• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.3 s.96
• /
• pp.53-61
• /
• 1999

STL has several errors such as orientation error, hole error, and acute triangle error on being translated from CAD software. These errors should be corrected before using in Rapid Prototyping. So the software is necessary to correct errors. In this study, STL Editor which is a system for STL error correction and shape modification is developed and contains following characteristics. 1.Apply the triangle based data st겨cture. 2.Use the graphic user interface for easy work. 3.Use the Diet method to reduce data size. 4.Use the Delaunay triangulation method to enhance the quality of STL. 5.Modify the STL errors manually.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.416-421
• /
• 1997

This study presents a way to construct 3D shape in STL format from 2D slice data. Nowadays ahape reconstruct has been done in many ares, the application of this method is important especially in Reverse Engineering which reconstructs original shape from cross-section data. Current RP (Rapid Prototyping) is used not only for the verification of a part designed but also for the production and tooling in more effective way. In RP technology, data should be prepared in STL format. In this paper, the way to make 3D shape data in STL format form 2D slice data is described which can be used to reconstruct an original shape in RP equipment.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.965-969
• /
• 1995

This paper deals with effective using the IGES file for flexible data exchange among the other CAD/CAM system. If a data exchange between STL file and the neutral IGES file in Stereolithography system is available, a product design becomes more flexible. THere can be many restrictions and difficulties intranslating these data. First, an STL file follows two rules, such as right-hand rule, and vertex-to-vertex rule, thus requires a structural verification. Second, translation should be performed with minmal errors. It becomes very important to translate IGES file of limited kinds of entities fot the purpose of geometric information into STL file with minor data manipulation. The developed system suggests a good approach of translating the sampled B-spline surface of IGES and shows a potential linkage between IGES and STL format file.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.9 s.174
• /
• pp.194-201
• /
• 2005

Recently, as Rapid Prototyping is attracting people's attention, many peoples are actively participating in the research on STL format. The STL files are transformed to be input for RP after modeling in CAD system. When the shape, however, needs to be changed or edited, it is impossible without the original data. So, if the original data is lost, new modeling is required. Therefore, this study suggests a way to edit the shape in STL format and to make the Boolean operation possible between the original and edited shapes. In addition, the reliability was confirmed after going over the errors of the edited data.

• International Journal of CAD/CAM
• /
• v.2 no.1
• /
• pp.55-67
• /
• 2002

In many areas of industry, it is desirable to have fast and reliable systems in order to quickly obtain suitable solid models for computer- aided analyses. Nevertheless it is well known that the data exchange process between CAD modelers and CAE packages can require significative efforts. This paper presents an approach for geometrical data exchange through triangulated boundary models. The proposed framework is founded on the use of STL file specification as neutral format file. This work is principally focused on data exchange among CAD modelers and FEA packages via STL. The proposed approach involves the definition of a topological structure suitable for the STL representation and the development of algorithms for topology and geometry data processing in order to get a solid model suitable for finite element analysis or other computer aided engineering purposes. Different algorithms for model processing are considered and their pros and cons are discussed. As a case study, a prototype modeler which supports an exporting filter for a commercial CAE package has been implemented.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.12
• /
• pp.21-27
• /
• 1998

This paper recommends the database construction for STL data and the new method of Delaunay's triangulation method in order to decrease volume errors by verifying STL file errors and modifying hole errors. Each vertex for the boundary coordinates of the verified hole errors was analyzed according to the following cases: planes or slow curves, edges, apexes, and rapid curves. In each case, a different modification process was adopted. With this method, most errors resulting from the conversion into the STL data as well as lots of volume errors arising from error modification were decreased.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.10
• /
• pp.46-55
• /
• 1996

As industrial standard data, the STL format which approximates three dimensional CAD model to triangular facets, is used for RP(Rapid Prototyping) system in recent days. Because most RP system take the only form of two dimensional line segments as an input stream inspite of its imperfectness while converting into STL format, a CAD model is converted into a standard industrial format which is composed of many triangular facets. The error verifying process is composed of four main steps, and these are 1) Remove facets with two or more vertices equal to each other. 2) Fix overlapping error such as more than three facets adjacent to anedge. 3) Fill holes in the mesh by using Delaunay triangulation method. 4) Correct the wrong direction and normal vectors. This paper is concerned with serching the mentioned errors in advance and modifying them.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.597-601
• /
• 1996

Nowadays, the STL format, industrial standard data, which approximates three dimensional CAD model to triangular facets, is used for RP(Rapid Prototyping) system. Because most RP machine is accpted to only two dimensional line segments, but some STL translators are sometimes poorly implemented. The error verifying process is as follows. 1) Remove facets with two or more vertices equal to each other. 2) Fix overlapping error such as more than three facets adjacent to an edge. 3) Fill holes in the mesh by using Delaunay triangulation method. 4) Repair wrong direction and value of normal vectors. This paper is concerned with searching the mentioned errors in advance and modifying them.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.53-56
• /
• 2001

Reverse engineering has been widely used for the shape reconstruction of an object without CAD data and it includes some steps such as scanning of a clay or wood model, and generating some manufacturing data in an STL file. A new approach to remove point data with Delaunay triangulation is introduced to deal with the size problems of STL file and the difficulties in the operation of RP process. This approach can be used to reduce a number of measuring data from laser scanner within a specified tolerance, thus it can avoid the time for handing point data during modeling process and the time for verifying and slicing STL model during RP process. Developed software enables the user to specify the criteria for the selection of group of triangles either by the angle between triangles or the percentage of triangles reduced, and thus RP models with accuracy will be helpful to automated process.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.3
• /
• pp.78-86
• /
• 2018

The 3D mesh model is used in various fields, such as virtual reality, shape-based searching, 3D simulation, reverse engineering, 3D printing, and laser scanning. There are various formats for the 3D mesh model, but STL and OBJ are the most typical. Since application systems support different 3D mesh formats, developing technology for converting 3D mesh models from one format into another is necessary to ensure data interoperability among systems. In this paper, we propose a method to convert a 3D mesh model in STL format into the OBJ format. We performed the basic design of the conversion system and developed a prototype, then verified the proposed method by experimentally converting an STL file into an OBJ file for test cases using this prototype.