• 대한임상약리학회:학술대회논문집
• /
• 2003.12a
• /
• pp.19-19
• /
• 2003

• International Journal of Industrial Entomology and Biomaterials
• /
• v.25 no.2
• /
• pp.147-151
• /
• 2012

Fifteen races resulted from silkworm breeding program at Sericulture Research Department (SRD) were used for hybridization. Fourteen hybrids were obtained and coded as; Giza C, D, R, S, T, U, A, V, W, P, H, L and Qanater 1, 2. The traits of cocoon weight, cocoon shell weight, pupal weight, cocoon shell ratio, silk productivity, fifth instar duration, total larval duration, number of cocoon per liter and pupation ratio were evaluated. Data were analyzed by using three formulae of heterosis over better, mid and check parent values. Hybrids of Giza V, C, N, Qanater 1 and 2 are promising and could be used in commercial cocoon production. Generally, there are some new hybrids can be exploited in commercial scale. Also, the local races can be evolved using the hybridization, inbreeding and selection program.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.242-247
• /
• 2009

In this paper, we investigate interference between short-range radiocommunication devices (SRDs) with frequency hopping spread spectrum (FHSS) and direct sequence spread spectrum (DSSS) methods when they are in the same frequency bands. In order to analyze interference from unwanted emission of SRD with DSSS to that of FHSS, Monte-Carlo (MC) simulation method is employed and interference probabilities are calculated. We simulate interference scenarios in accordance with several duty cycles and bandwidths. It is also assumed that the propagation model is free space The effect of distance between interfering transmitter and victim receiver is analyzed and bit error rate (BER) is simulated. From the interference analysis results, it is shown that duty cycle affects compatibility more than bandwidth does. Also, we can make sure of the separation distance which satisfies BER criterion when there are only one interfering transmitter and multiple interfering transmitters.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.197-200
• /
• 2001

본 논문에서는 병렬귀환 유전체 발진기를 P-HEMT 게이트단의 바이어스 진압을 제어시켜 안정된 위상동기신호가 나타나도록 P-HEMT 게이트 바이어스 튜닝에 의한 Ku-band 고안정 위상동기 마이크로파 발진기를 설계하였다. 위상동기방식은 외부에서 제공되는 125MHz의 기준주파수를 SRD로 체배시켜 하모닉 신호를 이용한 마이크로파 샘플링 위상검파 방식으로 설계하였으며, 고안정 특성과 저위상잡음을 나타내는 위상동기 마이크로파 발진기(phase locked microwave oscillator)를 바랙터 다이오드를 사용하지 않고 P-HEMT의 게이트단을 동조시키는 방식으로 위상동기 발진기를 설계하고 게이트 바이어스에 따른 위상잡음 관계를 분석하였다

• Journal of Korea Multimedia Society
• /
• v.21 no.7
• /
• pp.795-801
• /
• 2018

In these days, various technologies to provide a service of high quality of 360 VR media contents is being studied and developed. However, rendering high-quality of media images is very difficult with the limited resources of HMD (Head Mount Display). In this paper, we designed and implemented a 360 VR Player for high quality 360 tiled video image render to HMD. Furthermore, we developed multi-resolution-based Foveated Rendering technology. By conducting several experiments, We have confirmed that it improved the performance of video rendering far more than existing tiled video rendering technology.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.4
• /
• pp.513-519
• /
• 1990

In order to realize an efficient and stable X-band harmonic generator, a 100 MHz frequency multiplier, an impulse generator using SRD(Step Recovery Diode) module, and a narrow-band bandpass waveguide filter have been designed and tested. By properly combining these devices an X-band harmonic generator has been realized. The output power of the harmonic generator was measured to be -1.5 dBm at 9 GHz which is the 90th harmonic of the 100MHz input. The power fluctuation of the harmonic generator due to temperature variation was observed to the about 0.15 dB during 24 hours of 4\ulcorner temperature variation.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.672-674
• /
• 2000

The paper presents design procedure and characteristics of Switched Reluctance Motor(SRM). SRM is capable of application to various field because of its constructional advantages. In design procedures, pole shoe will be considered. First step, overall design will be accomplished using PC-SRD. Then, inductance and torque characteristics is inspected with motor geometries by FEA.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.721-724
• /
• 2005

미국, 유럽에서는 315MHz, 433.92MHz를 아마추어 무선국과 공유하여 차량용 주파수로 활용하고 있다. 참고로, 미국 고속도로 안전위원회는 TPMS(Tire Pressure Monitoring System)를 2003${\sim}$2006년 까지 미국 내 생산 차량 및 수입차량에 대해 TPMS 센서 장착을 100% 의무 적용하고 있다. 433.92MHz는 국내에서 이미 아마추어 무선 업무용 주파수로 할당되어 사용되고 있으며, 현재 TPMS 수입차량의 국내 도입을 위한 주파수 분배 및 기술 기준이 마련되어 있지 않은 상황이다. 향후 해외 수입차량의 국내 도입 및 국내 차량의 해외 수출을 고려할 경우 국제 기준에 부합하면서 국내 전파환경에 적합한 주파수 분배 및 기술 기준의 마련이 필요하다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2019.06a
• /
• pp.302-304
• /
• 2019

최근 영상처리 기술의 발달로 기존의 콘텐츠 대비 더욱 생생한 현장감을 주는 초고해상도 콘텐츠에 대한 관심이 증가하고 있다. 이에 맞춰, 초고해상도 콘텐츠의 라이브 스트리밍 서비스에 대한 요구사항 역시 꾸준히 증가 하고 있다. 라이브 스트리밍 서비스를 위한 다수의 HyperText Transfer Protocol (HHTP) 기반 적응형 스트리밍 서비스가 있으나, Dynamic adaptive streaming over HTTP (DASH)가 가장 대중적으로 사용되고 있다. 본 논문에서는 DASH기반 Spatial Relationship Description (SRD) 방법을 사용하여 원본 영상과 초고해상도 콘텐츠를 시그널링(signalling) 하고, 이를 통해 네트워크 상황에 맞는 영상을 재생할 수 있는 서비스 플랫폼을 설계하고, 이를 위한 MPD 기술방법을 제안 및 검증한다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.5
• /
• pp.724-729
• /
• 2008

This paper presents the calculation of the required bandwidth of common frequency bandwidth applying queueing theory for maximizing the efficiency of frequency resource of WPAN(Wireless Personal Area Network) based Digital acoustic and communication devices. It assumed that LBT device(ZigBee) and FH devices (DCP, RFID and Bluetooth) coexist in the common frequency band for WPAN based Digital acoustic and communication devices. Frequency hopping (FH) and listen before talk (LBT) have been used for interference avoidance in the short range device (SRD). The LBT system transmits data after searching for usable frequency bandwidth in the radio wave environment. However, the FH system transmits data without searching for usable frequency bandwidth. The queuing theory is employed to model the FH and LBT system, respectively. As a result, the throughput for each channel was analyzed by processing the usage frequency and the interval of service time for each channel statistically. When common frequency bandwidth is shared with SRD using 250mW, it was known that about 35 channels were required at the condition of throughput 84%, which was determined with the input condition of Gaussian distribution implying safety communication. Therefore, the common frequency bandwidth is estimated with multiplying the number of channel by the bandwidth per channel. These methodology will be useful for the efficient usage of frequency bandwidth.