• Journal of the Earthquake Engineering Society of Korea
• /
• v.2 no.4
• /
• pp.41-52
• /
• 1998

The Dongnae Fault in the southeastern part of the Korean Peninsular is not a single fault but a complex fault zone composed of numerous minor faults. In order to deduce the paleostress tensor evolving the Dongnae Fault, we measured 329 faults in outcrops around the fault zone and analyzed the geometries of them. Most of them are steeply dipping(>65˚) and fall into three groups striking N10E, N30E and N70E. More than one half of them show the rakes less than 30˚ Paleostress tensor analysis using the collected fault data has been conducted with the Angelier's direct inversion method and the Choi's method. As result, four different principal paleostress axes each of which subtends an independent tectonic event are found. They are; (1) NNE-SSW compression and ESE-WNW extension (Event I), (2) NNE-SSW extension (Event II), (3) ESE-WNW extension (Event III) and (4) ENE-WSW compression and NNW-SSE extension (Event IV) in chronology. Therefore, the tectonic movement around the Dongnae Fault was firstly governed by strike-slip faulting related to Event I. Afterward, normal faults were formed by Event II and Event III. Finally, the dextral strike-slip faults along the major trace of the Dongnae Fault were formed in NNE direction related to Event IV.

• Journal of the Korea Concrete Institute
• /
• v.15 no.1
• /
• pp.87-94
• /
• 2003

Construction plan and strength control have limitations in construction production field because it is difficult to predict the form removal strength and development of specified concrete strength. However, we can have reasonable construction plan and strength control if prediction of concrete strength is available. In this study, firstly, the newly proposed strength prediction model with maturity method was compared with the logistic model to test the adaptability. Secondly, the determination of time of form removal was verified through the new strength prediction model. As the results, it is found that investigation of the activation energy that are used to calculate equivalent age is necessary, and new strength prediction model was proved to be more accurate in the strength prediction than logistic model in the early age. Moreover, the use of new model was more reasonable because it has low SSE and high decisive factor. If we adopt new strength prediction model at construction field, we can expect the reduced period of work through the reduced time of form removal.

• Research in Community and Public Health Nursing
• /
• v.11 no.1
• /
• pp.90-104
• /
• 2000

This study was carried out to investigate the current state of occupational health management and characteristics of employees working in small-scale-enterprises (SSE) employing less than 50 workers. Samples were chosen among the two thousands employees working in 838 factories where located in Youngdungpo-Ku, Seoul, Korea. The study results were as followed: 1. Most factories investigated in the study were manufactures (68.6%) which were established in 5 to 10 years ago (29.2%), employing less than 5 workers (72.9%) and registered in accident compensation insurance (23.0%). 2. Health screening was undertaken in 24.9% workplaces for periodic health examination and in 1.5% for special health examination. Environmental monitoring was done in 3.3% factories. Very few factories displayed Material Substance Data Sheet (MSDS) in 3.1% among the total factories. 3. Workplaces usually had their own toilets in 75.9% and washing basin in 58.6% as types of sociowelfare facilities. 4. Employees responded in the study were mostly in the range of age from 30 to 39 in 34.7%. male in 84.8%. the married in 70.3%. manual workers in 42.0%. mostly working regularly 51 hours per a week in 48.2% and earned 710.000 Won to 1.000.000 Won per month in 35.0%. Medical utilization for employees were covered by factories sponsored medical insurance in 12.7% and by provincial sponsored medical insurance in 83.4%. 5. Two point six percents of employees were suffered by diseases. The health complaints indicated were mainly digestive problems in 46.7% and hypertension in 24.4%. 6. Employees wore personal protective equipments for work such as gloves in 48.1%. safety shoes in 30.5%. ear plug in 5.5% and mask in 6.9%. Based on the results of study, we recommend that various types of occupational health management should be developed according to workplace working condition of each factory. In addition to the development of occupational health strategies. we think that it is more important to monitor and to allocate how effectively they operate each other on the basis of longitudinal continuity. Besides, we would like to insist that these all management effort should be focused on prevention of disease and occupational health education of employees.

• The Journal of the Petrological Society of Korea
• /
• v.17 no.2
• /
• pp.95-107
• /
• 2008

The Carved Buddhist Triad on Rock-cliff in Sinarnri (Treasure No. 680) consists of biotite granodiorite, which were positively carved on fore and west planes of four subvertical cliffs by two joint sets of NE-SW and NNW-SSE directions. The cliffs are $N50^{\circ}E\;85^{\circ}SE$ in fore plane, $N25^{\circ}W\;90^{\circ}$ in west plane, $N40{\sim}50^{\circ}E\; 82{\sim}85^{\circ}NW$, back plane, $N20^{\circ}W\;75^{\circ}SW$ in east plane, which are parallel to two joint sets of NE-SW and NNW-SSE directions in geology around it. The chemical index of alteration ranges 60.3 to 62.0 from the major elements in the rock that was weathered into producing kaolin minerals from alteration of feldspars and biotite. The Buddhist image has been deteriorated into joints, brown rusts, discolorations and granular disintegrations by such deterioration causes as deformation, moisture, temperature variation and microorganic living. The moisture, which leaks from groundwater in the rock, dissolve to decompose minerals.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.540-548
• /
• 2018

The purpose of this study was to test the validity and reliability of the Satisfaction with Simulation Experience (SSE) scale for evaluating high-fidelity simulation education for nursing students. Participants were 174 nursing students, seniors enrolled in two colleges in two different regions. Collected data were analyzed using SPSS / WIN 22.0 and tested for construct validity (factor analysis, group comparison test) and reliability (internal consistency). Factor analysis revealed 17 items and 3 factors explaining 71.581% of the variance. Group comparisons showed that satisfaction with simulation training differed significantly across satisfaction to a college life and school record. Internal consistency reliability for all items was .945. For each sub-domain, the reliability coefficient was .929 for 'Debrief', .908 for 'Clinical learning and reflection', and .860 for 'Clinical reasoning'. Nursing students' mean satisfaction with simulation using the high-fidelity simulator was 3.92. Results of this study are expected to be used for evaluating the satisfaction of nursing college students receiving high-fidelity simulation education, and to serve as groundwork for the development and application of nursing simulation education.

• Journal of KIISE:Computing Practices and Letters
• /
• v.13 no.5
• /
• pp.252-259
• /
• 2007

With the rapid development of multimedia applications and wireless communication networks, consumer demand for video-over-wireless capability on mobile computing systems is growing rapidly. In this regard, this paper introduces YUV-aware instructions that enhance the performance and efficiency in the processing of color image and video. Traditional multimedia extensions (e.g., MMX, SSE, VIS, and AltiVec) depend solely on generic subword parallelism whereas the proposed YUV-aware instructions support parallel operations on two-packed 16-bit YUV (6-bit Y, 5-bits U, V) values in a 32-bit datapath architecture, providing greater concurrency and efficiency for color image and video processing. Moreover, the ability to reduce data format size reduces system cost. Experiment results on a representative dynamically scheduled embedded superscalar processor show that YUV-aware instructions achieve an average speedup of 3.9x over the baseline superscalar performance. This is in contrast to MMX (a representative Intel#s multimedia extension), which achieves a speedup of only 2.1x over the same baseline superscalar processor. In addition, YUV-aware instructions outperform MMX instructions in energy reduction (75.8% reduction with YUV-aware instructions, but only 54.8% reduction with MMX instructions over the baseline).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.107-114
• /
• 2020

This study was conducted to examine the effects of simulation-based education on the clinical reasoning competence, clinical competence, and satisfaction with simulation experience (SSE). The research design was one group pretest-posttest. Study participants were 89 third-year nursing students from C University in G city, who were engaged the simulation-based education for eight weeks from August to October 2019. Learning scenario titles were blood transfusion reaction patient care with postoperative total hip replacement, hypoglycemia patient care with diabetes mellitus, and hyperkalemia patient care with liver cirrhosis. The data were analyzed by paired t-test using SPSS Win 23.0 program. After applying simulation-based education, nursing students' clinical reasoning competence (t=-17.082, p<.001) and clinical competence(t=-18.40, p<.001) improved significantly. SSE score was 4.65 out of 5 points. The results indicate that the simulation-based education in this study gave the students the experience of providing qualified and secure nursing care under conditions similar to those in the real clinical field. To improve the clinical reasoning competence and clinical competence of nursing students, various cases scenarios are developed and simulation-based education should be applied to more subjects in the nursing curriculum.

• Journal of KIISE:Databases
• /
• v.30 no.3
• /
• pp.336-349
• /
• 2003

Histograms have been getting a lot of attention recently. Histograms are commonly utilized in commercial database systems to capture attribute value distributions for query optimization Recently, in the advent of researches on approximate query answering and stream data, the interests in histograms are widely being spread. The simplest approach assumes that the attributes in relational tables are independent by AVI(Attribute Value Independence) assumption. However, this assumption is not generally valid for real-life datasets. To alleviate the problem of approximation on multi-dimensional data with multiple one-dimensional histograms, several techniques such as wavelet, random sampling and multi-dimensional histograms are proposed. Among them, GENHIST is a multi-dimensional histogram that is designed to approximate the data distribution with real attributes. It uses overlapping buckets that allow more efficient approximation on the data distribution. In this paper, we propose a scheme, OPT that can determine the optimal frequencies of overlapped buckets that minimize the SSE(Sum Squared Error). A histogram with overlapping buckets is first generated by GENHIST and OPT can improve the histogram by calculating the optimal frequency for each bucket. Our experimental result confirms that our technique can improve the accuracy of histograms generated by GENHIST significantly.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.6
• /
• pp.134-142
• /
• 2012

This paper presents a study of system identification on the tilt response of the L-type retaining wall located at Tanhyun 11th ACE Apartment, Ilsan in order to understand mechanism how the structure behaves in operational conditions and to provide a reference tilt values for assessing structural abnormality. The retaining wall was extraordinarily tall (14m) in urban area so the long-term monitoring system had been installed with 3 tilts-meters and 9 temperature sensors operational from Oct 2004 upto Nov 2007. By using 5-months continuous data in which all the 12 channels were up and running, the two prediction models, 1) the linear model, and 2) the state-space equation (SSE) model, have been identified by finding the best fitness model among all possible 511 combinations of input temperatures out of the 9 temperatures. The linear model which was simple in the model structure achieved the validation fittness of 68% due to the fact that the static model wasn't able to represent thermal dynamics. The SSE model achieved the validation fitness of 90% which was quite accurate considering various unexpected noises happening in field measurements.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.5
• /
• pp.340-352
• /
• 2011

This study was carried out to analyze the change of wind filed and heat island according to the location of the high rise building using micrometeorology numerical model Envi-met3.0. In this study, the real urban planning of Jeonju city was used as input for the location and height of buildings. Modeling was performed for two conditions as input data. Case 1 is that wind direction is SSE and case 2 is W. To analyse the change of wind filed, wind speed results were used. To analyze the change of heat island, temperature results were used. Below the building height, wind speed increased 0.2~2.5 m/s at the inflow area and decreased 0.5~2.0 m/s at the area between the buildings. Above the building height, wind speed decreased 0.1~0.8 m/s near the building complex. On the other hand, wind speed increased 0.2~0.4 m/s in the outside area of the building complex. In the case of temperature, below the building height, temperatures increased $0.01{\sim}0.1^{\circ}C$ in the building complex and leeward area. On the other hand, temperature decreased $0.01{\sim}0.005^{\circ}C$ in the outside area of the building complex. Above the buildings height, temperatures decreased $0.05{\sim}0.2^{\circ}C$ in most of the area.