• Journal of Animal Science and Technology
• /
• v.45 no.2
• /
• pp.283-296
• /
• 2003

Emulsion-type sausages were manufactured to investigate the effects of CLA-vegetable oils and CLA-lard on quality characteristics of emulsion-type sausage. Each treatments replaced pork back fat with CLA-corn oil (CLA-CO), CLA-safflower seed oil (CLA-SSO) and CLA-lard (CLA-LD) were stored during 1, 7, 14, 21 and 28 days at 4$^{\circ}C$. The changes in physico-chemical properties, texture, thiobarbituric acid reactive substances (TBARS), fatty acid composition and CLA content of each treatments were measured during 1, 7, 14, 21 and 28 days at 4$^{\circ}C$. During storage, pH of control showed higher pH value than that of CLA-vegetable and CLA-lard treatments. The pH values of all treatments was significantly low at storage 14 days (p<0.05). The color L* and a*-value of all the treatments was not significantly changed with the storage periods. Color b*-value of CLA-treatments was higher than that of control during the storage period. Fatty acids composition was changed by addition of CLA-vegetable oils and CLA-lard. All kinds of fatty acids composition were decreased with CLA replacements than that of the control. Whereas linolenic acid content extremely increased by replacement of CLA-vegetable. CLA content of CLA-treatments was extremely increased than that of the control. The cohesiveness, springness, gumminess and brittleness of CLA-LD treatment was significantly higher (P<0.05) than that of the other treatments. The TBARS value of all treatments were significantly increased (P<0.05) as the storage period was passed. TBARS of sausage products containing CLA-CO was the lowest. Summing up the a forementioned results, emulsion-type sausage manufacturing with CLA-vegetable oil and CLA-lard was not affected in physico-chemical properties and texture characteristics. Also, it may be assumed that the high quality sausage can be manufactured with the extent of storage period and CLA accumulation.

• Journal of Aerospace System Engineering
• /
• v.14 no.5
• /
• pp.107-121
• /
• 2020

The performance analysis of the small satellites launch vehicle using the electric pump cycle as the upper stage engines was performed. The first stage is the launch vehicle that uses the test launch vehicle of the Korea Space Launch Vehicle II and the second stage employs elecpump cycle engine that uses liquid methane and kerosene (RP-1) as fuel. A model for the mass estimation was presented and the analysis was conducted for the range of thrust of 20 to 40 kN and combustion pressure of 3 to 6 MPa with a nozzle expansion ratio of 60 to 100. The mixture ratio with the maximum velocity increment was calculated and the performance of the LEO and SSO payload were calculated from the stage mass estimation. In both the cases, liquid methane, and RP-1 showed maximum payload for 20 kN thrust, 3 MPa combustion pressure, and the nozzle expansion ratio of 100, with a mixture ratio of 3.49 for liquid methane and 2.75 for RP-1. In addition, the ditching points of the first stage and the fairing in the LEO mission were analyzed using ASTOS.

• Journal of Astronomy and Space Sciences
• /
• v.23 no.4
• /
• pp.319-326
• /
• 2006

We present light curves of a short period binary system BL Eridani. The light curves were observed with VRI filters by a 50cm wide field robotic telescope at Siding Spring Observatory (SSO), equipped with a 2K CCD camera, which was developed by Korea Astronomy and Space Science Institute (KASI), and Yonsei University Observatory(YUO). The photometric observations were made on 6 nights by automatic operation mode and remote observation mode at SSO and KASI in Korea, respectively. We obtained new VRI CCD light curves and new 5 times of minima, and analyzed the light corves with the Wilson & Deviney (1971) binary 2005 version and derived the new photometric solutions. The mass ratio q=0.48 in this study shows different value with earlier investigators. According to the model analysis, it is considered that the BL Eri system is currently undergoing contact stage of the two binary components, rather than near-contact stage.

• Journal of Broadcast Engineering
• /
• v.14 no.4
• /
• pp.463-474
• /
• 2009

By employing the subscriber concept in broadcasting services, IPTV (Internet Protocol Television) operators provide various grades of services to subscribers based on the billing level of the subscribers. With the income from subscribers for a basis, IPTV operators plan to provide high quality services. Since Web browser-based IPTV provides T-commerce and E-commerce services as well as television services, users may frequently visit other service domains to buy goods or content. To provide the user with charged or private services, these service domains request authentication of user. The existing authentication system is not appropriate for the IPTV service environment because the environment unavoidably forces the user to cross from one authentication-based service domain to another. Single sign-on provides a user with transparent authentication services by enabling an authenticated user to move between authentication-based service domains without any re-authentication. Like this distributed environment, since the IPTV service environment also provides a variety of authentication-based services, transparent authentication service needs to be provided to subscribers who want to access charged or private services. In this paper, we propose a new user authentication scheme for the IPTV environment. This scheme integrates the Security Assertion Markup Language (SAML), which is a standard for XML-based single sign on. We validate this scheme using a simple use case scenario.

• Journal of Astronomy and Space Sciences
• /
• v.27 no.2
• /
• pp.153-160
• /
• 2010

We modified the optical system of 500 mm wide-field telescope of which point spread function showed an irregularity. The telescope has been operated for Near Earth Space Survey (NESS) located at Siding Spring Observatory (SSO) in Australia, and the optical system was brought back to Korea in January 2008. After performing a numerical simulation with the tested value of surface figure error of the primary mirror using optical design program, we found that the surface figure error of the mirror should be fabricated less than root mean square (RMS) $\lambda$/10 in order to obtain a stellar full width at half maximum (FWHM) below $28\;{\mu}m$. However, we started to figure the mirror for the target value of RMS $\lambda$/20, because system surface figure error would be increased by the error induced by the optical axis adjustment, mirror cell installation, and others. The radius of curvature of the primary mirror was 1,946 mm after the correction. Its measured surface figure error was less than RMS $\lambda$/20 on the table of polishing machine, and RMS $\lambda$/15 after installation in the primary mirror cell. A test observation performed at Daeduk Observatory at Korea Astronomy and Space Science Institute by utilizing the exiting mount, and resulted in $39.8\;{\mu}m$ of stellar FWHM. It was larger than the value from numerical simulation, and showed wing-shaped stellar image. It turned out that the measured-curvature of the secondary mirror, 1,820 mm, was not the same as the designed one, 1,795.977 mm. We fabricated the secondary mirror to the designed value, and finally obtained a stellar FWHM of $27\;{\mu}m$ after re-installation of the optical system into SSO NESS Observatory in Australia.

• The Korean Journal of Physiology
• /
• v.20 no.2
• /
• pp.225-235
• /
• 1986

Effects of anions on p-Aminohippurate (PAH) transport across the basolateral membrane (BLM) were studied. Basolateral membrane vesicles were isolated from rabbit renal cortex by using a self-orienting Percoll-gradient centrifugation and $Mg^{2+}-precipitation$. The characteristics of the membrane vesicles was examined by marker enzyme activity, membrane orientation and transport studies. The Na-K-ATPase activity in the fraction containing BLM vesicles was enriched 9·fold, and the alkaline phosphatase activity in the fraction containing BBM vesicles was increased 9-fold, compared with those of the homogenate. The transport properties of the two membrane preparations were studied by a rapid filtration technique. The uptake of PAH by BLM was sensitive to changes in medium osmolarity and inhibited by probenecid. When the uptake of $50{\mu}M$ PAH in voltage-clamped BLM vesicles was determined in the presence of various anions in the incubation medium, cis inhibitions by $SO_4\;and\;SSO_3$ were observed in the presence of sodium gradient (out>in). Sodium-dependent PAH uptake was inhibited competitively by external $SO_4$ PAH uptake in BLM vesicles loaded with 20 mM acetate and $SO_4\;or\;200\;{\mu}M$ PAH was significantly stimulated as compared with unloaded vesicles. The extent of trans-stmulation of PAH uptake by $SO_4$. was increased with the inside concentration of $SO_4$. This trans-stimulatory effect by $SO_4$, was observed to be additive in the presence of Na gradient and completely inhibited by 2 mM probenecid and 1 mM SITS. These results demonstrate that PAH/anion exchange is present in BLM of renal cortex and in this exchange mechanism inorganic as well as organic anions are involved as substrates.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.1
• /
• pp.159-167
• /
• 2000

In recent years, combined and separated sewer overflows (CSOs, SSOs) have been recognized as a significant pollution problem. To solve this problem a series of experiments were performed in a small scale Rapid Floc Settler (RFS) device to determine its ability in removing micro particles and dissolved materials from polluted waters. The RFS device is a compact physico-chemical wasterwater treatment system. Polyacrylamide (PAM) is used as a coagulant for treating stormwater in the RFS. The results of Jar test showed that PAM could be an excellent coagulant as compared with aluminum sulfate. and ferric chloride. In several experimental conditions, the influence of different variation parameters was tested to measure the efficiency of the RFS. Tests have been carried out with typical CSOs concentrations (50~1.000mg SS/L). The treatment efficiency with regard to SS and COD, which can be obtained at an overflow rate of $130m^3/m^2/day$, are 90% and 80%, respectively. Comparing other sedimentation technologies with RFS, the overflows rate of RFS is ten times faster. The distribution of particle size and number were analyzed. The RFS is suitable for the treatment of CSOs and also the removal of settleable and dissolved materials in urban stormwater runoff.

• The Journal of the Korea Contents Association
• /
• v.22 no.9
• /
• pp.64-75
• /
• 2022

The method of accessing multiple control systems in the OT control network centered on operation technology uses the operator authentication technology of each control system. An example is ID/PW operator authentication technology. In this case, since the OT control network is composed of multiple control systems, operator authentication technology must be applied to each control system. Therefore, the operator must bear the inconvenience of having to manage authentication information for each control system he manages. To solve these problems, SSO technology is used in business-oriented IT networks. However, if this is introduced into the OT control network as it is, the characteristics of the limited size of the OT control network and rapid operator authentication are not reflected, so it cannot be seen as a realistic alternative. In this paper, a public key-based authentication mechanism was newly proposed as an operator authentication technology to solve this problem. In other words, an integrated public key certificate that applies equally to all control systems in the OT control network was issued and used to access all control systems, thereby simplifying the authentication information management and making access to the control system more efficient and secure.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.3
• /
• pp.32-42
• /
• 2022

The strategy to develop a launch vehicle family by bundling multiple rocket engines of a single type has been proven by SpaceX and their reusable fleet comprised of Falcon 9 and Falcon Heavy. In this study, we revisit a potential launch vehicle family out of a 35 tonf-class methalox staged combustion cycle engine and evaluate their utility and performance in various space missions. For example, a Korean version of Falcon 9 can deliver 4.7 tons of payload into 500 km SSO in an expendable mode while the payload is reduced to 2.16 tons in a sea-landing reusable mode. A Korean version of Falcon Heavy can deliver 4.4 tons into GTO when launched from the Naro Space Center, indicating that this common booster core configuration can handle Cheollian 2 albeit the high inclination. Once developed, the same methaloax engine can power the first-stage of smallsat launch vehicles and air launch vehicles.

• Journal of Internet Computing and Services
• /
• v.8 no.5
• /
• pp.59-66
• /
• 2007

In korea, TIT(Transport Information Technology) based IP-TV services have been provided in Saemaeul trains and some sections of subway trains, But the software systems for the service performed in alternated fashions and suffered from many problems such as suspension, memory leaking and overflow, These problems increased playback loss time and resulted in bad reliabilities, In this paper, a software TIT monitor is designed and implemented for Monitoring module and Reset module in physically poor environments, The designed system formalized monitoring time intervals for effective monitoring, Through the real experiments, playback time is improved in 7.2% comparing to existing system.