was firstly utilized for analyzing security, we propose STM-GOMS model as an improvement of GOMS-based model with regard to memory limitations. We then apply STM-GOMS model for analyzing usability and security of a password entry scheme commonly used in smart devices and show the scheme is vulnerable to the shoulder-surfing attack. We finally conduct user experiments to show the results that support the validity of STM-GOMS modeling and analysis.

• ETRI Journal
• /
• v.14 no.2
• /
• pp.48-57
• /
• 1992

본고에서는 동기식 전송신호인 STM-N(Synchronous Transport Module-Level N) 의 형성을 위한 동기식 다중방식에 대해 개관하고, 초고속 STM-N 신호처리에 필수적으로 요구되는 프레이밍 및 스크램블링을 보다 저속에서 처리할 수 있는 병렬신호처리 알고리즘과 이의 구현기법에 대해 기술한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.297-298
• /
• 2010

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.596-601
• /
• 2008

This paper presents how to develop visual design tools for construction of strut-and-tie models(S (STM). STMs have shown internal force flows for dimensioning and proportioning of D-regions of reinforced concrete structures. In order to select an appropriate strut-and-tie model some interactive graphic tools are necessary to help designers compare alternatives by changing the geometry of initial STM. This study proposes to use force polygons representing the equilibrium state of STM. The change of STM dynamically shows change of force magnitudes by force polygon. Once the geometry of STM is determined the detailing design process is required in the next procedure.

• Aerospace Engineering and Technology
• /
• v.2 no.2
• /
• pp.76-82
• /
• 2003

To guarantee the proper functions of a satellite in the extreme space environment, the several test models are developed generally. There are advantages that the design and the analysis of Flight Model(FM) can be validated through these test models, and the functional reliabilities can be increased by reflecting the modifications on the final design of FM. The integration and test of Structure & Thermal Model(STM) of KOMPSAT, being currently developed, have been completed. In this paper, the processes of design and analysis of the STM propulsion system, one of the KOMPSAT modules, are described.

• Journal of Electrochemical Science and Technology
• /
• v.4 no.4
• /
• pp.153-156
• /
• 2013

Charge transfer between STM tip and Au(100) has been investigated by using a Scanning Tunneling Microscopy (STM) technique in dry, $H_2O$, and $D_2O$ atmospheres. Dry atmosphere was indicated by humidity as low as 5 % and high humidity as high as 98% was managed by injecting $H_2O$ and $D_2O$ to the chamber. The current decayed more slowly in high humidity than in dry atmosphere. The plateau currents were found to appear at separations larger than ca. $5{\AA}$ where the current decay stopped depending on applied bias voltages. The polarity dependence was observed at the STM junction between Pt-Ir tip and the gold. On the contrary, little dependence was seen at the one between Au tip and the substrate electrode.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.70-73
• /
• 1992

This paper describes the modeling of human memory using a nerve field model which is proposed for modeling the mechanism of brain mathematically. In our model, two phases of memory, retention and recollection, are focused on. The former consists of two stages, short-term memory (STM) and long-term memory (LTM). The proposed model consists of three parts, the STM Layer, LTM Layer and the Intermediate Layer between them. Each of these is constructed by a nerve field. In the STM Layer, memorized information is retained dynamically in the form of the reverberating states of units within the layer, while in the LTM Layer, it is stored statically in the form of structures of the weight on the links between units. the Intermediate Layer is introduced to translate this dynamic representation in the STM Layer to the LTNI Layer, and also to extract the static information from the STM Layer. In addition to this, we consider the recollection of information stored in the LTM. Finally, the behavior of this model is demonstrated by computer simulation.