• 제목/요약/키워드: STEP Solid Data

검색결과 61건 처리시간 0.029초

일래스토메릭 부싱의 반경방향모드 비선형 점탄성 모델연구 (A Study of A Nonlinear Viscoelastic Model for Elastomeric Bushing in Radial Mode)

  • 이성범;류재평
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2002년도 추계학술대회 논문집
    • /
    • pp.703-708
    • /
    • 2002
  • An elastomeric bushing is a device used in automotive suspension systems to reduce the load transmitted from the wheel to the frame of the vehicle. A bushing is an elastomeric hollow cylinder which is bonded to a solid steel shaft at its inner surface and a steel sleeve at its outer surface. The relation between the load applied to the shaft or sleeve and the relative deformation of Elastomeric bushing is nonlinear and exhibits features of viscoelasticity. A load-displacement relation fur elastomeric bushing is important fur dynamic numerical simulations. A boundary value problem for the bushing response leads to the load-displacement relation which requires complex calculations and is hence unsuitable. Therefore, by modifying the constitutive equation for a nonlinear viscoelastic incompressible material developed by Lianis, the data fur the elastomeric bushing material was obtained and this data was used to derive the new load-displacement relation fur radial response of the bushing. After the load relaxation function for the bushing is obtained from the step displacement control test, Pipkin-Rogers model was developed. Solutions were allowed for comparison between the results of Modified Lianis model and those of the proposed model. It is shown that the proposed Pipkin-Rogers model is in very good agreement with Modified Lianis model.

  • PDF

직교격자 기반 수치기법을 이용한 선박의 대변위 운동해석 (Analysis of Large-Amplitude Ship Motions Using a Cartesian-Gridbased Computational Method)

  • 양경규;남보우;이재훈;김용환
    • 대한조선학회논문집
    • /
    • 제49권6호
    • /
    • pp.461-468
    • /
    • 2012
  • In this study, a Cartesian-grid method based on finite volume approach is applied to simulate the ship motions in large amplitude waves. Fractional step method is applied for pressure-velocity coupling and TVD limiter is used to interpolate the cell face value for the discretization of convective term. Water, air, and solid phases are identified by using the concept of volume-fraction function for each phase. In order to capture the interface between air and water, the tangent of hyperbola for interface capturing (THINC) scheme is used with weighed line interface calculation (WLIC) method which considers multidimensional information. The volume fraction of solid body embedded in the Cartesian grid system is calculated using a level-set based algorithm, and the body boundary condition is imposed by a volume weighted formula. Numerical simulations for the two-dimensional barge type model and Wigley hull in linear waves have been carried out to validate the newly developed code. To demonstrate the applicability for highly nonlinear wave-body interactions such as green water on the deck, numerical analysis on the large-amplitude motion of S175 containership is conducted and all computational results are compared with experimental data.

200kW 탑형 태양열발전시스템에서 사용되는 Heliostat의 집열특성 분석 (Analysis of Energy Concentration Characteristics of Heliostat used in 200kW Tower Type Solar Thermal Power Plant)

  • 박영칠
    • 한국태양에너지학회 논문집
    • /
    • 제31권3호
    • /
    • pp.80-88
    • /
    • 2011
  • Heliostat in the tower type solar thermal power plant is a sun tracking mirror system to reflect the solar energy to the receiver and the optical performance of it affects to the efficiency of whole power plant most significantly. Thus a solid understanding of heliostat's energy concentration characteristics is the most important step in designing of the heliostat field and the whole power plant. The work presented here is the analysis of energy concentration characteristics of heliostat used in 200kW solar thermal power plant, where the receiver located at 43m high in tower has $2{\times}2$m rectangular shape. The heliostat reflective surface is formed by 4 of $1{\times}1$m flat plate mirror facet and the mirror facet is mounted on the spherical frame. The direct normal incident radiation models in vernal equinox, summer solstice, autumnal equinox and winter solstice are first derived from the actually measured data. Then the intercept ratio, heat flux distribution and total energy collected at the receiver for the heliostats located in the various places of the heliostat field are investigated. Finally the effect of mirror facet installation error on the optical performance of the heliostat is analyzed.

양돈농가의 돈분뇨 액비화 처리 우수사례 실태조사 (A Case Study on the Effective Liquid Manure Treatment System in Pig Farms)

  • 김수량;전상준;홍인기;김동균;이명규
    • 한국축산시설환경학회지
    • /
    • 제18권2호
    • /
    • pp.99-110
    • /
    • 2012
  • 본 연구에서 조사된 일부 선도적인 양돈농가에서는 설치 운영하는 호기적 액상발효 공정은 대부분의 농가가 공정별 설계인자 및 물리 화학적인 성분변화의 특성보다는 경험적인 운영을 토대로 액비를 생산하고 있는 것을 알 수 있었다. 김 등의 조사연구에 따르면 가축분뇨의 발생단계인 분뇨수거방식은 현재 국내 돈사의 70% 이상이 슬러리 형태로 분뇨가 배출되고 있는 것으로 보고되고 있다. 양돈분뇨의 수거방식과 배출형태가 대부분 슬러리라는 사실은 양돈분뇨의 적정처리에 의한 환경오염 차단과 자원화 이용과정에 적용될 각종 공법 및 시스템 적용이 돈사 슬러리부터 집중 관리해야 함을 시사한다. 이처럼 가축분뇨 액비화의 적정처리에 있어서는 발생단계 뿐만 아니라 액비가 토양에 환원되기 직전까지의 모든 과정이 전반적으로 고려되어야 한다. 본 연구의 조사대상 농가의 가축분뇨 액비화 운영에 있어서 핵심적으로 구분 할 수 있는 단계를 주요사항 별로 구분하여 Table 8에 나타내었다. 가축분뇨 액비화 처리에 있어서 고액분리 단계의 경우 고액분리 방식과 효율에 따라 BOD (생물학적산소요구량), COD (화학적산소요구량), VFA (휘발성지방산) 등의 제거율의 차이가 있는 것으로 보고되고 있으며, 이는 후단공정 즉 주발효조에서의 공기주입량의 산정, 공기공급방식, 발효기간 및 2차 발효 등 운영방식 결정에 주요한 요인이 될 수 있다. 이와 같이 액비가 생산되어 토양에 환원되기까지의 과정은 각각의 주요한 요소들이 유기적으로 연계되어 있으며, 농가 현장을 방문조사하고, 생산되는 액비를 비교 분석한 결과 액비화 공정에 있어서 필수적인 핵심적 단계를 도출 할 수 있었다. 이에 대한 주요내용은 다음과 같다. 1. 돈사 슬러리 관리 단계 돈사 슬러리는 혐기부패를 최대한 방지하며, 주요 악취물질인 $H_2S$, $NH_4$, VFAs의 생성을 억제하여야 한다. 돈사환경을 개선하기 위한 방법으로서는 부숙이 완전히 완료되어 유용미생물이 활성화된 액비를 돈사 세척수로 이용하거나, 슬러리 피트에 일부 투입하여 단순 저장일수를 처리일수로의 개념적 전환이 필요하다. 2. 고액분리 단계 일반적으로 BOD의 주요원인인 고농도의 유기물질은 대부분 분뇨의 고형성분에 포함되어 있기 때문에 물리적 처리공정인 고액분리 단계에서 최대한으로 제거하여 후단공정인 주발효조의 부하를 최소화 시킨다. 3. 발효처리-공기공급 단계 축산농가 마다 사료의 종류나 관리방법 등이 각기 다르므로 배출되는 슬러리의 성상을 파악하여 물질수지와 처리일수에 기초한 발효조 용량과 공기주입량의 산정이 필요하다. 또한 공기확산 및 막힘현상을 고려한 자동제어 장치나 발효조의 상태를 감시 제어하기 위한 인자로서 pH 및 산화환원전위 등을 실시간으로 모니터링 하는 것이 중요하다. 4. 발효처리-미생물, 반송 단계 일반점검 (온도, pH, 용존산소, 산화환원전위, 전기전도도 등)과 정밀점검 (BOD, COD, VFAs, SS, N, P 등)의 주기적인 점검을 통하여 미생물 생장에 알맞은 유입농도와 반송량을 결정하고 농가환경에 맞는 발효조 운전방식을 확립 할 필요가 있다. 5. 후숙처리-최종액비 단계 후숙조에서는 공기과잉 투입으로 인한 질소성분의 손실을 방지하고, 유용미생물을 이용하여 토양환원에 적합한 액비를 제조한다. 가스발생에 의한 작물생육 피해를 방지할 수 있는 액비 안정화 운전기술을 확립하고, 살포시기를 대응하여 액비의 유 출입을 집중적으로 관리한다. 6. 액비유통센터 연계-농지환원 단계 제조된 액비는 액비유통센터에 위탁하여 살포하는 체계를 확립하고, 악취 민원의 발생을 최대한 억제한다. 액비유통센터는 철저한 년 중 살포프로그램을 운영하여 원활한 살포조직 체제를 구성하는 것이 중요하다. 축산농가에서 가축분뇨 관리방법은 축사의 입지, 주변 환경 및 각종 환경규제 등 여러가지 여건에 따라 각기 다르며, 다수의 축산농가가 특정한 처리방법을 동일하게 적용하는 것은 현실적으로 불가능하다. 따라서 본 연구에서 분석된 각 농가의 액비 성상 등은 여러 가지 환경적 요소가 복합적으로 작용하고 있으며, 조사농가 중 일부는 발효과정 중에 있는 액비를 채취하였으므로, 분석결과를 해석하여 가축분뇨 운영관리를 총체적으로 판단하는 것은 다소 무리가 있다. 추후에는 각 공정에 대해 유입되는 슬러리원수에서부터 처리가 완료되는 단계까지의 과정을 일괄적으로 분석하여, 유입 유출농도, 수리학적 체류시간 등 공학적 요소 및 이에 따른 경제성 평가 등을 세밀하게 연구할 필요성이 있다. 이밖에도 가축분뇨의 중요한 관리부분인 병원성미생물과 관련된 위해성 분분을 고려하지 않을 수 없다. 가축분뇨에는 인간에게 직접적인 영향을 미칠 수 있는 Escherichia coli, Campylobacter, salmonella, Listeria 등 다양한 병원성 세균이 발견된다. 최근 전국적으로 발생된 구제역 사태는 우리나라 축산업 자체에 큰 타격을 주었을 뿐만 아니라, 사회 경제적으로도 막대한 손실을 가져왔다. 이 사건을 계기로 국내 축산기반의 전면적 재정비가 불가피하게 되었음은 물론 가축 분뇨에서 유래한 병원성 미생물 및 바이러스 등의 근원적 대처방법 개선과 가축분뇨의 위생적 처리에 대한 안전관리가 시급한 현안이 되었다. 따라서 안전한 경축순환의 액비유통 관리 체계 구축을 위해서는 병원성 미생물, 바이러스 등과 같은 위해요소를 억제 할 수 있는 액비화 처리기술의 표준화 공정 개발 또한 필요하다.

Unsteady 2-D flow field characteristics for perforated plates with a splitter

  • Yaragal, Subhash C.
    • Wind and Structures
    • /
    • 제7권5호
    • /
    • pp.317-332
    • /
    • 2004
  • Wind tunnel experiments were conducted under highly turbulent and disturbed flow conditions over a solid/perforated plate with a long splitter plate in its plane of symmetry. The effect of varied level of perforation of the normal plate on fluctuating velocities and fluctuating pressures measured across and along the separation bubble was studied. The different perforation levels of the normal plate; that is 0%, 10%, 20%, 30%, 40% and 50% are studied. The Reynolds number based on step height was varied from $4{\times}10^3$ to $1.2{\times}10^4$. The shape and size of the bubble vary with different perforation level of the normal plate that is to say the bubble is reduced both in height and length up to 30% perforation level. For higher perforation of the normal plate, bubble is completely swept out. The peak turbulence value occurs around 0.7 to 0.8 times the reattachment length. The turbulence intensity values are highest for the case of solid normal plate (bleed air is absent) and are lowest for the case of 50% perforation of the normal plate (bleed air is maximum in the present study). From the analysis of data it is observed that $\sqrt{\overline{u^{{\prime}2}}}/(\sqrt{\overline{u^{{\prime}2}}})_{max}$, (the ratio of RMS velocity fluctuation to maximum RMS velocity fluctuation), is uniquely related with dimensionless distance y/Y', (the ratio of distance normal to splitter plate to the distance where RMS velocity fluctuation is half its maximum value) for all the perforated normal plates. It is interesting to note that for 50% perforation of the normal plate, the RMS pressure fluctuation in the flow field gets reduced to around 60% as compared to that for solid normal plate. Analysis of the results show that the ratio [$C^{\prime}_p$ max/$-C_{pb}(1-{\eta})$], where $C^{\prime}_p$ max is the maximum coefficient of fluctuating pressure, $C_{pb}$ is the coefficient of base pressure and ${\eta}$ is the perforation level (ratio of open to total area), for surface RMS pressure fluctuation levels seems to be constant and has value of about 0.22. Similar analysis show that the ratio $[C^{\prime}_p$ max/$-C_{pb}(1-{\eta})]$ for flow field RMS pressure fluctuation levels seems to be constant and has a value of about 0.32.

유체 주입에 의한 단층의 수리역학적 거동 해석: 국제공동연구 DECOVALEX-2019 Task B 연구 현황(Step 1) (Hydro-Mechanical Modelling of Fault Slip Induced by Water Injection: DECOVALEX-2019 TASK B (Step 1))

  • 박정욱;박의섭;김태현;이창수;이재원
    • 터널과지하공간
    • /
    • 제28권5호
    • /
    • pp.400-425
    • /
    • 2018
  • 본 논문에서는 국제공동연구인 DECOVALEX-2019 프로젝트 Task B의 연구결과와 현황을 소개하였다. Task B의 주제는 'Fault slip modelling'으로 유체의 주입으로 인해 발생하는 단층의 재활성(미끄러짐, 전단파괴)과 수리역학적 거동을 예측할 수 있는 해석기법을 개발하는 데에 그 목적이 있다. 1단계 연구는 참가팀들이 연구주제에 대해 숙지하고, 벤치마크 모델을 대상으로 단층의 투수특성과 역학적 거동의 상호작용을 모사할 수 있는 해석코드를 개발할 수 있도록 하는 준비 단계의 연구이다. 본 연구에서는 TOUGH-FLAC 연동해석 기법을 사용하여 물 주입으로 인한 단층의 수리역학적 연계거동을 모사하였다. TOUGH2 해석에서는 단층을 Darcy의 법칙과 삼승법칙을 따르는 연속체 요소로 모델링하였으며, FLAC3D 해석에서는 미끄러짐과 개폐가 허용되는 불연속 인터페이스 요소를 통해 모사하였다. 두 가지 수리간극모델에 대하여 수리역학적 커플링 관계식을 수치화하였으며, 연속체 요소(수리모델)와 인터페이스 요소(역학모델)의 거동을 연계할 수 있는 해석기법을 제시하였다. 또한, 단층의 역학적 변형(간극의 변화)으로 인한 수리물성 변화와 기하학적 변화(해석 메쉬의 변형)를 수리해석에 반영할 수 있는 해석기법을 개발하였다. 다양한 압력의 물을 단계적으로 주입하고 이로 인해 유도되는 단층의 탄성거동 및 전단파괴(미끄러짐)에 대해 살펴보았으며, 수리간극의 변화 양상과 원인, 압력 분포와 주입율의 관계 등을 면밀히 검토하였다. 해석 결과, 본 연구에서 개발한 해석기법이 물 주입으로 인한 단층의 미끄러짐 거동을 합리적인 수준에서 재현할 수 있는 것으로 판단할 수 있었다. 본 연구의 해석모델은 Task B에 참여하는 국외 연구팀들과의 의견 교류와 워크숍을 통해 지속적으로 개선하는 한편, 향후 연구의 현장시험에 적용하여 타당성을 검증할 예정이다.

Clinical Pharmacology of Mycophenolic Acid as Immunosuppressant in Organ Transplaantation

  • Kang, Ju-Seop;Lee, Joo-Won;Jhee, Ok-Hwa;Om, Ae-Son;Lee, Min-Ho;Shaw, Leslie M.
    • Biomolecules & Therapeutics
    • /
    • 제13권2호
    • /
    • pp.65-77
    • /
    • 2005
  • Present article reviews about clinical pharmacology of mycophenolic acid (MPA), the active form of mycophenolate mofetil (MMF), as widely used component of immunosuppressive regimens in the organ transplantation field. MMF, used alone or concomitantly with cyclosporine or tacrolimus, has approved in reducing the incidence of acute rejection and has gained widespread use in solid organ such as kidney, heart and liver transplantation. The application of MPA and development of MMF has shown a considerable impact on immunosuppressive therapy for organ transplantation as a new immunosuppressive agent with different mechanism of action from other drugs after early 1990s. In particular aspect, use of MMF, a morpholinoethyl ester of MPA, represented a significant advance in the prevention of organ allograft rejection as well as allograft and patient survival. In considering MMF clinical data, it is important to note that there is a strong correlation between high MPA area under curve(AUC) values and a low probability of acute allograft rejection. Individual trials have shown that MMF is generally well tolerated and revealed that MMF decreased the relative risk of developing chronic allograft rejection compared with azathioprine. Recent clinical investigations suggested that improved effectiveness and tolerability will results from the incorporation of MPA therapeutic drug monitoring into routine clinical practice, providing effective MMF dose individualization in renal and heart transplant patients. Therefore, MMF has a selective immunosuppressive effect with minimal toxicity and has shown to be more effective that other agents as next step of immunosuppressive agents and regimens that deliver effective graft protection and immunosuppression along with a more favorable side effect.

혐기성 연속회분식 공정을 이용한 분뇨처리시 소화슬러지의 침강 및 탈수특성 (Dewatering and Settling Characteristics of Digested Sludge from the Anaerobic Sequencing Batch Reactor for Treatment of Nightsoil)

  • 이준걸;장덕;허준무;손부순;장봉기;박종안
    • 한국환경과학회지
    • /
    • 제7권6호
    • /
    • pp.867-873
    • /
    • 1998
  • Laboratory study was conducted to provide basic data for operating anaerobic sequencing batch reactor(ASBR) process for treatment of nightsoil. The experiments were concerned with digestion characteristics, settleabiltity and dewaterability of digested sludge in ASBR system. Completely-mixed dally-fed control reactor without solid-liquid separation step was also operated to evaluate the baseline performance since the nature of nightsoil was changed with time. In all case, gas production from the ASBR shows 1.3 to 1.44 times higher than that from control, in spite of almost similar trend in organics removal. During thickening period, remarkable decrease in surface settling velocity was observed at the ASBRs compared with the control. In case of the ASBR run, flotation of mixed digested sludge was not occurred. Also, ultimate thickened volume of ASBRs increased 1.2~1.5 times compared with control. Dewaterability of digested sludge without conditioning decreased when the completely-mixed daily-fed reactor for ASBR run was converted to the ASBR. However, improvement of dewaterability of digested sludge from the ASBRs was observed as a result of addition of FeCl$_3$ to digested sludge for conditioning.

  • PDF

Development of a Web-Based Program for Cross-Calibration and Record Management of Radiation Measuring Equipment

  • Park, So Hyun;Lee, Rena;Kim, Kyubo;Ahn, Sohyun;Lim, Sangwook;Cho, Samju
    • 한국의학물리학회지:의학물리
    • /
    • 제30권2호
    • /
    • pp.59-63
    • /
    • 2019
  • Purpose: To manage radiation measurement equipment, a web-based management program has been developed in this study. Materials and Methods: This program is based on a web service and Java Server Pages (JSP) and employs compatibility and accessibility. Results: The first step in the workflow has been designed to create accounts for each user or organization and to log in. The program consists of two parts: fields for listed instruments, and measurement information. The instruments for measuring radiation listed in this program are as follows: ionization chambers, survey meters, thermometers, barometers, electrometers, and phantoms. Instrument properties can be put in the recording fields and browsing for associated instruments can be performed. The main part of the program is the cross-calibration for each ion chamber. For instance, the ionization chamber to be used as a relative dosimeter can be registered by cross-calibration data with a reference chamber calibrated by an accredited laboratory. This program supports methods using the central axis transfer theory for cross-calibration for the ionization chambers. The reference and field ionization chambers were placed in a solid water phantom along the beam central axis at two different depths, and then the positions were switched. Each measured value was used for calculating the cross-calibration factor. Conclusions: Because many instruments are used and managed in radiation oncology departments, systematic, traceable recording is very important. The web-based program developed in this study is expected to be used effectively in the maintenance of radiation measurement instruments.

Size Tailored Nanoparticles of ZrN Prepared by Single-Step Exothermic Chemical Route

  • Lee, Sang-Ki;Park, Kyung-Tae;Ryu, Hong-Youl;Nersisyan, Hayk H.;Lee, Kap-Ho;Lee, Jong-Hyeon
    • 한국재료학회지
    • /
    • 제22권5호
    • /
    • pp.243-248
    • /
    • 2012
  • ZrN nanoparticles were prepared by an exothermic reduction of $ZrCl_4$ with $NaN_3$ in the presence of NaCl flux in a nitrogen atmosphere. Using a solid-state combustion approach, we have demonstrated that the zirconium nitride nanoparticles synthesis process can be completed in only several minutes compared with a few hours for previous synthesis approaches. The chemistry of the combustion process is not complex and is based on a metathesis reaction between $ZrCl_4$ and $NaN_3$. Because of the low melting and boiling points of the raw materials it was possible to synthesize the ZrN phase at low combustion temperatures. It was shown that the combustion temperature and the size of the particles can be readily controlled by tuning the concentration of the NaCl flux. The results show that an increase in the NaCl concentration (from 2 to 13 M) results in a temperature decrease from 1280 to $750^{\circ}C$. ZrN nanoparticles have a high surface area (50-70 $m^2/g$), narrow pore size distribution, and nano-particle size between 10 and 30 nm. The activation energy, which can be extracted from the experimental combustion temperature data, is: E = 20 kcal/mol. The method reported here is self-sustaining, rapid, and can be scaled up for a large scale production of a transition metal nitride nanoparticle system (TiN, TaN, HfN, etc.) with suitable halide salts and alkali metal azide.