• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 추계종합학술대회 B
• /
• pp.894-897
• /
• 2008

본 논문에서는 버스트 홈 네트워크 채널에서 패킷 데이터 전송을 위한 SR-ARQ (Selective Repeat-Automatic Repeat Request) 기법의 처리율 성능을 분석한다. 홈 네트워크 전송에서는 데이터 전송에 의한 에러를 극복하기 위하여 강력한 에러 제어 기술이 필요하다. 기본적으로 ARQ와 FEC기법이 주로 사용되며 ARQ 기법은 신뢰성 있는 데이터 전송에서 주로 사용된다. 버스트 채널에서 SR-ARQ를 사용한 패킷 데이터 전송의 성능을 분석하고 처리율 분석을 위한 간단한 방식을 제시한다. 분석을 통하여 적은 크기의 패킷 데이터 전송은 버스트 홈 네트워크 채널에서 우수한 성능을 얻을 수 있었다.

• 한국세라믹학회지
• /
• 제42권6호
• /
• pp.391-398
• /
• 2005

It is known that $BaMgAl_{10}O_{17}:Eu^{2+}(BAM)$ phosphors currently used have a serious thermal degradation problem. We screened $SrO-B_2O_3-P_2O_5$ system by a solution combinatorial chemistry technique in an attempt to search for a thermally stable blue phosphor for PDPs. A Quantitative Structure Activity Relationship (QSAR) was also obtained using an artificial neural network trained by the result fiom the combinatorial screening. As a result, we proposed a promising composition range in the $SrO-B_2O_3-P_2O_5$ ternary library. These compositions crystallized into a single major phase, $Sr_6BP_5O_{20}:Eu^{2+}$. The structure of $Sr_6BP_5O_{20}:Eu^{2+}$ was clearly determined by ab initio calculation. The luminescent efficiency of $Sr_6BP_5O_{20}:Eu^{2+}$ was 2.8 times of BAM at Vacuum Ultra Violet (VUV) excitation. The thermal stability was also good but the CIE color chromaticity was slightly poor.

• 공업화학
• /
• 제17권4호
• /
• pp.420-425
• /
• 2006

Propylene oxide (PPO)를 gelation agent로 한 졸-겔법으로 입자가 균일하고 자기적 특성이 우수한 $MO{\cdot}Fe_{12}O_{18}$ (M/Ba and Sr)의 구조식을 가지는 M-type hexagonal ferrite를 제조하였다. 본 방법으로 얻은 졸-겔용액은 매우 안정적인 분산상태를 보이며, $Fe^{3+}$의 겔화가 진행되고, 생성된 $Fe_2O_3$의 표면에서 $Ba^{2+}$ 또는 $Sr^{2+}$의 겔화가 진행되는 것으로 설명될 수 있어서, +3가 이하의 금속이라도 +3가 이상의 금속 존재 하에는 겔화가 가능한 것을 확인하였다. 또한, 기존 방법과 비교하여 값싼 원료를 사용하며, 반응 시간도 1 min 이내로 짧아지는 장점이 있다. 본 제조법으로 얻어진 분말은 기왕에 발표된 문헌 값과 비교하면 $150^{\circ}C$ 이상 낮은 열처리 온도에서 최고의 자기적 특성을 나타냈으며, 향상된 자기적 특성을 보였다. Sr-ferrite의 경우 최대포화자화 값 74.4 emu/g, 보자력 값 6198 Oe을, Ba-ferrite의 경우도 최대포화자화 값 68.1 emu/g, 보자력 값 5155 Oe을 보였다. 이들은 기존에 발표된 문헌 값과 비교하면 각각 10%와 5% 이상 증가된 보자력 값을 나타내어, 고밀도 자기기록재료에 적합함을 확인하였다. 제조된 분말은 1차 건조 분말의 경우 3~5 nm의 입자들이 응집된 50 nm 정도의 구형입자가 생성되고, 열처리 후에는 500 nm 정도의 고른 크기를 가진 육각판상형 입자가 생성된다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2000년도 창립총회 및 춘계학술발표회
• /
• pp.133-136
• /
• 2000

Soil decontamination process was conducted to study adsorption and modeling characteristic of Sr$^{2+}$ ion using citric acid and water system with TRIGA soil. When the concentration of citric acid was increased, the BTC of Sr$^{2+}$ ion was to be closed to the BTC of $^3$$H_2O$ at experiments of soil adsorption. Beside, when the concentration of citric acid was under 0.01M Sr$^{2+}$ ion, BTLs was asymmetry. It was characteristic of nonequilibrium adsorption. R and $K_{p}$ , were decreased to be increased the concentration of citric acid. Asymmetry modeling was nearly the same to be compare with symmetry modeling in decontamination process, when the concentration of citric acid was decreased. Result of experiment was agree with asymmetry and symmetry model, when the concentration of citric acid was increased.eased.

• 한국진공학회지
• /
• 제4권S1호
• /
• pp.138-144
• /
• 1995

It is commonly believed that high permittivity materials will be necessary for future high density Gbit DRAMs. In a first part, we explain the choice of SrTiO3 by ECR MOCVD for Gbit-scale DRAMs. In a second part, after describing the ECR MOCVD system and presenting the requirements SrTiO3 thin films should meet for use in Gbit-scale DRAMs, the physical and electrical properties of srTiO3 thi film prepared by ECR MOCVD are then studied. A stacked capacitor technology, suitable for use in 1 Gbit DRAM, and comprising high permittivity SrTiO3 thin films prepared by ECR MOCVD at $450^{\circ}C$ on electron beam and RIE patterned RuO2/TiN storage nodes is finally described.

• 전기학회논문지
• /
• 제56권10호
• /
• pp.1751-1756
• /
• 2007

This paper presents a high performance pressure control scheme for SR(Switched Reluctance) type hydraulic oil pump using DITC(Direct Instantaneous Torque Control). SR drive has a good feature for pump applications due to a high efficiency, high speed and high torque characteristics. But, SR drive has high torque ripple in commutation region. So, the pump pressure variation is high in the region. In order to reduce the pressure variation, DITC combined with pressure control scheme is presented in this paper. A simple PI controller with flow and pressure limit, generates a reference torque to keep the constant actual pump pressure. The direct torque controller of SR drive generates inverter switching signals according to a control rule and a torque estimator. Computer simulation and experiemtal results show the validation of the proposed control scheme.

• 한국결정성장학회지
• /
• 제13권4호
• /
• pp.172-175
• /
• 2003

We have investigated effects of the lattice mismatch between the LPE films and the substrates. We have grown $La_{2-x}Sr_{x}CuO_{4}$(x=0.1 to 0.15) single crystalline films on single crystalline substrates having different lattice parameter ratio c/a e.g., $La_{2-x}Sr_{x}Cu_{1-y}Zn_{y}O_{4},\;La_{2-x}Ba_{x}CuO_{4},\; LaSrAlO_{4}\;and\;La_{2-x}Sr_{x}Cu_{1-y}Al_{y}O_{4}$ etc., using the IR-LPE technique. The superconducting properties of the grown films were found to vary significantly depending on the lattice mismatch with different substrates.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.217-220
• /
• 1999

We investigated the effects of doping elements on the Bi-Sr-Ca-Cu-0 ceramics. The doping elements can be classified into groups depending on their supeconducting characteristics in the Bi -Sr-Ca-Cu -O structure. The first group of doping elements(Co, Fe, Ni and Zn) substitute into the copper site and can reduce the critical temperatures of the 2223 and 2212 phases. The second group of doping elements(Y and La) substitute into the Ca site and cause the disappearance of the 2223 phase and increase the critical temperatures in the 2212 phase.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.171.2-171.2
• /
• 2016

The 2-dimensiona electron gas (2DEG) layers have opened tremendous interests in the heterooxide interfaces formed between two insulating materials, especially between LaAlO3 and $SrTiO_3$. The 2DEG layers exhibit extremely high mobility and carrier concentrations along with metallic transport phenomena unlike the constituent oxide materials, i.e., $LaAlO_3$ and $SrTiO_3$. The current work inserted artificially the interfacial layer, $Sr_xCa_{1-x}TiO_3$ between $LaAlO_3$ and $SrTiO_3$, with the aim to controlling the 2-dimensional transports. The insertion of the additional materials affect significantly their corresponding electrical transports. Such features have been probed using DC and AC-based characterizations. In particular, impedance spectroscopy was employed as an AC-based characterization tool. Frequency-dependent impedance spectroscopy have been widely applied to a number of electroceramic materials, such as varistors, MLCCs, solid electrolytes, etc. Impedance spectroscopy provides powerful information on the materials system: i) the simultaneous measurement of conductivity and dielectric constants, ii) systematic identification of electrical origins among bulk-, grain boundary-, and electrode-based responses, and iii) the numerical estimation on the uniformity of the electrical origins. Impedance spectroscopy was applied to the $LaAlO_3/Sr_xCa_{1-x}TiO_3/SrTiO_3$ system, in order to understand the 2-dimensional transports in terms of the interfacial design concepts. The 2-dimensional conduction behavior system is analyzed with special emphasis on the underlying mechanisms. Such approach is discussed towards rational optimization of the 2-dimensional nanoelectronic devices.

• 대한전자공학회논문지SD
• /
• 제37권1호
• /
• pp.36-43
• /
• 2000

청색 발광 SrS:CuCl TFEL 소자의 휘도를 향상시키기 위하여 황 압력과 열처리 조건을 최적화하여 SrS:CuCl TFEL 소자를 제작하였다. 전자빔 증착 장비를 이용하여 SrS:CuCl 형광체를 6000 ~ 8000 ${\AA}$ 두께로 증착 시킨 후, 800 $^{\circ}C$에서 3분 동안 열처리하여 TFEL 소자를 제작시켰다. 형광체 결정은 열처리 온도 및 열처리 지속 시간의 증가에 따라 향상되었다. SrS:CuCl TFEL 소자는 468 nm 와 500 nm에서 발광 피크 파장을 나타내었고, CIE 색 좌표는 x = 0.21, y = 0.33로 청색 빛이 방출되었다. SrS:CuCl TFEL 소자의 휘도$(L_{40})$는 형광체 증착 중의 황 압력에 크게 의존하여 황 압력을 $8{\times}10^{-6}$ torr에서 $2{\tiems}10^{-5}$ torr로 증가시켰을 때 262 cd/$m^2$에서 728 cd/$m^2$로 증가되었다.