• Journal of Environmental Science International
• /
• v.21 no.6
• /
• pp.695-704
• /
• 2012

The application of disinfection models on the plasma process was investigated. Nine empirical models were used to find an optimum model. The variation of parameters in model according to the operating conditions (first voltage, second voltage, air flow rate, pH) were investigated in order to explain the disinfection model. In this experiment, the DBD (dielectric barrier discharge) plasma reactor was used to inactivate Ralstonia Solanacearum which cause wilt in tomato plantation. Optimum disinfection models were chosen among the nine models by the application of statistical SSE (sum of squared error), RMSE (root mean sum of squared error), $r^2$ values on the experimental data using the GInaFiT software in Microsoft Excel. The optimum model was shown as Weibull+talil model followed by Log-linear+ Shoulder+Tail model. Two models were applied to the experimental data according to the variation of the operating conditions. In Weibull+talil model, Log10($N_o$), Log10($N_{res}$), ${\delta}$ and p values were examined. And in Log-linear+Shoulder+Tail model, the Log10($N_o$), Log10($N_{res}$), $k_{max}$, Sl values were calculated and examined.

• Convergence Security Journal
• /
• v.6 no.3
• /
• pp.145-153
• /
• 2006

Infinite failure NHPP models for a record value satisfies mode proposed in the literature exhibit either monotonic increasing or monotonic decreasing failure occurrence rates per fault. In this paper, propose comparative study of software reliability model using Erlang distribution, Rayleigh and Gumbel distribution. Equations to estimate the parameters using maximum likelihood estimation of infinite failure NHPP model based on failure data collected in the form of interfailure times are developed. For the sake of proposing distribution, we used to the special pattern. Analysis of failure data set using arithmetic and Laplace trend tests, goodness-of-fit test, bias tests is presented.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.3
• /
• pp.42-48
• /
• 2014

The auxiliary-feed-water pump (AFWP) used to supply water during a station black out situation at nuclear power plants should meet the seismic qualification regulations stipulated in IEEE Std 323 and 344, so as to withstand earthquakes or dangerous situations. Here, we establish a model for the estimation of the structural integrity of this type of pump. If the natural frequency that results from a modal analysis is less than 33 Hz, we adopt a dynamic analysis, instead of a static analysis. A dynamic analysis was carried out taking into consideration seismic conditions such as the floor response spectra (FRS), an operation-base earthquake (OBE), and a safe-shutdown earthquake (SSE). Finally, an analytical estimation of the structural integrity of an AFWP is made through a comparison of calculated values and allowable values. If the result is less than the allowable stress, the pump is deemed to have good structural integrity. In addition, future studies will involve a stability check for rotor accidents that may occur during the operation of the pump.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.4
• /
• pp.45-51
• /
• 2020

In this study, a response spectrum analysis of an electric distributing board (EDB) was conducted to investigate seismic integrity in the design stage. For the seismic analysis, the required response spectra of a safe shutdown earthquake with 2% damping (RRS/SSE-2%) specified in GR-63-CORE Zone 4 was used as the ground spectral acceleration input. A finite element method modal analysis of the EDB was also performed to examine the occurrence of resonance within the frequency range of the earthquake response spectrum. Furthermore, static stress caused by deadweight was analyzed. The resultant total maximum stress of the EDB structure was calculated by adding the maximum stresses from both seismic and static loads using the square root of the sum of the squares (SRSS) method. Finally, the structural safety of the EDB was investigated by comparing the resultant total maximum stress with the allowable stress.

• Journal of the Korean Society of Safety
• /
• v.31 no.6
• /
• pp.129-134
• /
• 2016

Standard design of APR+(advanced power reactor plus) was certified at 2014 by Korea regulatory body. Based on the experience gained from OPR1000 and APR1400, the APR1400 was being developed as a 1,500MWe class reactor using Korean technologies for design code, reactor coolant pump, and man-machine interface system. APR+ has been basically designed to have the seismic design basis of safe shutdown earthquake (SSE) 0.3g, a 4-train safety concept based on N+2 design philosophy, and a passive auxiliary feedwater system (PAFS). Also, safety issues on the Fukushima-type accidents have been extensively reviewed and applied to enhance APR+ safety. APR+ provides higher reliability and safety against tsunami and earthquake. The purpose of this paper is to implement probabilistic safety assessment considering these design features and to analyze sensitivity of core damage frequency for large loss of coolant accident of APR+.

• Journal of Navigation and Port Research
• /
• v.34 no.9
• /
• pp.711-718
• /
• 2010

Redevelopment of the domestic small fishing ports is being started in earnest by applying the environmentally friendly technology in order to attract tourists. For the purpose of improving water quality in the harbor, selection of breakwater type might have the priority to secure calmness and stability. Therefore, this study is to determine the hydraulic characteristics of reflective ratio, installation efficiency and stability of the special type of blocks through the hydraulic model experiment. The results were introduced to analyze for the effect of infield construction work through numerical analysis. Gujora, a small fishing port in southern Korea, is affected by the waves of SSE, S, SSW direction and strong tidal currents. The results of applying cylindrical slit block show that stability of the blocks and harbor calmness were secured. Considering that the pass rate of a long period wave is still excellent, the primary objective of wave control and the secondary objective of improving water exchange are satisfied simultaneously.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.39-40
• /
• 2019

우리나라는 국제해사기구(IMO)에 "여객선 탈출지도체계의 기술개발에 관한 정보"라는 안건(IMO SSE4/INF2)을 2017년에 제출한 바 있다. 이 의제에 소개된 지능형 선박 및 인명대피 안내시스템(SEGA)은 한국해양과학기술원의 주관으로 한국해양수산부의 지원을 받아 2016년부터 2020년 3월까지 약 4년간의 프로젝트로 개발 중에 있다. SEGA는 데이터 수집과 분석, 정보 표시의 프로세스를 자동화하여 우리나라 연안에서 항해 중인 선박에 비상상황이 발생할 경우 항해자의 의사결정을 지원하는 시스템이다. SEGA 시스템을 지원하기 위해 구축된 SEGA 서버와 데이터베이스는 해양기상정보, 수심정보, 해상교통정보를 처리 한다. 또한 비상상황 시 2차 사고를 방지하기 위해 선박이 대피 할 수 있는 장소에 대한 정보를 사용자가 확인할 수 있도록 알고리즘이 설계되어 있다. 인명안전을 위해 SEGA는 비상상황 시 선박내부 구조정보와 화재 등 변수사항들을 고려하여 승객들에게 빠른 탈출을 위한 최적대피경로를 제공하며, 원격탐사기술을 이용하여 선박주변의 익수자를 탐지하도록 개발 중에 있다. 보다 상세한 내용은 항해항만학회 VTS 특별세션에서 발표할 예정이다.

• Journal of Construction Engineering and Project Management
• /
• v.3 no.4
• /
• pp.26-34
• /
• 2013

Customer satisfaction and customer relationship are crucial aspect in any enterprises including housing construction projects. In general, the housing developers are facing a number of new challenges in different countries including Libya. The construction industries/housing developers need to continuously improve their products and services to meet customers' satisfaction desires and to remain in the current competitive market. This paper focuses on analysing the satisfaction factors of customers including qualityaspects of products and services in the construction projects. A framework was developed to evaluate the dynamics relationship between customer satisfaction and quality products or services, aiming to help companies' managers and policy makers to understand the needs and points of view of their customers. Apragmatic analysis was conducted to explore and analyse the customer satisfaction factors in construction industry considering different aspect of customer groups in Libya. Results indicate that there is a high demand of improvements in the contractor's performance in terms of cost, time and quality of products. It was also found that Libyan construction companies have been forced to transform their policies after on Libyan war 2011 to focus on client and customer satisfactory policies, or say centric for the purpose of improving client requirements and turn the business into more advantageous for any company.

• Ocean Science Journal
• /
• v.42 no.2
• /
• pp.69-79
• /
• 2007

A vertical transect with 4 km length was established for the macrofaunal survey on the Chokchon macrotidal flat in Kyeonggi Bay, Incheon, Korea, 1994. Tidal elevation (m) and sediment mean grain size $(\phi)$ were inversely predicted by the transfer functions from the faunal assemblages. Three methods: weighted average using optimum value (WA), tolerance weighted version of the weighted average (WAT) and maximum likelihood calibration (MLC) were employed. Estimates of tidal elevation and mean grain size obtained by using the three different methods showed positively corresponding trends with the observations. The estimates of MLC were found to have the minimum value of sum of squares due to errors (SSE). When applied to the previous data $(1990\sim1992)$, each of three inference models exhibited high predictive power. This result implied there are visible relationships between species composition and faunas' critical environmental factors. Although a potential significance of the two major abiotic factors was re-affirmed, a weak tendency of biological interaction was detected from faunal distribution patterns across the flat. In comparison to the spatial and temporal patterns of the estimates, it was suggested that sediment characteristics were the primary factors regulating the distribution of macrofaunal assemblages, rather than tidal elevation, and the species composition may be sensitively determined by minute changes in substratum properties on a tidal flat.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.2109-2112
• /
• 2007

독도는 울릉도에서도 동남쪽으로 약 87.4km 떨어져 외해의 영향을 많이 받고 있는 지역이지만 방파제 등 외곽시설이 전무하여 평상파랑에도 접안이 어려운 경우가 많아서 독도 관광자원 활용도 및 편의시설 제공면에서 많은 어려움이 있다. 이에 본 연구에서는 독도 접안시설의 전면에 최근 국내에 본격적으로 도입되고 있는 부방파제(floating breakwater)를 설치할 경우 고정식 방파제 설치에 따른 문제점을 충분히 개선할 수 있다고 판단하여, 부방파제 설치에 따른 기술적인 타당성과 부두 이용률 개선효과 등을 연구 하였다. 독도의 접안시설은 해역이 동도와 서도에 의해 북쪽은 일부 차폐되고 남쪽은 직접 노출되어 있는 지리적 특성이 있어 주 파향인 남쪽계열의 8개 파향(SE, SSE, S, SW, SSW, WSW, W, WNW)의 평상파 제어가 가능하도록 방파제를 배치하였고, 이에 따른 부두 이용률 검토결과 부방파제를 설치할 경우 남쪽계열 파랑에 대하여 현상태에 비하여 부두 이용률이 대략 2배정도 증가되는 것으로 나타났으며, 부방파제 계류시스템의 안정에 대해서도 부체에 영향을 주는 외력에 대하여 계류체인의 길이와 Anchor Block 자중의 규모를 적당히 조정하면 충분히 안정한 것으로 검토되었다.