• Korean Journal of Applied Biomechanics
• /
• v.13 no.3
• /
• pp.327-340
• /
• 2003

The purpose of this study was to investigate the height of jump, angle of the ankle and knee, the angular velocity of the ankle and knee between two types of ballet shoes during a jump in the 1st position. The subjects were 5 female ballet majors of university in Busan the majors who have been dancing ballet for six years on the average. The conclusions are as follows: 1. The height of jump had no significant difference between two types of ballet shoes, and then the average of the height of jump with point shoes group ($20.24{\pm}4.62\;cm$) was a little higher than ballet shoes group ($17.50{\pm}4.05\;cm$). 2. The angle of the ankle had no significant difference for all events between two types of ballet shoes. The minimum angle of ankle joint was represented to $54.36_{\circ}$ at the E1 of the left ankle angle of the ballet shoes and the maximum value was showed $155.43_{\circ}$ at the E3 of the right ankle angle of the point shoes. 3. The angle of the knee had no significant difference for all events between two types of ballet shoes. The minimum angle of knee joint was represented to $99.54_{\circ}$ at the E1 of the left knee angle of the ballet shoes and the maximum value was showed $174.25_{\circ}$ at the E3 of the right knee angle of the point shoes. 4. The ankle velocity of the ankle had no significant difference for all events between two types of ballet shoes. The minimum angular velocity of the ankle was represented to 4.35 deg/s at the maximum height(E3) of the point shoes and the maximum value was showed 597.81 deg/s at the take-off(E2) of the right ankle angle of the point shoes. 5. The angular velocity of the knee had significant difference between two types of ballet shoes at the event 1(p<.05). The minimum angular velocity of the hee was represented to -1.68 deg/s at the maximum height(E3) of the point shoes and the maximum value was showed 360.25 deg/s at the take-off(E2) of the left knee angle of the ballet shoes. The other events had no significant difference between two types of ballet shoes.

• Journal of Acupuncture Research
• /
• v.27 no.6
• /
• pp.43-57
• /
• 2010

Objectives : To investigate the effects of electroacupuncture on parameters related to obesity in adults with abdominal obesity. Methods : A three arm randomized single blind pilot study was conducted from Jan 4 to March 25, 2010 in Kyung Hee Oriental Medical Hospital. The subjects were 39 adults with abdominal obesity and were randomly divided by computer generated random table into 3 groups; EA(electroacupuncture), sham EA(sham electroacupuncture) and waitlist groups. Acupuncture points located at abdomen($CV_{12}$, $CV_6$, $ST_{25}$, $SP_{15}$, $SP_{14}$) and extremities($LI_4$, $LI_{11}$, $ST_{36}$, $ST_{44}$) were inserted by disposable stainless steel needles and were stimulated 30 minutes with 24Hz, 0.27~1.3mA(tolerable strength), asymmetric biphasic continuous pulse wave form by STN-111 Stratek device in EA group. Two treatment sessions per week for 5 weeks(10 sessions in total) were done in EA and sham EA groups. The primary outcome measurement was WC(waist circumference), and the secondary outcome measurements included WHR(waist hip ratio), ASF(thickness of abdominal subcutaneous fat), and inbody measurements of BW(body weight), BMI(body mass index), BFR(body fat ratio) and VFA(visceral fat area), and also scores of BULIT-R(bulimia test revised), KoQoL(Korean obesity of QoL) and BSQ(body shape questionnaire). Results : All of 39 subjects were included in ITT(intention-to-treat) analysis. There were significant reductions in WC, WHR and ASF after 5-week electroacupuncture treatments and the percentage reductions were significantly greater than sham EA or waitlist group. There were no significant differences between groups in percentage reductions of other parameters(BW, BMI, BFR, VFA, BULIT-R, KoQoL and BSQ). But, there were continuous reductions in BW, BMI, BFR and VFA at 3 weeks after the end of treatment and there was significant reduction in BW compared with the baseline value in EA group. No seriously adverse effects were reported during the period. Conclusions : Electroacupuncture was more effective than sham electroacupuncture or no intervention on the reduction of WC, WHR and ASF in adults with abdominal obesity.

• Korean Journal of Acupuncture
• /
• v.25 no.3
• /
• pp.65-80
• /
• 2008

Objective : In recent years, many investigators have questioned whether the analgesic effect of acupuncture is simply related to the stress-induced analgesia (SIA). However, there has been lack of studies on this issue. In this study, the stress levels induced by manual acupunctures are compared with the stress in animal experiment models. The experiments have been carried out with Sprague Dawley (SD) rats. Method : For stress level evaluation, Hot plate test has been used. Maximum Possible Effect (MPE) has been measured by checking the pre-test time and post-test time. Cortisol and corticosterone concentrations in serum were measured by enzyme-linked immunosorbent assay (ELISA). Results : In the hot plate test, MPE values of post-test time were significantly decreased after 10 minutes than after 5 minutes. Therefore, optimal time interval was chosen as 10 minutes. There was significant difference of MPE values between Suspension group and all other treatment groups. However, there were no significant differences of MPE values between Sham group and all other treatment groups. However, MPE values showed tendency to decrease when acupuncture needle diameter increased. MPE values of ST040, ST040(lido), NAP040(lido) groups were markedly decreased than that of Suspension group, while that of NAP040 group was substantially increased than that of Sham group increased in acupoint and nonacupoint models. Serum cortisol concentrations of treatment groups were not significantly different from that of Suspension and Sham groups. Serum corticosterone concentration of 0.25 mm group was substantially increased than that of compared with Sham group. Serum cortisol and corticosterone concentrations of treatment groups were not significantly different from those of Suspension and Sham groups in acupoint and nonacupoint models. Conclusion : From hot plate test and serum stress hormones concentrations, it is found that manual acupuncture treatment induces negligible stress or SIA on ST36. And the stress induced by manual acupuncture is more closely related to acupuncture point needlings than diameters of acupuncture needles.

• Journal of The Korean Ophthalmological Society
• /
• v.60 no.2
• /
• pp.126-134
• /
• 2019

Purpose: To assess the accuracy of toric intraocular lens (IOL) implantation by the location and size of the corneal incision. Methods: We retrospectively reviewed the medical records of 98 patients (98 eyes) who underwent phacoemulsification with toric IOL implantation from January 2014 to March 2017. The patients were divided into two groups: group 1 got an incision of the superior side of the cornea (n = 54) and group 2 received an incision on the temporal side of the eye (n = 44). For both groups, incisions were made at their steep corneal astigmatism axises. Each group was further divided into subgroups for whom different sized blades were employed (2.75 vs. 2.2 mm widths). We measured the refractive index and autokeratometric parameters. We postoperatively assessed residual astigmatism and any reduction thereof. Results: In both groups, uncorrected and best-corrected visual acuity, refraction cylinder astigmatism, and autokeratometric astigmatism improved statistically. Between two groups, corneal astigmatism decrease was not significant. Residual astigmatism also showed no significant differences between the two. Patients in both groups treated using 2.75 mm wide blades exhibited greater increases in corneal astigmatism. Conclusions: During cataract surgery, precise correction of astigmatism via toric IOL implantation is possible when surgically induced astigmatism is minimized by careful choice of the location and size of the corneal incision.

• Korean Journal of Psychosomatic Medicine
• /
• v.12 no.2
• /
• pp.157-164
• /
• 2004

Objectives : This study was designed to investigate depression, anxiety, alexithymia, stress responses between well-controlled and poorly-controlled diabetic patients by glycated hemoglobin levels. Methods : The subjects were 55 diabetic patients(mean age : $49.9{\pm}9.9$, 27 men and 28 women) who were confirmed to have diabetes depending on the laboratory findings as well as clinical symptoms at the St. Vincent Hospital Diabetes Clinic, from Mar. 2004 to Aug. 2004. Korean version of Beck Depression Inventory(BDI), State and Trait Anxiety Inventory(STAI), Toronto Alexithymia Scale(TAS) and Stress Response Inventory(SRI) were used for assessment. Based on glycated hemoglobin levels, the patients were divided into 10 well-controlled group(below 7%) and 45 poorly-controlled group(above 7%). We compared BDI, STAI, TAS and SRI scores between two groups by independent t-test. Results 1) Well-controlled diabetics, compared with poorly controlled group, manifested decreased illness duration($12.2{\pm}55.4$months vs. $55.4{\pm}66.6 months)(p=0.000), but other demographic data showed no difference between two groups. 2) The STAI scores of poorly-controlled group were significantly higher in both state anxiety sores $(38.7{\pm}3.8 \;vs.\;43.7{\pm}6.7)(p=0.29)$ and trait anxiety scores$(36.9{\pm}5.7\;vs.\;41.5{\pm}6.4)(p=0.43)$ than well-controlled groups. 3) No significant differences were found in the score of BDI, TAS, SRI between well and poorly-controlled diabetic groups. Conclusion : The above results suggest that poorly-controlled diabetic patients are more likely to have higher anxiety level than well-controlled diabetic patients. However, there were no differences in depression, alexithymia, stress responses between two group. We suggest that physicians should consider integrated approaches for psychiatric problems in the management of diabetic patients.

• Journal of Chest Surgery
• /
• v.23 no.4
• /
• pp.667-675
• /
• 1990

From June, 15th, 1987 to June, 14th, 1989, 105 Duromedics bileaflet cardiac valve prostheses were implanted in 81 patients. Mitral valve replacement was done in 42 patients, 7 underwent aortic valve replacement, 28 underwent double valve replacement, & 4 patients underwent triple valve replacement. Concomitantly used valves were 13 cases; 11 cases were St. Jude Medical valves[M: SJM #29 X4, #27 X5, #25 X 1, T: SJM #33] & two cases were Carpentier Edwards bioprostheses[T: C - E #31X2]. The early mortality rate[within 30 days] was 3.7%[2 patients] & the late mortality rate was 7.4%[3 patients]. Follow-up was done on 72 surviving patients; mean follow-up period was 21.17$\pm$5.36 months. Anticoagulant-related hemorrhage was observed in two patients, possible prosthetic valvular endocarditis was observed in one patient and other specific valve-related complications were none. We concluded, therefore, that good clinical results & a low complication rate could be achieved with Duromedics bileaflet valve in short-term follow-up, & long-term follow-up was also necessary.

• Journal of Conservation Science
• /
• v.25 no.2
• /
• pp.207-217
• /
• 2009

After replicating 10 bronze types such as Gyemija, Gyeongjaja, Eulhaeja, etc. before the Imjin war, we studied the change of microstructure from each casting process, method, and alloy ratio by Gyechukja replicated from "Donggukyeojiseungnam". We selected the average of compositions of Eulhaeja in the National Museum of Korea as the standard(Cu 86.7%, Sn: 9.7%, Pb: 2.3%) of bronze types, so we decided on the alloy's composition of Cu 87%, Sn 15%, Pb 8% added to 5% Sn and Pb contents because of evaporating the Sn and the Pb. Before replicating major metal types, we made master-alloy first, melting it again, and then replicated metal types. The composition of the 1'st replicated Gyechukja showed the range of Cu 85.81~87.63%, Sn 9.27~10.51%, Pb 3.05~3.19%. The 2'nd replicated Gyechukja made using the branch metal left after casting the 1st replica. The 2nd replicated Gyechukja showed the composition range of Cu 87.21~88.09%, Sn 9.06~9.36%, Pb 2.80~3.05%. This result decreases a little contents of Sn and Pb as compared with metal types of the 1st replica. However, it's almost the same as the Eulhaeja's average composition ratio in the National Museum of Korea. As a result of observing the microstructure of restored Gyechukja, it showed the dendrite structure of the typical casting structure and the segregation of Pb. There is no big difference of microstructure between the 1st and the 2nd restored metal types, even though the 2nd restored types partially decreases the eutectoid region in comparison with the 1st types. The systematic and scientific restoration experiment of metal types using Joseon period will be showed the casting method and alloy ratio, and this will be of great help to the study of restoration metal types in the future.

• Journal of Acupuncture Research
• /
• v.29 no.4
• /
• pp.25-34
• /
• 2012

Objectives : This study was conducted to investigate the effects of fixed-intensity and varied-intensity electroacupuncture in pain and sensory threshold concerning parameters visual analogue scale(VAS), brief pain inventory(BPI) and quantitative sensory testing(QST), among chronic tension headache patients. Methods : Thirty patients with chronic tension headache were randomly assigned to three groups and received different kinds of electroacupuncture at $ST_{36}$ and $ST_{37}$. Group A received fixed-intensity electroacupuncture(fixed-EA), group B received varied-intensity electroacupuncture (varied-EA), and group C received only acupuncture treatment without electrical stimulation as a control group. The intervention was given three times per week, and continued in two weeks. All the experiments were conducted blindly. Results : Fixed-EA group showed a significant decrease of VAS and BPI compared to the baseline measurement, while both varied-EA and control group did not. Of the parameters of QST, subtraction of heat pain threshold(HPT) and cold pain threshold(CPT) slightly increased in all groups, but this was not significant. Conclusions : These results suggest that fixed-EA reduce pain and improve quality of life in patients with chronic tension headache and that acupuncture may regulate patient's pain sensitivity through changing sensory threshold.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.7
• /
• pp.3325-3328
• /
• 2016

Background: There are limited studies on oncoplastic breast conserving surgery in Asian women. We aimed to determine the applicability and safety of oncoplastic surgery, highlighting the specific circumstances when it will be most useful and compare our preferred technique with the worldwide practice of oncoplastic approaches. Materials and Methods: Breast cancer patients who underwent oncoplastic breast conserving surgery at a single institution from 1st May 2014-31st March 2015 were included. Data on patient demographics, tumor characteristics and the type of oncoplastic surgery performed were collected. Results: Nineteen breast cancer patients were identified. 42.1% of patients had grade I ptosis. The indications for surgery included a large tumor to breast size ratio (52.6%), multifocal/multicentric lesions (36.8%) and asymmetric breasts (10.6%), averting a mastectomy in 89.4%. Round block was the commonest technique in 63% of patients, in contrast to the inverted T pattern most frequently used in renowned institutions in the West. Mean and median tumor size and weight of specimen were 29.4/25mm (11 - 75mm) and 77g/64g (10 - 246g) respectively. Re-excision rate was 10.5%. Complete mastectomy was performed for one patient. One patient developed wound dehiscence which was treated conservatively. Cosmetic outcome was rated as excellent/good by 94.7% of patients. The patients remained clinically well after a median 16 months follow up. Conclusions: Oncoplastic breast conserving surgery is useful in a specific subgroup of Asian patients with a relatively small breast volume and minimal ptosis. Round block was the commonest technique in our series, in contrast to the worldwide utility of oncoplastic techniques. It is oncologically safe and has good cosmetic outcomes.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.1
• /
• pp.36-44
• /
• 2015

Objectives: This study aimed to elucidate the physicochemical properties of silica powder and airborne particles as by-products generated from fabrication processes to reduce unknown risk factors in the semiconductor manufacturing work environment. Materials and Methods: Sampling was conducted at 200 mm and 300 mm semiconductor wafer fabrication facilities. Thirty-two powder and airborne by-product samples, diffusion(10), chemical vapor deposition(10), chemical mechanical polishing(5), clean(5), etch process(2), were collected from inner chamber parts from process and 1st scrubber equipment during maintenance and process operation. The chemical composition, size, shape, and crystal structure of silica by-product particles were determined by using scanning electron microscopy and transmission electron microscopy techniques equipped with energy dispersive spectroscopy, and x-ray diffractometry. Results: All powder and airborne particle samples were composed of oxygen(O) and silicon(Si), which means silica particle. The by-product particles were nearly spherical $SiO_2$ and the particle size ranged 25 nm to $50{\mu}m$, and most of the particles were usually agglomerated within a particle size range from approximately 25 nm to 500 nm. In addition, the crystal structure of the silica powder particles was found to be an amorphous silica. Conclusions: The silica by-product particles generated from the semiconductor manufacturing processes are amorphous $SiO_2$, which is considered a less toxic form. These results should provide useful information for alternative strategies to improve the work environment and workers' health.