• 제목/요약/키워드: SSC-K

검색결과 299건 처리시간 0.03초

Fluoroscopy-guided intra-articular steroid injection for sternoclavicular joint arthritis secondary to limited cutaneous systemic sclerosis: a case report

  • Sencan, Savas;Guler, Emel;Cuce, Isa;Erol, Kemal
    • The Korean Journal of Pain
    • /
    • 제30권1호
    • /
    • pp.59-61
    • /
    • 2017
  • We report a case of fluoroscopy-guided intraarticular steroid injection for sternoclavicular joint (SCJ) arthritis caused by limited cutaneous systemic sclerosis (SSc). A 50-year-old woman diagnosed with limited cutaneous SSc presented with swelling and pain in the right SCJ. MRI revealed signs of inflammation consistent with right-sided sternoclavicular joint arthritis. After the failure of oral medications, we performed fluoroscopy-guided injection in this region. She reported complete resolution of her symptoms at 4 and 12-week follow-ups. This outcome suggests that a fluoroscopy-guided SCJ injection might be a safe and successful treatment option for sternoclavicular joint arthritis.

절개된 GaAs(110) 면의 XPD 분석 (XPD Analysis on the Cleaved GaAs(110) Surface)

  • 이덕형;정재관;오세정
    • 한국진공학회지
    • /
    • 제2권2호
    • /
    • pp.171-180
    • /
    • 1993
  • X-선 광전자 분광법(XPD)을 이용하여 GaAs(110) 절개면의 결정구조를 이해하였다. 각분해 X-선 분광법으로 GaAs(110) 면의 내각준위 Ga 및 As 3d의 스펙트럼을 얻어, 이 내각 준위의 세기 비율(intensity ratio)의 방위각과 편각에 따른 변화를 SSC(Single Scattering Cluster) 모델에서 얻은 회절패턴으로 곡선분석(fitting)하여 절개면의 재구성 구조(reconstruction geometry)를 얻었다. 이 절개면의 재구성된 값은 다른 실험의 결과와 비슷하였다.

  • PDF

Floating Thrombus in the Ascending Aorta of the Patient with Systemic Sclerosis - A case report -

  • Lee, Sub;Cho, Jun-Woo;Kwon, Oh-Choon
    • Journal of Chest Surgery
    • /
    • 제44권1호
    • /
    • pp.72-75
    • /
    • 2011
  • Aortic thrombi are important because it can cause the central and peripheral embolizations. Aortic thrombi can occur anywhere in the aorta but extremely rare in ascending aorta without atherosclerosis, aneurysm, cardiosurgical or traumatic state. Systemic sclerosis (SSc) is an autoimmune disorder of connective tissue and it can involve multisystem. Enhanced coagulation pathways, decreased fibrinolysis, and endothelial dysfunction probably contribute to vascular events in SSc. We report a case of a highly mobile thrombus in the ascending aorta, presented as an acute embolic stroke in the patient with systemic sclerosis. Surgical removal was performed to prevent recurrent embolic events.

INHERENT SAFETY ANALYSIS OF THE KALIMER UNDER A LOFA WITH A REDUCED PRIMARY PUMP HALVING TIME

  • Chang, W.P.;Kwon, Y.M.;Jeong, H.Y.;Suk, S.D.;Lee, Y.B.
    • Nuclear Engineering and Technology
    • /
    • 제43권1호
    • /
    • pp.63-74
    • /
    • 2011
  • The 600 MWe, pool-type, sodium-cooled, metallic fuel loaded KALIMER-600 (Korea Advanced LiquId MEtal Reactor, 600 MWe) has been conceptually designed with an emphasis on safety by self-regulating (inherent/intrinsic) negative reactivity feedback in the core. Its inherent safety under the ATWS (Anticipated Transient Without Scram) events was demonstrated in an earlier study. Initiating events of an HCDA (Hypothetical Core Disruptive Accident), however, also need to be analyzed for assessment of the margins in the current design. In this study, a hypothetical triple-fault accident, ULOF (Unprotected Loss Of Flow) with a reduced pump halving time, is investigated as an initiator of a core disruptive accident. A ULOF with insufficient primary pump inertia may cause core sodium boiling due to a power-to-flow mismatch. If the positive sodium reactivity resulting from this boiling is not compensated for by other intrinsic negative reactivity feedbacks, the resulting core power burst would challenge the fuel integrity. The present study focuses on determination of the limit of the pump inertia for assuring inherent reactivity feedback and behavior of the core after sodium boiling as well. Transient analyses are performed with the safety analysis code SSC-K, which now incorporates a new sodium boiling model. The results show that a halving time of more than 6.0 s does not allow sodium boiling even with very conservative assumptions. Boiling takes place for a halving time of 1.8 s, and its behavior can be predicted reasonably by the SSC-K.

Genome-wide association study identifies 22 new loci for body dimension and body weight traits in a White Duroc×Erhualian F2 intercross population

  • Ji, Jiuxiu;Zhou, Lisheng;Guo, Yuanmei;Huang, Lusheng;Ma, Junwu
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제30권8호
    • /
    • pp.1066-1073
    • /
    • 2017
  • Objective: Growth-related traits are important economic traits in the swine industry. However, the genetic mechanism of growth-related traits is little known. The aim of this study was to screen the candidate genes and molecular markers associated with body dimension and body weight traits in pigs. Methods: A genome-wide association study (GWAS) on body dimension and body weight traits was performed in a White $Duroc{\times}Erhualian$ $F_2$ intercross by the illumina PorcineSNP60K Beadchip. A mixed linear model was used to assess the association between single nucleotide polymorphisms (SNPs) and the phenotypes. Results: In total, 611 and 79 SNPs were identified significantly associated with body dimension traits and body weight respectively. All SNPs but 62 were located into 23 genomic regions (quantitative trait loci, QTLs) on 14 autosomal and X chromosomes in Sus scrofa Build 10.2 assembly. Out of the 23 QTLs with the suggestive significance level ($5{\times}10^{-4}$), three QTLs exceeded the genome-wide significance threshold ($1.15{\times}10^{-6}$). Except the one on Sus scrofa chromosome (SSC) 7 which was reported previously all the QTLs are novel. In addition, we identified 5 promising candidate genes, including cell division cycle 7 for abdominal circumference, pleiomorphic adenoma gene 1 and neuropeptides B/W receptor 1 for both body weight and cannon bone circumference on SSC4, phosphoenolpyruvate carboxykinase 1, and bone morphogenetic protein 7 for hip circumference on SSC17. Conclusion: The results have not only demonstrated a number of potential genes/loci associated with the growth-related traits in pigs, but also laid a foundation for studying the genes' role and further identifying causative variants underlying these loci.

QTL Analysis of Teat Number Traits in an F2 Intercross between Landrace And Korean Native Pigs

  • Park, Hee-Bok;Han, Sang-Hyun;Yoo, Chae-Kyoung;Lee, Jae-Bong;Cho, Sang-Rae;Cho, In-Cheol
    • 한국수정란이식학회지
    • /
    • 제31권4호
    • /
    • pp.313-318
    • /
    • 2016
  • The aim of this study was to identify quantitative trait loci (QTLs) influencing teat number traits in an $F_2$ intercross between Landrace and Korean native pigs (KNP). Three teat number traits (left;right;and total) were measured in 1105 $F_2$ progeny. All experimental animals were genotyped with 173 informative microsatellite markers located throughout the pig genome. We detect that seven chromosomes harbored QTLs for teat number traits: genome regions on SSC1;3;7;8;10;11;and 13. Six of fourteen identified QTL reached genome-wide significance. In SSC7;we identified a major QTL affecting total teat number that accounted for 5.6 % of the phenotypic variance;which was the highest test statistic (F-ratio = 61.1 under the additive model;nominal $P=1.3{\times}10^{-14}$) observed in this study. In this region;QTL for left and right teat number were also detected with genome-wide significance. With exception of the QTL in SSC10;the allele from KNP in all 6 identified QTLs was associated with decreased phenotypic values. In conclusion;our study identified both previously reported and novel QTL affecting teat number traits. These results can play an important role in determining the genetic structure underlying the variation of teat number in pigs.

직조 형태의 지능형 연성 복합재료를 이용한 쉘 구동기의 제작 (Fabrication of Shell Actuator using Woven Type Smart Soft Composite)

  • 한민우;송성혁;추원식;이경태;이재원;안성훈
    • 한국정밀공학회지
    • /
    • 제30권1호
    • /
    • pp.39-46
    • /
    • 2013
  • Smart material such as SMA (Shape Memory Alloy) has been studied in various ways because it can perform continuous, flexible, and complex actuation in simple structure. Smart soft composite (SSC) was developed to achieve large deformation of smart material. In this paper, a shell actuator using woven type SSC was developed to enhance stiffness of the structure while keeping its deformation capacity. The fabricated actuator consisted of a flexible polymer and woven structure which contains SMA wires and glass fibers. The actuator showed various actuation motions by controlling a pattern of applied electricity because the SMA wires are embedded in the structure as fibers. To verify the actuation ability, we measured its maximum end-edge bending angle, twisting angle, and actuating force, which were $103^{\circ}$, $10^{\circ}$, and 0.15 N, respectively.

Methylation Status of H19 Gene in Embryos Produced by Nuclear Transfer of Spermatogonial Stem Cells in Pig

  • Lee, Hyun-Seung;Lee, Sung-Ho;Gupta, Mukesh Kumar;Uhm, Sang-Jun;Lee, Hoon-Taek
    • Reproductive and Developmental Biology
    • /
    • 제35권1호
    • /
    • pp.67-75
    • /
    • 2011
  • The faulty regulation of imprinting gene lead to the abnormal development of reconstructed embryo after nuclear transfer. However, the correlation between the imprinting status of donor cell and preimplantation stage of embryo development is not yet clear. In this study, to determine this correlation, we used the porcine spermatogonial stem cell (pSSC) and fetal fibroblast (pFF) as donor cells. As the results, the isolated cells with laminin matrix selection strongly expressed the GFR ${\alpha}$-1 and PLZF genes of SSCs specific markers. The pSSCs were maintained to 12 passages and positive for the pluripotent marker including OCT4, SSEA1 and NANOG. The methylation analysis of H19 DMR of pSSCs revealed that the zinc finger protein binding sites CTCF3 of H19 DMRs displayed an androgenic imprinting pattern (92.7%). Also, to investigate the reprogramming potential of pSSCs as donor cell, we compared the development rate and methylation status of H19 gene between the reconstructed embryos from pFF and pSSC. This result showed no significant differences of the development rate between the pFFs ($11.2{\pm}0.8%$) and SSCs ($13.3{\pm}1.1%$). However, interestingly, while the CTCF3 methylation status of pFF-NT blastocyst was decreased (36.3%), and the CTCF3 methylation status of pSSC-NT blastocyst was maintained. Therefore, this result suggested that the genomic imprinting status of pSSCs is more effective than that of normal somatic cells for the normal development because the maintenance of imprinting pattern is very important in early embryo stage.

Effect of 1-MCP and Temperature on the Quality of Red-fleshed Kiwifruit (Actinidia chinensis)

  • Kwanhong, Prangthong;Lim, Byung-Seon;Lee, Jin-Su;Park, Hee-Ju;Choi, Mi-Hee
    • 원예과학기술지
    • /
    • 제35권2호
    • /
    • pp.199-209
    • /
    • 2017
  • This study detailed the effects of 1-methylcyclopropene (1-MCP) on ripening and fruit quality in red-fleshed kiwifruit (Actinidia chinensis) stored at 0 or $10^{\circ}C$ for 20 days, and $20^{\circ}C$ for 13 days. The quality of the fruit was assessed by measuring ethylene production, respiration rate, weight loss, firmness, flesh color, soluble solids content (SSC), and titratable acidity (TA), along with a sensory evaluation. Compared to untreated kiwifruit, fruit treated with $1{\mu}L{\cdot}L^{-1}$ 1-MCP for 24h at $20^{\circ}C$ prior to storage showed a delay in ripening and maintained fruit quality during storage. Ethylene production and respiration rate were affected by 1-MCP treatment only in fruit stored at $20^{\circ}C$, where the values were markedly higher compared to kiwifruit stored at 0 and $10^{\circ}C$. 1-MCP treatment resulted in a clear reduction in weight loss due to a delay in fruit ripening. The firmness of kiwifruit stored at 10 and $20^{\circ}C$ decreased significantly compared to fruit stored at $0^{\circ}C$, but 1-MCP treatment led to a reduction in this loss. Upon storage, SSC increased while TA decreased across all treatments. Sensory evaluation scores increased with decreasing firmness and acidity and increasing SSC. The shelf life of kiwifruit stored at $0^{\circ}C$ was extended without any chilling injury or color changes. In summary, the results show that 1-MCP treatment can potentially maintain quality and delay ripening of red-fleshed kiwifruit stored at all storage temperatures.

Flow cytometry As a Tool for Monitoring Immune Parameters of the Manila clam Ruditapes philippinarum

  • Park, Kyung-Il;Philippe Soudant;Park, Kwang-Sik
    • 한국어업기술학회:학술대회논문집
    • /
    • 한국어업기술학회 2003년도 춘계 수산관련학회 공동학술대회발표요지집
    • /
    • pp.369-369
    • /
    • 2003
  • Hemocytes in marine bivalves play important immunological roles in discrimination, opsonization and phagocytosis of foreign materials as a defense mechanism. In this study we report the flow cytometric implications to investigate the immune parameters such as the compositional and the functional characteristics of hemocytes isolated from the Manila clams, Ruditapes philippinarum. Heterogeneity of the hemocytic cell population was determined by the forward scatter (FSC) and side scatter (SSC) cytometric profile which showed three populations: granulocytes, hyalinocytes and small agranular cells. In addition, phagocytosis rate was measured after adding fluorescent-labeled particles. The data were initially analysed for two-parameters: FSC and SSC, then the fluorescent (FL 1) frequency distribution histogram of the hemocyte population was subsequently obtained.

  • PDF