• Journal of Microbiology and Biotechnology
• /
• v.27 no.9
• /
• pp.1649-1656
• /
• 2017

In simultaneous saccharification and fermentation (SSF) for production of cellulosic biofuels, engineered Saccharomyces cerevisiae capable of fermenting cellobiose has provided several benefits, such as lower enzyme costs and faster fermentation rate compared with wild-type S. cerevisiae fermenting glucose. In this study, the effects of an alternative intracellular cellobiose utilization pathway-a phosphorolytic pathway based on a mutant cellodextrin transporter (CDT-1 (F213L)) and cellobiose phosphorylase (SdCBP)-was investigated by comparing with a hydrolytic pathway based on the same transporter and an intracellular ${\beta}$-glucosidase (GH1-1) for their SSF performances under various conditions. Whereas the phosphorolytic and hydrolytic cellobiose-fermenting S. cerevisiae strains performed similarly under the anoxic SSF conditions, the hydrolytic S. cerevisiae performed slightly better than the phosphorolytic S. cerevisiae under the microaerobic SSF conditions. Nonetheless, the phosphorolytic S. cerevisiae expressing the mutant CDT-1 showed better ethanol production than the glucose-fermenting S. cerevisiae with an extracellular ${\beta}$-glucosidase, regardless of SSF conditions. These results clearly prove that introduction of the intracellular cellobiose metabolic pathway into yeast can be effective on cellulosic ethanol production in SSF. They also demonstrate that enhancement of cellobiose transport activity in engineered yeast is the most important factor affecting the efficiency of SSF of cellulose.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.53-53
• /
• 2023

본 연구에서는 토양의 동결-융해 상태 구분을 위해 영상레이더(Synthetic Aperture Radar) 자료를 활용해 지표상태인자(Surface State Factor, SSF)를 산정하고, 관측 토양수분 자료 및 지표면 온도(Land Surface Temperature, LST) 자료와의 비교를 통해 SSF의 정확도를 분석하였다. SSF 산정은 용담댐 유역을 포함한 인근 40×50 km²의 영역(N35°35'~36°00', E127°20'~127°45')에 대한 9개의 토양수분 관측지점(계북, 천천, 상전, 안천, 부귀, 주천, 장수읍, 진안읍, 무주읍)을 대상으로 연구를 수행하였으며, 이를 위해 2015년부터 2019년까지의 해당 지점의 토양수분 관측자료와 Sentinel-1A Interferometric Wide swath (IW) 모드의 Ground Range Detected (GRD) product를 구축하여 활용하였다. SSF 자료의 정확도 분석을 위한 토양수분 관측지점에 대한 LST 자료는 인근 7개 기상관측소 지점(전주, 금산, 임실, 남원, 장수, 함양군, 거창)의 관측자료로부터 역거리가중법을 통해 산정하였다. Receiver Operating Characteristic (ROC) 분석을 통한 겨울철(12-2월)의 SSF 산정 정확도를 평가한 결과, 지표면 온도 자료와의 평균 정확도는 0.75(0.48-0.87)로 나타났다. 그러나, 지표면 온도가 0℃ 이상일 때 SSF가 동결 상태로 나타나는 오차가 관측되었으며, 이는 여름철 후방산란계수의 평균값과 겨울철 후방산란계수의 평균값을 통해 산정하는 SSF 산정 수식의 특성 때문으로 이 값의 조정을 통해 오차를 개선할 수 있음을 보였다.

• Proceedings of the Korean Fiber Society Conference
• /
• 1997.10a
• /
• pp.198-201
• /
• 1997

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.3
• /
• pp.31-39
• /
• 2021

In this study, the fiber blending ratio and strain rate effect on the tensile properties synergy effect of hybrid fiber reinforced cement composite was evaluated. Hooked steel fiber(HSF) and smooth steel fiber(SSF) were used for reinforcing fiber. The fiber blending ratio of HSF+SSF were 1.5+0.5, 1.0+1.0 and 0.5+1.5vol.%. As a results, in the cement composite(HSF2.0) reinforced with HSF, as the strain rate increases, the tensile stress sharply decreased after the peak stress because of the decrease in the number of straightened pull-out fibers by increase of micro cracks in the matrix around HSF. When 0.5 vol.% of SSF was mixed, the micro cracks was effectively controlled at the static rate, but it was not effective in controlling micro cracks and improving the pull-out resistance of HSF at the high rate. On the other hand, the specimen(HSF1.0SSF1.0) in which 1.0vol.% HSF and 1.0vol.% SSF were mixed, each fibers controls against micro and macro cracks, and SSF improves the pull-out resistance of HSF effectively. Thus, the fiber blending effect of the strain capacity and energy absorption capacity was significantly increased at the high rate, and it showed the highest dynamic increase factor of the tensile strength, strain capacity and peak toughness. On the other hand, the incorporation of 1.5 vol.% SSF increases the number of fibers in the matrix and improves the pull-out resistance of HSF, resulting in the highest fiber blending effect of tensile strength and softening toughness. But as a low volume fraction of HSF which controlling macro crack, it was not effective for synergy of strain capacity and peak toughness.

• KSBB Journal
• /
• v.14 no.1
• /
• pp.24-30
• /
• 1999

The fed-bach simultaneous saccharification and fermentation (SSF) of newspaper to ethanol with Brettanomyces custersii was studied. The initial substrate concentration for the effective fed-batch SSF was 8% (w/v). The initial optimum enzyme concentration was 30 FPU/g cellulose for cellulase and the optimum volumetric ratio of $\beta$-glucosidase to cellulase was 0.1. When 4% (w/v) of ball-milled newspaper was supplemented intermittently at time intervals, considering the mixing of newspaper slurry, the fed-batch SSF showed higher ethanol concentration (26.80 g/L) and two times higher ethanol production yield based on enzyme than the batch SSF.

• Korean Journal of Pharmacognosy
• /
• v.48 no.4
• /
• pp.268-272
• /
• 2017

Three tricyclic pyridone alkaloids, (-)-4,6'-anhydrooxysporidinone (1), (-)-6-deoxyoxysporidinoCne (2), and (-)-sambutoxin (3) were isolated from cultures of Fusarium lateritium SSF2 derived from the fruits of Cornus officinalis. Chemical structures of the isolated compounds were determined by spectroscopic method and comparisons with reported data values. The compounds 1-3 were isolated for the first time from this fungal strain.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.10a
• /
• pp.240-243
• /
• 2001

Recently, many automobile parts produced by semi-solid forming(SSF) process has been applied for improved weight reduction, better environmental protection and energy savings. SSF process was well developed for high volume production of light weight aluminum components. In this paper, knuckle has been manufactured with A357 by SSF and thor investigated for microstructures and mechanical properties followed by various heat-treatment conditions. It was found that the examined microstructure was equiaxed at the whole cross-section area and as a result, the mechanical properties were satisfied by 100MPa YS, 260MPa UTS and $14\%$ elongation.

• Journal of the Korean Society for Heat Treatment
• /
• v.16 no.1
• /
• pp.16-25
• /
• 2003

Recently, semi-solid forming (SSF) Process has been applied in many automobile parts for improved weight reduction, better environmental protection and energy savings. SSF process was well developed for high volume production of light weight aluminum components. In this paper, knuckle has been manufactured by SSF and then the microstructures and mechanical properties were investigated followed by various heat-treatment conditions. It was found that the examined microstructure was equiaxed at the whole cross-section area.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.1
• /
• pp.40-47
• /
• 2005

Modeling and simulation for simultaneous saccharification and fermentation (SSF) process in bioconversion of paper mill sludge to lactic acid was carried out. The SSF process combined the enzymatic hydrolysis of paper mill sludge into glucose and the fermentation of glucose into lactic acid in one reactor. A mathematical modeling for cellulose hydrolysis was developed, based on the proposed mechanism of cellulase adsorption deactivation. Another model for simple lactic acid fermentation was also made. A whole mathematical model for SSF was developed by combining the above two models for cellulose hydrolysis and lactic acid fermentation. The characteristics of the SSF process were investigated using the mathematical model.

• Korean Chemical Engineering Research
• /
• v.52 no.4
• /
• pp.430-435
• /
• 2014

Physical and chemical barriers, caused by the close association of the main components of cellulosic biomass, hinder the hydrolysis of cellulose to fermentable sugars. Since the main goal of pretreatment is to increase the enzyme accessibility improving digestibility of cellulose, development of an effective pretreatment process has been considered to be important. In this study, SAA (Soaking in Aqueous Ammonia) was chosen as pretreatment because this is the simple and low-cost method. Rice straw of which the production is outstandingly high in domestic agriculture residues in Korea was chosen as raw material. SSA pretreatment with various reaction time of 3 h to 72 h was tested. The enzymatic hydrolysis and SSF (Simultaneous Saccharification and Fermentation) were performed at three different temperature (30, 40 and $50^{\circ}C$) to investigate performance of SSF upon various pretreatment conditions. As a result, this SAA treated-rice straw was found to have great potential for effective enzymatic hydrolysis and SSF with lower enzyme dosage at lower temperature ($30^{\circ}C$) than its conventional SSF. In SAA addition, SAA reduced fermentation time to 24 h owing to increase the initial hydrolysis rate substantially.