• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.4
• /
• pp.307-312
• /
• 2006

This paper proposes the SRM drive system, which accurately estimates the phase currents from the DC-link current to drive SRM instead of detecting the three-phase currents. In addition, the detecting circuit of DC-link current is also proposed to increase the resolution and decrease the off-set influence. Comparing with the general drive system based on the phase current, it is verified through the experiments that the proposed SRM drive system based on the DC-link current has the good performance in steady-state response of the speed control. Using the DC-link current, all of the 3-phase currents can be easily estimated for driving the SRM.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.5
• /
• pp.115-121
• /
• 2014

The intrinsic simplicity, ruggedness, and simple power electronic drive requirement of a Switched Reluctance Motor(SRM) make it possible to use in many commercial adjustable speed application. The simple magnetic circuit results in a high efficiency drive and low temperature rise, and the drive system provides a good drive characteristics. This paper is provides two phase 4/3 SRM that is similar to two phase 6/3 SRM as aspect to magnetic structure. Although 6/3 SRM does not experience any flux reversal as the flux is in the same direction whether phase A or B is excited, but two phase 4/3 SRM experiences a flux reversal in small part of stator yoke. The flux reversal in two phase 4/3 SRM could be relieved by an adjustment of stator yoke structure. The magnetic analysis and design considerations of the two phase 4/3 SRM have been obtained by the finite element method analysis (FEM).

• Journal of the KSME
• /
• v.17 no.1
• /
• pp.8-17
• /
• 1977

이 글에서는 1.표준기준물의 정의와 용도 2. SRM의 제조와 검정 3. SRM의 미래요구 4. SRM에 관한 국제협력 등에 관하여 알아보았다.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.565-568
• /
• 2005

This paper presents dynamic characteristics of super high speed SRM and it's drive. The nonlinear model of super high speed SRM is implement by Matlab/simulink and the simulation results show that the prototypeSRM can operate up 20,000[rpm]with stable performance.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1044-1046
• /
• 1993

This paper describes a switching strategy for variable speed control and low torque ripple of Switched Reluctance Motor(SRM). The main advantage of this strategy is simple control. Therefore it can be constructed easily. And a design principle of SRM is represented for the proposed switching strategy. The proposed switching method is tested by simulation and experiment on various SRM type. As a result, The SRM drive with the proposed scheme is effective in reducing the torque ripple and variable speed control.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.924-926
• /
• 2005

This paper presents an excellence start-up performance drive system of Switched Reluctance Motor(SRM) for hoist. At first, the SRM design method of Hoist drive is expounded, and suitable Digital control arithmetic of SRM Hoist drive is advanced in the paper. Finally, some correlative experimentation has been finished, and the SRM Hoist drive has been confirmed in the experimentation.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.693-696
• /
• 2011

The SRM (Switched Reluctance Motor) is composed of silicon steel plates where the rotor structure is simple and laminated without coil winding or permanent magnet, making it mechanically robust and its maintenance and repair excellent. Applying SRM as traction motor for railway vehicle is given consideration because of its ruggedness capability in severe loading condition and its compact structure. Optimal design of SRM is needed to reduce torque ripple to apply SRM for railway traction drive because SRM has high torque ripple. In this paper, switched reluctance motor with three different stator pole shapes is taken for magnetic analysis using 3d finite element method to apply SRM as traction drive for railway vehicle. It is observed that the model 3 added Tooth Tang Depth and Slot Round to stator shape gives the improved inductance and torque characteristic.

• Journal of Korean Library and Information Science Society
• /
• v.46 no.4
• /
• pp.641-654
• /
• 2015

The researcher conducts the survey through questioner method and analyzed the data in detail about E-resources available at SRM University library. The objectives of the study are to find out the awareness of use and purposes and their level of satisfaction of users. Further the researcher identifies the barrier and the ways and means of improvement of the use of E-resources. A total of 1,205 respondent was participating in this survey.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.17
• /
• pp.7141-7148
• /
• 2014

Background: Oral squamous cell carcinoma (OSCC) is an important malignancy throughout the world; early detection is an important criterion for achieving high cure rate. Out of the many reported markers for OSCC, this study validated the efficacy of tumor necrosis factor-${\alpha}$ (TNF-${\alpha}$) in differentially diagnosing premalignant oral lesions and OSCC. Also, the study aimed to correlate the levels of salivary and serum TNF-${\alpha}$ with clinicopathologic factors. Materials and Methods: A prospective experimental laboratory study was designed. Serum and salivary samples from 100 subjects in each group of healthy control, premalignant disease (PMD) and OSCC were collected for the study following appropriate exclusion and inclusion criteria. Serum and salivary level of TNF-${\alpha}$ was analysed by enzyme linked immunosorbent assay. The data obtained were subjected to appropriate statistical analysis. Results: Increased level of both serum and salivary TNF-${\alpha}$ was observed in OSCC subjects compared to healthy control and PMD group. Receiver operator characteristic curve analysis and area under curve values showed high specificity and sensitivity for salivary TNF-${\alpha}$ in differentiating OSCC from PMD and healthy controls. There was significant increase in TNF-${\alpha}$ level in moderately and poorly differentiated lesion compared to well differentiated lesion and in stage IV of clinical stage. A positive correlation was observed only with histological grading of OSCC and TNF-${\alpha}$. Conclusions: Salivary TNF-${\alpha}$ is proved to be superior for detecting OSCC. Increase in TNF-${\alpha}$ with histological grading and clinical staging suggests a role in prognosis.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.1
• /
• pp.25-29
• /
• 2004

This paper is to research about design and drive system of a switched reluctance motor for a pallet truck application. SRM is suitable for a pulse type source and is researched for home and industrial applications owing to the advance of power electronics technology. An SRM for a pallet truck drive is developed and tested. The drive system has to operate with low voltage and high current. The small size, robustness and high efficiency make it possible to replace with DC motor which is used in a pallet truck conventionally. Test results show that pallet truck with SRM has better drive characteristics than that of the DC motor performance.