• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.5
• /
• pp.463-470
• /
• 2006

This paper deals with a new 3-phase power quality disturbance generator. The proposed generator can provide phase jump as well as voltage sag, swell, outage, unbalance, and over and under voltage. The operating principle of the generator is described in each mode of disturbance. The magnitude of the phase jump is analysed and it is found that the magnitude is the function of the turn-ratios of the transformers consisting the generator. The scheme has simple structure compared with the conventional one, and the major components of the proposed scheme are SCR thyristor and transformer, which guarantees high reliability and cost-effective implementation of the generator. Furthermore, high efficiency can be obtained because there is no PWM switching of the semiconductor devices, and it is easy to control the system. Simulations are carried out to confirm the operation in each disturbance mode, and experiments has been done with 5kVA power rating. The usefulness of the proposed scheme is verified through simulation and experimental results. It is expected that the scheme can be applied to the performance test of the custom power devices such as UPS, DVR, DSTATCOM, and SSTS with cost-effective system.

• New & Renewable Energy
• /
• v.5 no.3
• /
• pp.4-12
• /
• 2009

The effect of change in DFIG (doubly-fed wind power generator) rotating speed and active power on the grid was analyzed to understand the characteristics of wind power using the wind power simulator connected to the grid at Gochang Power Quality Test Center. Electric power quality improvement devices (DVR, STATCOM, SSTS) and electric power quality disturbance application devices for 22.9 kV grid are equipped at Gochang Power Quality Test Center. Induction motor and VVVF inverter were used to emulate the blade of a wind power generator, and a simulator for Cage wound induction generator and DFIG was developed. The trial line were assumed to be 20 km and 40 km in length, and variable wind speed pattern was set using wind speed data from Ducjeokdo to verify the power characteristics of the wind power generator according to rotating speed.

• The Korean Journal of Quaternary Research
• /
• v.19 no.2
• /
• pp.50-54
• /
• 2005

Some basic summer precipitation features over East Asia during the $20^{th}-21^{st}$ century as simulated / projected by the 22 coupled climate models under the IPCC AR4 program are investigated. Keeping in view that these are climate runs without prescribed SSTs, models perform well in simulating the regional annual cycle, spatial patterns (not shown) and the inter-annual variability. The projections under the 1% increase in $CO_2$ compounded until reaching double and held constant thereafter reveal that (a) Precipitation is likely to increase in all the months in particular during the summer monsoon (JJA) months. (b) The mean summer monsoon rainfall can increase from 4.2 to 13.5% and its variability is also likely to increase in the warming world due to increase in $CO_2$ (c) Extreme excess and deficient seasonal monsoons are likely to become more intense (not shown here) (d) Once the increase in $CO_2$ is cut-off, the system will reach a state of equilibrium, and then the rate of increase in precipitation is also expected to remain constant.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.864-867
• /
• 2006

Thermal infrared images of Landsat-5 TM and Landsat-7 ETM+ sensors have been unrivalled sources of high resolution thermal remote sensing (60m for ETM+, 120m for TM) for more than two decades. Atmospheric effect that degrades the accuracy of Sea Surface Temperature (SST) measurement significantly, however, can not be corrected as the sensors have only one thermal channel. Recently, MODIS sensor onboard Terra satellite is equipped with dual-thermal channels (31 and 32) of which the difference of at-satellite brightness temperature can provide atmospheric correction with 1km resolution. In this study we corrected the atmospheric effect of Landsat SST by using MODIS data obtained almost simultaneously. As a case study, we produced the Landsat SST near the eastern and western coast of Korea. Then we have obtained Terra/MODIS image of the same area taken approximately 30 minutes later. Atmospheric correction term was calculated by the difference between the MODIS SST (Level 2) and the SST calculated from a single channel (31 of Level 1B). This term with 1km resolution was used for Landsat SST atmospheric correction. Comparison of in situ SST measurements and the corrected Landsat SSTs has shown a significant improvement in $R^2$ from 0.6229 to 0.7779. It is shown that the combination of the high resolution Landsat SST and the Terra/MODIS atmospheric correction can be a routine data production scheme for the thermal remote sensing of ocean.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.249-250
• /
• 2008

본 논문은 고창 전력품질 실증시험장에서 실 계통 연계를 위해 시험 중인 1.5M급 풍력발전 시뮬레이터의 선로정수를 PSCAD/EMTDC를 이용하여 모의하고 선로정수에 따른 풍력발전시스템이 계통에 미치는 영향을 분석하는데 중점을 두었다. 현재 고창에 설치되어있는 전력품질 실증시험장은 22.9kV 급전선에 SSTS(Synchronous Static Transfer Switch)의 한쪽 스위치로 직접 연결되어있으며 다른 한 쪽은 전력계통에서 발생되는 다양한 형태의 이벤트를 발생시키는 SSHG(Sag Swell Harmonics Generator)를 통하여 연결되어있다. 전력품질 향상기기중 하나인 DVR(Dynamic Voltage Restorer)는 SSTS의 부하쪽으로 직렬로 연결되어있으며 delta-wye 변압기를 통해 정류기 부하와 APF(Active Power Filter), 그리고 순저항부하와 유도성부하가 연결되어 있고 또한 SSHG를 통하여 연결된 배전선에는 DSTATCOM(Distribution Static Compensator)가 병렬로 연결되어있다. 본 논문에서는 고창에 있는 풍력발전 시뮬레이터와 동일하게 PSCAD/EMTDC로 구성하였으며 선로정수를 모델링 하기 위해 선로모델을 10Km, 20Km, 30Km, 40Km,로 설정하여 선로정수에 따른 계통영향을 분석하여 풍력발전 시뮬레이터에서 모의가능 한 선로정수 값을 제시한다.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.9
• /
• pp.489-497
• /
• 2020

The introduction of self-service technologies (SSTs) in retail stores aims to provide customers with a more satisfying shopping experience. Many retailers are increasingly turning toward the adoption of self-service technologies in providing services directly to customers. Given that previous SST research has focused mainly on the impact of the introduction of SST on customer responses, the present study explored the impact of the presence of employees in the relationship between SST and customer responses. Based on the two ground theories, motivation-based theories of behavior and social impact theory, this study tested the relationships between shopping motivations, SST use intention, and retailer attitude. Moderating effects of the presence of employees on the three relationships were also tested. Data were collected using an online survey and analyzed through structural equations modeling. Test results showed that both hedonic and utilitarian shopping motivations effect on SST use intentions, and SST use intentions effect on retailer attitude, subsequently. Although the presence of employee did not moderate the relationship between shopping motivations and SST use intentions, the employee presence moderated the relationship between SST use intentions and retailer attitude. The impact of SST use intentions on retailer attitude was higher in the high presence of employee group than in the low group.

• Korean Journal of Remote Sensing
• /
• v.22 no.1
• /
• pp.11-24
• /
• 2006

Coastal sea surface temperature (CSST) and meteorological data from January through December 1995 are used to estimate the net surface heat flux and heat content for Sendai Bay. The average annual surface heat flux in the area north of the bay is estimated to be $+35Wm^{-2}$, whereas the southwestern area is estimated to be $+56Wm^{-2}$. Therefore, the net surface heat flux shows a net gain of heat over the whole bay. The largest heat gain occurs near Matsukawaura, where the strong Kuroshio/Oyashio interaction produces anomalously cold SST and wind is more moderate than in other regions of Sendai Bay over most of the year. The lowest heat gain occurs around Tashiro Island, where the temperature difference between air and sea surface is lower and wind is stronger. The heat budget shows that both surface forcing and horizontal advection are potentially important contributors to the seasonal evolution of CSST in the bay. From the A VHRR and SeaWiFS data, it is found that offshore conditions between the bay and Eno Island are different due to the presence of the Ojika Peninsula. It is also shown that the temporal behaviors of SSTs in the bay are closely connected with the air-sea heat flux and offshore conditions.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.43 no.5
• /
• pp.634-648
• /
• 2019

Self-service technologies (SST) are rapidly changing the way customers participate in the purchasing process. Academic literature has focused on the acceptance of SSTs. However, this study explored consumer's cognitive response and purchase intentions through service qualities of SST as well as how they are moderated by technology anxiety and other people's presence based on TAM3. An online survey collected 279 consumer panels. All responses were used for the analysis and analyzed statistically through SPSS 23.0. The results indicate that only enjoyment and control had a significant effect on warmth perception; however, all service qualities had significant effects on competence perception. The perceived warmth and perceived competence partially mediated the relationship between SST service qualities and purchase intention. The moderating effect of technical anxiety was shown to be significant in the relationship between perceived competence and purchase intention. In addition, technology anxiety had a moderating effect on the relationship between competence perception and purchase intention only in a public situation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.338-338
• /
• 2019

설계강우량 산정시, 일반적으로 극치자료를 활용하여 정상성 가정하에 빈도해석을 수행하고 있다. 그러나 종종 정상성으로 가정했던 기존 극치강우자료가 정상성 빈도해석 모형에서 효과적으로 모델링되지 않는 비정상성 특성을 나타내고 있다. 또한, 대부분의 극치강우 분포는 해마다 다른 규모로 발생하는 홍수와 태풍 등의 강우요인으로 인해 두 개의 첨두를 갖는 혼합분포 형태를 보인다. 이에 본 연구에서는 혼합분포 기반 비정상성 빈도모델(mixture distribution based nonstationary frequency model, MDNF)을 제시하였다. 제안된 모형의 입력자료로 기후변수(e.g. SSTs and SLPs)를 사용하여 두 개의 분포형으로 구성되는 극치강우의 혼합비(mixing ratio)에 대한 영향을 분석하였으며, 극치강우 패턴이 특정 기후변수의 영향을 받는 것을 확인하였다. 최종적으로 Bayesian 기법을 MDNF 모형에 연계하여 각 첨두에 해당하는 분포형의 매개변수들에 대한 불확실성 구간을 정량적으로 제시하였다. 본 연구를 통해 강우 패턴의 변동은 설계 강우량 추정에 영향을 미치며, 특정 기후변수와 강우 패턴이 상관성을 가지는 것을 확인함으로써 합리적인 설계 강우량 산정을 위한 중요한 근거를 제공할 것으로 사료된다.

• Geomechanics and Engineering
• /
• v.16 no.5
• /
• pp.547-558
• /
• 2018

Studies of soil dynamic properties in Malaysia are still very limited. This study aims to investigate the dynamic properties of two selected tropical residual soils (i.e., Sandy Clay and Sandy Silt) and a sand mining trail (Silty Sand) in Peninsular Malaysia using 1g shaking table test. The use of 1g shaking table test for soil dynamic testing is often constrained to large strain level and small confining pressure only. Three new experimental setups, namely large laminar shear box test (LLSBT), small chamber test with positive air pressure (SCT), and small sample test with suction (SSTS) are attempted with the aims of these experimental setups are capable of evaluating the dynamic properties of soils covering a wider range of shear strain and confining pressure. The details of each experimental setup are described explicitly in this paper. Experimental results show that the combined use of the LLSBT and SCT is capable of rendering soil dynamic properties covering a strain range of 0.017%-1.48% under confining pressures of 5-100 kPa. The studied tropical residual soils in Malaysia behaved neither as pure sand nor clay, but show a relatively good agreement with the dynamic properties of residual soils in Singapore. Effects of confining pressure and plasticity index on the studied tropical residual soils are found to be insignificant in this particular study.