• 제목/요약/키워드: ST17

검색결과 1,618건 처리시간 0.037초

공해(公害)에 관(關)한 조사연구(調査硏究) 제이편(第二編) 한강(漢江), 낙동강(洛東江) 수질오염도(水質汚染度)에 관(關)한 비교(比較) 조사(調査) 연구(硏究) (A Study on Public Nuisance in Han River and Nackdong River Part II. Survey on Water Pollution)

  • 차철환;신영수;박순영;조광수;주종유;김교성;최덕일
    • Journal of Preventive Medicine and Public Health
    • /
    • 제4권1호
    • /
    • pp.65-76
    • /
    • 1971
  • In view of ever rising water pollution problems of river in the vicinity of large urban communities, the author has made an investigation on the pollution of water sampled from Han River (Seoul area) and Nakdong River (Daegu city area) during the period from July to December, 1970. The water samples were taken twice a month during the study period of 6 months from 7 points (locations) along the main stream of Han River at Seoul city and 5 points of Nakdong River at Daegu city. The samples ware measured and analyzed in accordance with the recognized methods in the 'Standard Methods for Examination of Water and waste' by American Public Health Association. The obtained results are as follows : I. Han River. 1. Average turbidity was 5.1 units ranging from 1 to 10 units and the turbidity of down stream was higher than that of the upper stream. 2. pH value showed slight alkalinity (mean;7.2) except Yunchang-Dong (6.9). 3. The mean value of Dissolved Oxygen contents (D.O) was 7.2 ppm. (range of 3.4-10.5ppm.). D.O. of the upper stream (8.2 ppm. at Walker Hill boating place, 8.0 ppm. at the Gwangzang Bridge and Ddookdo) was higher than that of he downstream (5.6ppm. at Yumchang-Dong, 6.4 ppm. at the 2nd Han River Bridge), and D.O. in the winter season was higher than that in the summer season, respectively. 4 The mean value of the Biochemical Oxygen Demand (B.O.D.) was 28.3 ppm. (range of 6.2-64.8 ppm.). The mean value of B.O.D. was 48.7 ppm. at Yumchang-Dong, 42.3 ppm. at the 2nd Han River Bridge, 34.0 ppm. at the 1st nan River Bridge, 28.5 ppm. at the 3rd Han River Bridge, 19.2 ppm. at Dookdo, 13.2 ppm. at the Gwangzang Bridge, and 10.2 ppm. at the Walker Hill boating place in order of value. B.O.D. in July and August (35.6 and 34.5 ppm.) were the highest and that in November and December (18.6 and 21.2 ppm.) were the lowest. 5. Suspended Solids (SS) were from 15.0 to 667.0 ppm. with the mean of 222.1 ppm. 'Suspended Solids' of the water samples at Yumchang-Dong and the 2nd Han River Bridge were found to be 378.1 ppm. and 283.9 ppm. respectively which were higher than at the Gwangzang Bridge (134.1 ppm.) and at Walker Hill boating place (79.3ppm.). 6. Coliform colonies counting of the water samples ranged from $0-2,500{\times}10/100ml$. with the mean value of $205.6{\times}10/100ml$. The most contaminated water sample by coliform were from the point of the 2nd Han River Bridge with $640.8{\times}10/100ml$ while the lowest ones were from Walker Hill boating place with $17.2{\times}10/100ml$. There was also a seasonal variation in coliform contamination that is the higher in summer and the lower in winter. II. Nakdong River 1. The mean value of turbidity was 2.3 units with range of 0 to 9.0 units. The highest point was at Geumho River (7.2 units). and the lowest point was at Gangzung and Moonsan (0.45 and 0.41 units). 2. The mean value of pH was 7.5 (range of 7.1-8.5) and highest point was Geumho River with 8.5. 3. The mean value of D.O. was 8.1 ppm. (range of 3.4-11.2 ppm.). D.O. of the upper stream showed higher value than that of the down stream, and the winter season than the summer season. 4. B.O.D. ranged from 2.6 to 57.0 ppm. (mean; 20.4ppm.). The water sample at Geumho River showed the highest value (41.5 ppm.) while at Moonsan and Gangzung showed the lowest (4.6 and 4.7 ppm.). 5. The mean value of suspended solids was 48.7 ppm. (range of 4.0-182.0 ppm.). The highest month was July (63.7ppm.) and August (62.1 ppm.) and the lowest month was October (37.0 ppm.) and December (24.4 ppm.). 6. The mean value of the coliform colonies was $22.7{\times}10/100ml$. (range of $0-243{\times}10/100ml$.). The highest number of the colonies was found in the sample water at the Whawon recreation area ($50.5{\times}10/100ml$.) followed by the Geumho River ($33.9{\times}10/100ml$.), the Goryung Bridge ($28.3{\times}10/100ml$.), Gangzung($0.7{\times}10/100ml$), and Moonsan ($0.6{\times}10/100ml$.).

  • PDF

활성효모 첨가가 산란계의 생산성에 미치는 영향 (The Effects of Live Yeast(Saaccharomyces cerevisiae) Supplementation on the Performance of Laying Hens)

  • 유종석;백인기
    • 한국가금학회지
    • /
    • 제17권3호
    • /
    • pp.179-191
    • /
    • 1990
  • 활성효모의 첨가가 산란계에 미치는 영향을 알아보기 위하여 5개의 시험을 실시하였다. 시험 1과 2는 하절기에 실시하였는데 시험 1에서는 37주령의 Dekalb-Delta 산란계, 시험 2에서는 100주령의 환우계 Nick-Chick Brown 산란계를 공시하였다. 각 시험에 있어서 240수를 2처리 6반복으로 반복당 20수씩 완전임의 배치하였다. 시험사요는 대조구($T_1$)와 괄기효모 첨가수준이 0.05%인 첨가구($T_2$)로 하여 시험 1은 4주간, 시험 2는 3주간에 걸쳐서 실시하였다. 3개의 시험은 동절기에 실시하였는데 시험 3과 4는 각각 54영 및 52주령의 Hy-Line산란계, 시험 5는 36주령의 육용종계를 공시하였다. 시험은 각각 540수를 3처리 6반복으로 반복당 30수적 완전임의 배치하였다. 시험사료는 대조구($T_1$), 활성순모 0.05% 첨가구($T_2$) 및 0. 1 % 첨가구($T_3$)로 하여 시험 3과 4는 6주간 및 9주간 그리고 시험 5는 4주간에 걸쳐서 실시하였다. 시험 4는 시험사료를 3주마다 회전시켰을 때의 효과를 알아보기 위해 라틴 방각으로 배치하였다. 시험계는 일반농가에서 사육되었으며, 시험사료는 일반시중사료를 사용하였다. 시험 1에서 산란율은$T_2$가 높았으며(P<0.05), 4주간의 평균에서는 유의차가 없었다. 사료효율은 2주에서 고도의 유의차가 있었지만(P<0.01), 4주간의 평균에서는 유의차가 없었다. 난중과 연ㆍ파난율 및 사망율에서는 유의차가 없었다. 시험 2에서 산란율은 $T_2$가 높았으며(P<0.05), 사요악률은 2주와 3주에서 $T_2$가 유의하게(P<0.05, P<0.01)좋았으나 3주간의 평균에서는 유의차가 없었다. 연난발생률은 $T_2$가 높았지만(P<0.05) 1외 다른 조사항목에서는 유의차가 없었다. 시험 3에서 산란율은 처리간에 유의차가 있었고(P<0.05), $T_3$$T_2$보다 그리고 $T_2$$T_1$보다 높았다. $T_1$$T_2$의 난중은 $T_3$보다 무거웠고(P<0.05), $T_2$와 의 사료섭취양은$T_1$에 비해 6주에서 높았지만 (P<0.05), 전 기간 평균에서는 유의차가 없었다. 연난발생율은 처리간에 고도의 유의차가 있었으며(P<0.01). $T_1$$T_3$보다 높았고, $T_3$$T_2$보다 높았다. 사료효율, 연난발생률. 사망율에서는 유의차가 없었다. 시험 4에서 산란율은 활성효모 첨가수준을 증가시킬수록 증가하는 경향이 있었지만 통계적인 유의차는 없었다. 그외 다른 조사항목에서도 유의차는 없었다. 시험 5에서 육용종계의 산란율은 $T_3$$T_1$보다 유의하게 높았다(P<0.01). 사료섭취양은 3주에서는 $T_3$$T_1$ $T_2$보다 높았지만(P<0.05) 전 기간 평균에서는 유의차가 없었다. 수정률 및 부화율은 대조구보다 첨가구가 높은 경향이 있었다

  • PDF

소셜 네트워크 분석을 통한 무형문화유산 공동체 지식연결망 연구 - 정선아리랑을 중심으로 - (A Study of Intangible Cultural Heritage Communities through a Social Network Analysis - Focused on the Item of Jeongseon Arirang -)

  • 오정심
    • 헤리티지:역사와 과학
    • /
    • 제52권3호
    • /
    • pp.172-187
    • /
    • 2019
  • 본 논문의 목적은 무형문화유산 일반전승자의 역할을 주목하면서, 소셜 네트워크 분석을 활용해 무형문화유산 전승공동체의 연결망과 전승활동에서 발생하는 지식 흐름의 구조적 특징을 분석하는 데 있다. 이러한 연구 목적을 이루기 위해 본 논문에서는 연구 대상을 국가무형문화재 종목들 중에서 일반인의 전승활동이 활발한 '아리랑'으로 선정하였다. 아리랑은 오랜 기간 제도권 밖에서 일반대중 활동을 중심으로 자생적으로 전승되었으며, 2015년에 전문전승자 지정 없이 국가무형문화재로 지정된 최초의 사례이다. 현재 아리랑은 약 60여 종, 3,600여 곡에 이르는 것으로 추정된다. 본 논문에서는 이 중에서 전문전승자와 일반전승자의 상호교류가 활발한 향토민요 '정선아리랑'을 중심으로 연구하였다. 소셜 네트워크 분석은 사람과 사람 사이의 관계를 노드(Node)와 링크(Link)로 모델링하여 수치화 통계화 시각화하여 해석하는 방법을 말한다. 이 방법은 전통적으로 사회학에서 사회조직 및 취약계층을 연구하는 데 꾸준히 활용되었다. 최근에는 문헌정보학, 문화콘텐츠학, 경영학 등과 같은 분야에서 연구경향, 시장동향, 조직관리 등을 연구하는 데 이 방법이 활용되고 있다. 이처럼 여러 학문 분야에서 소셜 네트워크 분석을 이용한 연구가 증가하는 추세지만 문화재 분야에서는 관련 연구를 찾아보기가 어렵다. 소셜 네트워크 분석은 크게 3단계, '연결망 모델링', '데이터 수집', '데이터 분석 및 시각화'로 진행된다. 본 논문에서는 첫 번째, 2017년 기준으로 정선아리랑보존회 회원 전체를 조사 대상으로 선정하여 완전한 연결망으로 모델링하였다. 두 번째, 데이터 수집은 보존회 회원 명부를 확보해 2017년 10월 17일 면대면 조사와 2017년 12월 15일 전화 설문조사를 통해 하였다. 세 번째, 데이터 분석은 Netminer 4.0 프로그램을 이용해 중심성 분석, 구조적 등위성 분석, 커뮤니티 분석 등을 주요 지표로 하였다. 본 논문은 기존에 무형문화유산 계보조사에서 소수 사람들의 구술자료에 의존해 파악하던 방식에서 벗어나 객관적이고 계량적인 방법으로 조사할 수 있는 기반을 제공하였다는 점에서 연구 의의가 있다. 그리고 무형문화유산 전승공동체 구성원들의 관계 및 지식 흐름의 구조를 지식지도(2D Spring Map) 형태로 시각화함으로써 추상적인 내용을 직관적으로 파악할 수 있게 했다는 점에서 의미가 있다.

벼줄무늬잎마름바이러스의 대 발생과 발생 요인 (Severe Outbreak of Rice Stripe Virus and Its Occurring Factors)

  • 김정수;이관석;김창석;최홍수;이수헌;김미경;곽해련;남문;김정선;노태환;강미형;조점덕;김진영;강효중;한종우;김병련;정성수;김주희;고숙주;이중환;김태성
    • 농약과학회지
    • /
    • 제15권4호
    • /
    • pp.545-572
    • /
    • 2011
  • 벼줄무늬잎마름바이러스(Rice stripe virus, RSV)에 대하여 유전자 진단기술인 RT-PCR과 VC/RT-PCR 기술을 개발하였다. ELISA 진단법은 유묘 검정법 보다 평균 40.5%, RT-PCR 진단법은 ELISA 진단법 보다 21%의 진단 효율이 높았다. 2009년 경기도 김포, 평택, 시흥 지역에서 채집한 애멸구의 보독충률을 VC/RT-PCR 진단법과 ELISA 진단법으로 검정한 결과 전체 평균 보독충률은 9.2%로 동일하였다. 벼줄무늬잎마름바이러스가 감염된 벼 포장에서 수집한 13개 분리주의 유전자 유연성은 RNA1과 RNA2는 중국+한국, 중국+한국+일본의 2개의 군으로 구분되었다. 또한 병원성 발현에 관여하는 RNA3는 중국, 중국+한국, 한국+일본의 3개 군으로, RNA4는 중국, 한국, 중국+한국+일본, 한국+일본의 4개의 군으로 구분되었다. 경기도 등 7개 도의 주요 28개의 재배지역에서 채집한 애멸구의 전국 평균 보독충률은 2008년 4.3%, 2009년 6.1%, 2010년 7.2%로 매년 상승하였다. 2008년에는 경기도가 11.3%로 가장 높았으며, 2009년에는 전라남도가 20.1%, 2010년에는 경기도 12.0%, 충청북도 14.2%로 가장 높았다. 보독충률이 가장 높았던 지역은 2008년에는 전북 부안 지역이 22.1%, 2009년에는 전남 완도와 진도가 36%, 2010년에는 충북 보은이 30.0%였다. 월동 애멸구의 전국 평균 밀도는 2008년 13.1 마리, 2009년 13.9 마리, 2010년 5.6 마리였으며, 월동 애멸구의 밀도는 전북 부안 지역이 2008년 39.1 마리, 2009년 60.4 마리로 가장 높았으며, 2010년에는 경기 평택 지역이 14.0 마리로 가장 높았다. 2008년 RSV 발생은 전남 진도, 해남 지역을 중심으로 869 ha가 발생하였으며, 2009년에는 전국적으로 21,541 ha가 발생하였으며, 특히 서해안 지역의 경우 경기도, 인천시, 충남, 전북, 전남의 19개 시군, 39개 읍면, 53개 리에서 3,025 포장을 조사한 결과 55.2%가 부분 고사 이상의 피해가 발생하였다. 2008년부터 3년간 전북 부안, 전남 진도 등에서 월동 애멸구의 시기별 발육을 조사한 결과 5월 20일에서 6월 10일 경에는 월동 후 1세대는 대부분 3령과 4령 이었으며 성충은 6월 하순경에 최성기였다. 2009년 5월 31에서 6월 1일에 태안, 서산, 부안, 신안, 진도 등에서 공중 포충망에 채집한 애멸구는 모두 성충이었으며 밀도는 태안 지역이 963 마리, 서천 919 마리, 신안 819 마리 등으로 매우 많이 포획되었으며, 공중 포충망에 채집된 애멸구는 국내에서 월동한 애멸구 집단이 아니고 중국에서 비래한 애멸구 집단으로 확인되었다. 2010년에는 5월 중순에서 6월 중순까지 공중 포충망에 애멸구 성충이 거의 채집되지 않았다. 2009년 충남 홍성, 전북 부안, 전남 영광 등 서해안 8개 지역의 공중 포충망에서 채집한 애멸구 성충의 RSV 보독충률은 2.1%에서 9.5%로 변이가 컸으며, 보령이 9.5%로 가장 높았으며, 다음으로 충남 홍성 7.9%, 전남 영광 6.5%, 충남 태안 6.4%였다. 애멸구 비래 후 약 10일 후에 공중 포충망 주변의 논에 심겨진벼에 대하여 RSV의 유전자 진단 결과 태안 84.6%, 부안 65.4%, 진도 92.9% 이었으며, 평균 감염률은 81% 이었다. 보리는 RSV의 주요 월동 기주식물로 알려져 있으나 RSV의 감염률은 경기 평택 등 전국에서 530점을 채집하여 유전자 진단 결과 감염률이 0.2%로 매우 낮았다. RSV의 새로운 자연 기주식물로 29종이 확인되었다. 하계 일년생 식물은 조개풀 등 13종, 동계 일년생은 들묵새 등 11종, 다년생으로는 우산잔디 등 5종 이었다. RSV 감염률은 동계 일년생인 들묵새 24.9%, 하계 일년생인 바랭이 44.9%, 물피 95.2%, 가을강아지풀 65.5%이었으며, 다년생인 물억새는 33.3%였다. RSV에 감수성인 동진1호 등 8개 품종과 저항성인 삼광벼 등 17개 품종에 대하여 2009년 부안, 익산, 김제 지역의 자연 포장에서 병징 발현 여부를 조사한 결과 감수성 8개 품종은 모두 감수성이었으며, 진성 저항성 품종 중 온누리 등 12개 품종은 감수성이었으며 삼광벼 등 5개 품종은 포장 저항성이었다. RSV에 저항성인 남평벼 등 4 품종과 감수성인 동진1호 등 3 품종을 대상으로 바이러스를 인공접종한 결과 RSV의 병징 발현률은 감수성 품종의 경우 평균 53.3%이었으며 저항성 품종의 경우 평균 34.0%로 19.3% 낮았다. 감수성인 흑남벼와 저항성인 남평벼를 이용하여 병징 발현률과 바이러스 감염률을 조사한 결과 병징 발현률은 흑남벼 28%, 남평벼 12%로 감수성 품종이 병징 발현률이 2배 이상 높았다. 그러나 체내 바이러스 감염률은 흑남벼 85%, 남평벼 97%로 오히려 저항성 품종에서 12%의 높은 감염률을 보였다. 저항성 품종에서의 저항성 기작은 병징 발현에 대한 저항성이며 바이러스 증식에서는 저항성이 아니었다. RSV에 저항성 품종인 남평벼, 온누리와 감수성 품종인 동진1호, 운광벼를 이용하여 생육시기별로 인공접종하여 수량 감소를 2008년부터 3년간 조사한 결과 감수성 품종에서는 주당 수량을 보면 유묘기 감염시 7.8 g, 분얼기 감염시 8.5 g, 최고 분얼기 감염시 13.8 g으로 무처리에 비하면 수량 감소율이 유묘기 51%, 분얼기 46%, 최고 분얼기 13%로 일찍 감염될수록 수량 감소 영향이 컷다. 저항성 품종에서는 시기별 감염과 수량 감소가 통계적으로 상관이 없었다. 자연 발병된 농가 포장에서 운광 품종을 대상으로 태안과 진도지역에서 조사한 결과 발병경률 23.4% 이상이면 발병경률의 증가에 따라서 상관계수 0.94로 수량 감소율도 동일하게 증가하였다.

가잠의 전염성 연화병 및 농핵병 바이러스 증식에 관한 연구 (Multiplication of Infectious Flacherie and Densonucleosis Viruses in the Silkworm, Bombyx mori)

  • 김근영;강석권
    • 한국잠사곤충학회지
    • /
    • 제25권2호
    • /
    • pp.1-31
    • /
    • 1984
  • 가잠에 있어서 피해가 많은 전염성 연화병(Flacherie Virus; FV)과 농핵병 바이러스(Densonucleosis virus; DNV)의 증식에 관한 연구를 행하기 위하여 서당밀도 구배 초원심분리법에 의한 양바이러스의 정제 및 전자현미경에 의한 관찰, 바이러스 감염잠의 중장과 체액에서의 핵산과 단백질의 변동 및 감염중장 피막세포의 전자현미경에 의한 병리조직학적 관찰 등, 일연의 조사를 통하여 다음과 같은 연구결과를 얻었다. 1. 서당밀도구배에 의한 초원심분리법을 이용하여 FV 및 DNV를 분획한 결과, base line이 낮고 좌우상칭의 단일 peak를 나타내는 전형적인 바이러스 분획을 얻었으며, 또한 이들 바이러스의 negative 염색에 의한 전자현미경 관찰에서 FV는 27nm, DNV는 21nm의 균일한 구형입자임이 확인되었다. 2. 두 바이러스 감염잠의 체중은 바이러스 접종 6일 후부터, 중장중은 바이러스 접종 3일 후부터 건전잠에 비해 뚜렷한 감소를 나타냈다. 3. DNA의 양적 변화는 FV 및 DNV 감염잠에서 공히 중장에서는 전기간을 통해 건전잠에서 보다 높았고, 체액에서는 바이러스 접종 초ㆍ중기에는 큰 변화가 없고 바이러스 접종 7일 이후에는 건전잠에서 보다 훨씬 낮았다. 4. RNA의 양적 변화는 FV 및 DNV 감염잠에서 다같이 바이러스 접종 초기에 중장에서는 건전잠에 비해 높았고, 체액에서는 건전잠에 비해 매우 낮았으나, 바이러스 접종 말기에는 중장 및 체액의 경우 공히 건전잠에서 보다 현저히 낮았으며 그 정도는 DNV 감염잠에서 더 심했다. 5. FV 및 DNV 감염잠에서 중장과 체액의 단백질은 바이러스 접종 중기까지는 건전잠에 비해 큰 변화가 없었으나, 접종 말기에서는 건전잠에서 보다 월등히 낮았다. 6. 바이러스 접종 8일 후의 FV 및 DNV 감염잠 중장 RNA 전기영동상은 건전잠의 중장 RNA인 26S, 17S, 5S 및 4S의 4종 band와 동일했다. 7. FV 및 DNV 감염잠의 중장 단백질 전기영동상은 바이러스 접종 1일과 5일 후에는 건전잠의 것과 큰 차이가 없고, 접종 8일 후에는 건전잠에 존재하는 이동도가 낮은 L band가 양 바이러스 감염잠에서는 공히 소실되는 반면, 건전잠에서 볼 수 없는 이동도가 중간인 M band가 새로이 나타났으며 비교적 이동도가 높은 건전잠의 N band는 양 바이러스 감염잠에서는 2개로 분리되었다. 8. 체액단백질의 전기영동상은 FV 및 DNV감염잠 공히 건전잠의 것과 유사하나, 바이러스 접종 8일 후에는 양적인 감소를 나타내어 건전잠의 약 40%에 지나지 않았다. 9. FV 감염중장조직을 pyronin-methyl green 2종 염색을 하여 광학현미경으로 관찰한 결과, 바이러스 접종 8일 후의 중장원동세포내에서 A형 및 B형 봉입체가 형성되었음을 확인하였다. 10. FV감염 중장조직세포의 전자현미경 관찰에서는 바이러스 접종 5일 후에 배상세포의 'cytoplasmic wall'이 비대해지고 그 내부에 virus-specific vesicle이 형성되었으며, 바이러스 접종 8일 후에는 virus-specific vesicle, 바이러스 입자, linear structure, tubular structure 및 전자밀도가 높은 matrix 등의 바이러스 감염에 대한 특이적인 구조물이 배상세포의 세포질에서 관찰되었으며, microvilli내에서 바이러스 입자의 존재도 확정되었다. 특히 virus-specific vesicle 주위에서는 전자밀도가 높은 구형의 바이러스 입자 유사체가 관찰되었는데, 이것은 virus-specific vesicle 주위에서 바이러스 조립이 일어나는 것을 추정된다. 한편 원통세포 내에서 봉입체 관찰되고, 변형소구화된 배상세포가 중장강으로 탈락되는 것이 관찰되었다. 11. DNV감염 중장조직을 acridine orange 염색을 하여 형광현미경으로 관찰한 결과, DNV접종 5일 후에 본 바이러스 증식 장소인 원동세포핵의 비대가 뚜렷이 관찰되었다. 12. 전자현미경에 의해 DNV감염 중장조직세포를 관찰한 결과, 바이러스 접종 5일 후에 원동세포 핵내의 인이 소형 과립으로 붕괴되어 산재되었고, 접종 8일후에는 전자밀도가 높은 virogenic stroma가 출현하였으며, 감염 말기로 추정되는 핵내의 전자밀도가 전자보다 낮고 더욱 확대되어 핵의 대부분을 차지하는 virogenic stroma도 관찰되었다. 또한 이들 virogenic stroma내에서 바이러스 입자유사체가 관찰되는 것으로 보아 이 virogenic stroma는 바이러스 전구물질의 합성 및 바이러스 조립장소임을 시사하고 있다.

  • PDF

전시장 참관객의 계획되지 않은 방문행동에 있어서 부스추천시스템의 영향에 대한 연구 (A Study on the Effect of Booth Recommendation System on Exhibition Visitors Unplanned Visit Behavior)

  • 정남호;김재경
    • 지능정보연구
    • /
    • 제17권4호
    • /
    • pp.175-191
    • /
    • 2011
  • 국가신성장동력으로MICE(Meeting, Incentive travel, Convention, Exhibition) 산업이각광받으면서국내전시산업에 대한 관심이 드높아 지고 있다. 이에 따라 국내 전시산업(domestic exhibition industry)도 미국이나 유럽과 같이 전시성과를 향상시키기 위한 다양한 연구가 진행 중이다. 그 중에서도 전시환경이나 전시기법 등에 따라 관람효과가 다르기 때문에 지능형 정보기술을 이용하여 전시장에 방문한 참관객의 참관패턴을 분석하여 참관객을 이해하고 더 나아가 참여업체 간의 연관관계 도출 및 전시회의 성과를 높이고자 하는 연구들이 진행되고 있다. 그런데, 이러한 기존의 부스추천시스템과 관련된 연구를 살펴보면 시스템적인 관점에서 추천의 정확성만을 논하고 있을 뿐 추천을 통한 참관객의 행동이나 인식의 변화에 대해서는 충분히 논의하고 있지 못하다. 부스추천시스템(Booth Recommendation System)은 참관객의 부스방문 정보를 바탕으로 참관객에게 적절한 부스를 추천하기 때문에 참관객은 사전에 계획하지 않은 전시장을 방문하게 될 수 있다. 이 때 참관객은 계획하지 않은 방문행동을 통해서 만족할 수도 있지만 추천과 정이 번거롭다거나 자유롭게 참관을 하는데 방해가 된다고 생각할 수 있다. 이 경우 참관객의 자유로운 관람보다 오히려 더 좋지 않은 성과를 낼 수 있다. 따라서 부스 추천시스템을 전시장에 적용하기 위해서는 시스템의 성과에 미치는 영향요인이 무엇인지 전반적으로 검토하고, 부스추천시스템이 참관객의 계획되지 않은 방문행동에 미치는 영향에 대해 면밀히 검토해야 한다. 이에 본 연구에서는 부스추천시스템의 성과에 영향을 미치는 요인이 무엇인지 이론과 기존문헌을 통해 살펴보고자 하였다. 또한, 참관객의 지각된 부스추천시스템의 성과가 참관객의 계획되지 않은 행동에 대한 만족도와 부스추천시스템의 재사용의도에 어떤 영향을 미치는지 살펴보고자 하였다. 이러한 연구목적을 달성하기 위한 이론적 프레임워크로 본 연구는 계획되지 않은 행동이론(Unplanned Behavior Theory)을 도입하였다. 계획되지 않은 행동(unplanned behavior)이란 "소비자들이 사전에 계획하지 되지 않은 채 실행된 어떤 행동"으로 정의할 수 있다. 소비자들의 계획되지 않은 행동은 그 동안 마케팅 등 다양한 분야에서 연구되어 왔다. 특히, 마케팅에서는 계획되지 않은 행동 중 계획되지 않은 구매(unplanned purchasing)에 많은 관심을 두어 왔는데 이 개념은 종종 충동적 구매(impulsive purchasing)와 혼동되어 사용되곤 하였다. 그런데, 충동적 구매가 갑자기 무엇인가 구매를 해야하는 강하고 지속적인 충동(urge)이라고 본다면 계획되지 않은 구매는 구매의사결정의 시점이 상점에 들어가기 전이 아닌 상점 내에서 수행된다는 점이 다르다. 즉, 모든 충동적 구매는 비계획적이나, 모든 계획되지 않은 구매가 충동적인 구매는 아니다. 그런데, 왜 소비자들은 계획되지 않은 행동을 하는가? 이에 대해서는 학자들에 따라 여러 가지 의견이 있으나 소비자가 사전에 철저한 계획을 수립하지 않고 따라서 중간에 계획을 변화시킬만한 유연성(flexibility)이 있기 때문이라는 점에 일관된 의견을 보인다. 즉, 계획되지 않은 행동을 하는데 많은 비용이 소요된다면 소비자들은 사전에 수립한 계획을 변경하기 어렵게 될 것이기 때문이다. 본 연구에서 살펴보고자 하는 전시장 역시 참관객들은 방문하기 전에 전시장이 어떤 프로그램으로 구성되어 있는지 살펴보고, 어떤 부스를 방문할지를 사전에 계획하게 된다. 그 이유는 참관객들이 전시장 방문에 투입할 수 있는 시간은 한정되어 있는 반면에 전시회는 대규모의 다양한 부스로 운영되기 때문에 참관객들이 모든 부스를 참관한다는 것이 현실적으로 불가능하기 때문이다. 따라서 본 연구에서 제시하는 부스추천시스템이 참관객이 선호할 만한 부스를 추천하게 되면 참관객은 자신의 계획을 변화시켜서 부스추천시스템이 추천한 부스를 방문하게 된다. 이러한 방문행동은 소비자가 상점을 방문하거나, 관광객이 관광지에서 계획하지 않은 행동을 하는 것과 유사한 측면에서 이해가 가능하며 특히 최근 여행소비자들이 정보기기의 영향으로 계획되지 않은 행동을 하는 경우가 부쩍 증가한 추세와 동일한 맥락에서 이해가 가능하다. 이에 다음과 같은 연구모형을 설정하였다. 이 연구모형은 참관객이 지각한 부스추천시스템의 성과(performance)를 매개변수로 하고 있는데 이 성과에 영향을 미치는 요인으로 부스추천시스템에 대한 신뢰(trust), 전시장 참관객의 지식수준 (knowledge level), 부스 추천시스템의 기대된 개인화 (expected personalization) 그리고 부스추천시스템의 자유위협(threat to freedom)을 영향요인으로 파악하였다. 또한, 지각된 부스추천시스템 성과와 계획되지 않은 행동에 대한 참관객의 만족도와 향후 부스추천시스템의 재사용의도간의 인과관계도 파악하고자 하였다. 이 때 부스추천시스템에대한신뢰는권한(competence), 자선(benevolence), 그리고진실(integrity)의2차요인(2nd order factor)으로구성하고, 나머지 요인들은 1차 요인으로 구성하였다. 이를 검증하기 위해 2011 DMC Culture Open 행사에서 부스추천시스템을 테스트하기 위하여 시스템을 개발하고, 101명의 참관객을 대상으로 실증조사를 하여 분석하였다. 분석결과 첫째, 부스추천시스템에 있어서 참관객의 신뢰가 가장 중요한 요소이며 실제 해당 부스추천시스템을 이용한 참관객들은 신뢰를 통해 부스추천시스템이 성과 있다고 인식하였다. 둘째, 참관객의 지식수준 역시 부스추천시스템의 성과에 유의한 영향을 미쳤는데 이는 추천의 성과가 전시장에 대한 사전적 이해가 필요함을 의미한다. 즉, 전시장에 대한 이해가 높은 참관객이 부스추천시스템의 유용성을 더 잘 파악하는 것으로 나타났다. 셋째, 기대된 개인화 수준은 성과에 유의한 영향을 미치지 못했는데 이는 기존 연구와 다른 결과로 본 연구에 사용된 부스추천시스템이 충분히 개인화 서비스를 제공하지 못했기 때문이라고 판단된다. 넷째, 부스추천시스템의 추천정보는 개인의 자유를 위협하거나 제한한다고 느끼지 않음으로 충분히 유용한 가치를 갖는다고 할 수 있다. 끝으로 부스정보시스템의 높은 성과는 참관객들의 계획되지 않은 행동에 대한 높은 만족도와 향후에도 부스추천시스템을 재사용할 의도를 만드는 것으로 나타났다. 이와 같이 본 연구는 부스추천시스템이 야기하는 참관객의 계획되지 않은 부스방문행동에 미치는 영향력을 분석하기 위해 계획되지 않은 행동이론을 중심으로 실증자료를 이용하여 분석하고, 이를 통해 향후 부스추천시스템의 구축 및 설계에 유용한 시사점을 도출할 수 있었다. 향후에는 보다 정교한 설문구성과 측정대상을 이용하여 추가적인 검토가 필요할 것으로 기대된다.

단수수(Sorghum vulgare PERS) 품종의 생태변이 및 유용형질의 유전에 관한 연구 (Studies on Ecological Variation and Inheritance for Agronomical Characters of Sweet Sorghum Varieties (Sorghum vulgare PERS) in Korea)

  • 손세호
    • 한국작물학회지
    • /
    • 제10권
    • /
    • pp.1-43
    • /
    • 1971
  • 실험 I. : 본 실험은 단수수에 대하여 재배시기를 이동함에 따르는 실용 제형질의 변화를 구명하기 위하여 1968~1969년까지 2개년에 거쳐 작물시험장 특용작물 연구실(수원)에서 시행되었으며 품종은 조만생, 초형, Syrup형, Sugar형 등 생태적 특성을 달리한 17개품종이 공시되었으며 묘종기 양년 모두 4월 5일부터 8월 25일까지 20일 간격으로 8회에 걸쳐 파종하여 조사한 바 그 결과를 요약하면 다음과 같다. 1. 발아기(발아일수)는 파종기를 앞당겨 저온하에 파종하면 발아에 소요되는 일수가 많고 파종기가 늦어서 기온이 상승됨에 따라 발아 일수가 직선적으로 단축되다가 8월 25일 이후의 파종부터는 다시 지연되는 경향이었다. 발아기간의 일평균온도와 발아일수간에는 높은 부상관관계가 있으나 이와는 반대로 발아일수와 적산온도간에는 고도의 정상관이 인정되었다. 2. 파종기의 지연에 따라 출수일수는 거의 직선적으로 단축된다. 공시된 품종간에 평균출수일수차는 30.2일이란 큰 차이가 있었다. 이들을 10일간격으로 조, 중, 만생군으로 구별하면 조생군은 평균출수일수가 78.5$\pm$4.5일범위에 속하고 중생군은 88.5$\pm$4.5일, 만생군은 98.5$\pm$4.5일로 되었다. 출수단축한계 종종기는 조생군이 제VI-VII파종기인 7월 15일$\pm$8월 5일까지이고 중생군은 제VI파종기인 7월 15일까지, 만생군은 제IV파종기인 6월 5일까지이었다. 3. 파종기(x)와 출수까지의 일수(y)와의 회귀직선식 y=a+bx의 손수(출수까지의 일수의 단축율)와 평균출수까지의 일수와는 고도의 정상관관계가 있었다. 4. 파종에서 출수기까지의 생육경과에 있어서 일평균기온이 높을수록 출수일수가 단축되어 조생종은 24.2$^{\circ}C$에서, 중생종은 23.8$^{\circ}C$에서, 만생종은 22.9$^{\circ}C$에서 최대단축율을 보이었고 따라서 출수전 30일간의 평균기온이 약 22$^{\circ}C$부터 $25^{\circ}C$에 이르기까지 가속적으로 출수소요일수가 단축되다가 그뒤 약 21$^{\circ}C$이하가 됨에 따라 다시 지연되는 경향이었다. 5. 초장의 절대치는 품종간에 차이는 있으나 비교적 조파구간에는 초장에 큰 변이가 없었고 파종기가 늦어짐에 따라 짧아졌다. 초장의 신장속도는 파종기가 늦어짐에 따라 현저하게 빨라지고 특히 조생종이 만생종보다 더욱 가속적인 경향이었다. 따라서 최고초장과 최저초장과의 절대치의 차이는 조생종일수록 적고 만생종일수록 큰 격차를 보이었다. 6. 간직경에 있어서도 만생종은 일반적으로 조기파종할수록 굵고, 조생종과 중생종은 4월 25일 파종기가 가장 굵은 편이며 이보다 파종기가 지연 가늘어지는 경향이었다. 7. 간중은 품종의 조만생에 따라 약간의 차이는 있으나 대체로 적기(4월 25일~5월 15일)보다 조기 혹은 만기 파종하면 작아지나 파종기 이동에 따른 간중의 변화는 품종의 조만성에 따라 양상을 달리하여 조생종은 4월 25일 내외, 중생종은 4월 25일~5월 15일 내외, 만생종은 4월 5일~5월 15일 내외의 파종기에서 최고수량에 달하고 이후 직선적으로 감소하였다. 8. Brix 도는 품종에 따라 절대치가 다르며 또한 파종기가 5월 15일 이후로 늦어짐에 따라 직선적으로 감소되어 파종기(x)와 Brix 도(y) 간에 고도의 부상관관계를 볼 수 있었다. 9. 출수후 40~45일경의 절간부위별 Brix 도는 상부 제 1~제3절간 부위가 최고에 달하고, 제4절간부터 서서히 낮아지다가 지상 제2절부위에 가서 다시 약간 높아지는 경향이었다. 그러나 출수전까지는 이와 반대의 경향이었다. 10. 간중당분에 대한 파종기별 축적상황은 파종기가 지연됨에 따라 거의 직선적으로 낮아지며 품종에 따라 차이는 있으나 6월하순 이후의 파종기는 당원료작물로서 거의 무가치한 낮은 함량을 나타내었다. 11. Brix도 및 간중당분은 출수기부터 축적이 시작되어 출수후 약 40~45일에 최고에 달하고 순당율도 같은 경향으로 생육의 진전과 더불어 높아져서 순당율과 Brix 도간, 순당율과 간중당분간에 각각 높은 정의 상관관계가 존재한다. 12. 가제당량과 파종기간의 관계를 보면 중생종과 만생종은 4월 25일, 중생종은 5월 15일 파종기가 최고에 달하고 이보다 파종이 지연됨에 따라 급격히 감소되는 경향으로 파종기(x)와 가제당량(y)사이에 1% 이상의 높은 부의 상관을 보았다. 13. 파종기 및 제형질간의 상호관계를 보면 파종기가 지연됨에 따라 발아일수, 발아기간의 적산온도, 출수일수, 출수일수까지의 적산온도, 초장, 간직경, 간중, Brix 도, 간중당분, 순당율, 가제당량 등은 모두 고도의 부상관 및 회귀관계이었고 출수일수(x)와 Brix도, 당도, 순당율, 가제당량, 초장, 간장(y)등 간, Brix 도(x)와 순당율, 가제당량, 간중(x)과 가제당량(y)간, 또한 출수시의 일장(x)과 Brix 도, 출수일수, 당도, 순당율, 가제당량(y) 등 간에는 고도의 정상관을 인정할 수 있었다. 실험 II: 실험 I에 공시된 품종중에서 생태 및 유전적으로 다른 11품종만을 이면교배법에 의하여 교잡된 F$_1$ 및 교배친의 출수기, 간장, 간중, Brix 도 및 Syrup yield 등에 대하여 우성정도, 교배조합능력 및 유전분석을 한 결과를 요약하면 다음과 같다. 1. 출수기는 조, 만숙방향으로 완전 혹은 초월우성인 특정조합이 있기는 하나 대체적으로 중간성 및 부분우성이었고 GCA 및 SCA가 높은 특정조합친을 인정할 수 있었다. 따라서 출수에 관여하는 유전인자의 분배비는 50:50으로 추정되었으며 유전력도 높아서 초기세대부터 선발이 가능할 것으로 본다. 2. 간장은 잡종강세도가 높았으며 장간의 방향으로 초월성인 특정조합도 있으나 완전 혹은 부분우성으로 추정된다. GCA 및 SCA는 일반적으로 높은 편이었으며 관여된 우성 및 열성유전자는 거의 50:50으로 분배되며 유전력은 낮았다. 3. 간중은 대부분 정의 방향(다수)으로 완전우성에 가까운 부분우성으로 작용하나 특정조합에 따라 초월우성인 것과 부분우성인 것이 있었다. GCA와 SCA는 비교적 높은 교배친을 인정할 수 있으며 유전자의 작용방향은 열성유전자가 많이 관여되고 복잡한 분리가 일어날 것으로 추정되며 유전력은 비교적 낮았다. 4. Brix 도에 대한 우성정도 및 방향은 교배조합에 따라 고 Brix 및 저 Brix로 나타났으나 일반적으로 초우성 내지 완전우성으로 나타났고 GCA 및 SCA는 Brix 도가 높은 품종일수록 높은 경향이므로 고당성 육종에는 역시 높은 당분함량을 가진 교배친이 유리할 것으로 추정된다. 5. Syrup 종에 대한 우성정도는 많은 방향으로 초월 혹은 완전우성으로 추정되며 잡종강세도는 대단히 높았다. GCA와 SCA의 관계는 일정하지 않으며 GCA가 높은 품종은 SCA가 낮은 경향이었다. 교배친의 우성대립인자 대 열성대립인자의 빈도는 거의 동수로 나타날 것으로 추정된다.

  • PDF

High Resolution HC$_3$N Observations toward the Central Region of Sagittarius B2

  • H.S-Ching;Oh, M.ishi;M.Morimoto
    • 한국우주과학회:학술대회논문집(한국우주과학회보)
    • /
    • 한국우주과학회 1993년도 한국우주과학회보 제2권2호
    • /
    • pp.17-17
    • /
    • 1993
  • The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

  • PDF