• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.5
• /
• pp.655-661
• /
• 1995

This study was conducted to get basic information of dry matter production and agronomic characteristics for increasing grain ripening in rice cultivar with large grains. Three cultivars which have different grain size were used. Of the two large grain cultivars, SR7796-3-1-5-1-l(SR7796F$_{7}$) had long culm and SR11269-13-3-4-2(SR11269F$_{6}$) had short culm. On the other hand, Tamjinbyeo was recommended cultivar had medium size of grain and culm. LAI was highest in Tamjinbyeo, followed by the SR11269F$_{6}$ and SR7796F$_{7}$, LAI decrement was higher in large grain cultivars than that of Tamjinbyeo after 20days after heading. Total dry weight(TDW) of areal part was highest in SR11269F$_{6}$, followed by the Tamjinbyeo and SR7796F$_{7}$. Dry weight (DW) of stem (leaf sheath+culm) at harvesting stage was decreased 15%, 12% in Tamjinbyeo, SR11269F$_{6}$, respectively, but was increased 5% in SR7796F$_{7}$ compared to heading stage. In distribution rate of each organ to TDW, distribution rate of leaf blade was low in large grain cultivar, but that of stem in Tamjinbyeo, SR7796F$_{7}$ and SR11269F$_{6}$ was 36%, 38% and 42%, respectively. In canopy architecture leaf blade weight was the highest 30~40cm, 40~50cm and 70~8Ocm above the ground in SR11269F$_{6}$, Tamjinbyeo and SR7796F$_{7}$, respectively. Range of panicle distribution in the canopy was 40cm in Tamjinbyeo, and was 70cm in large-grain cultivars. The results suggest that it has to take a growing interest in developing culture method for increasing LAI during growth stage, especially, around heading, in keeping green leaf till ripening stage and also in growing unformly plant within rice hill in large grain cultivars.cultivars.ltivars.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.10
• /
• pp.971-975
• /
• 2006

[ $SrTiO_3:Al,Pr$ ] red phosphors doped with Y and Er were synthesized by solid state reaction method. The luminescence properties of $SrTiO_3:Al,Pr$ phosphors before and after doping were examined by photoluminescence. Efforts were paid to elucidate the cause of the increase of green luminescence in $(Sr_{0.95}Y_{0.05})TiO_3:Pr,Er\;and\;(Sr_{0.95}Y_{0.05})TiO_3:Pr,Al$ phosphors. The enhanced green luminescence was interpreted by the energy transfer between $Er^{3+}\;and\;Pr^{3+}$ ions, and the change of bandgap in the $(Sr_{0.95}Y_{0.05})TiO_3:Pr$ phosphors.

• Journal of the Korean Ceramic Society
• /
• v.36 no.10
• /
• pp.1075-1079
• /
• 1999

LaSrCoO3 thin films were spin-coated onto the SrTiO3(100) substrates by the chemical solution process. X-ray diffraction $\theta$-2$\theta$ scans and X-ray diffraction $\beta$ scans were used to determine the crystallinity and in -plane alignment behavior of the films. The X-ray diffraction pattern showed the film obtained by annealing at 80$0^{\circ}C$ was highly oriented. The X-ray diffraction pole-figure analysis and reciprocal-space mapping (2$\theta$-$\Delta$$\omega$ scans) of the resulting film showed that the film comprising the pseduocubic phase had an epitaxial relationship with the SriO3 substrate.

• Journal of the Korean Ceramic Society
• /
• v.28 no.6
• /
• pp.471-477
• /
• 1991

Effects of ZnO, PbO and SiO2 on the grain growth and magnetic properties of Sr-ferrite were investigated. (1) Addition of ZnO to Sr-ferrite increased remanence, but decreased coercivity and maximum energy product. (2) Addition of PbO up to 0.5 wt% increased (B$.$H)max of Sr-ferrite, but addition more than 0.5 wt% decreased (B$.$H)mzx (3) SiO2 addition to the 0.5 wt% PbO doped Sr-ferrite decreased remanence and increased coercivity. The coercivity increase in due to the grain refinement effect of SiO2. But addition of SiO2 more than 0.5 wt% invoked a decrease of coercivity and (B$.$H)max of Sr-ferrite due to abnormal grain growth. Sr-ferrite magnet having maximum energy product of 3.7MGOe was fabricated by using the roasting product of Pyrrhotite.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.11a
• /
• pp.131-132
• /
• 2009

시멘트 고화체 중의 Sr-90 분석을 위한 시료 전처리 방법을 실험을 통하여 확립하였다. 시멘트 고화체 중의 Sr-90 과 같은 베타방출 핵종을 분석하기 위해서는 고화체 시료를 건조, 분쇄, 산처리, Sr-90 분리 및 LSC 를 이용한 Sr-90의 방사능 측정을 해야 한다. 이를 위하여 인수 고화체 시료를 전 처리 하기 전, SRM 1887a portland cement 를 사용하여 여러 산 처리 방법을 통하여 각 원소들의 회수율을 알아보았다. SRM 시료를 통하여 얻은 조건을 참조하여 실제 고화체 시료 5g 씩 3회의 7개 시료들을 전 처리하여 ICP-AES 를 통하여 각 원소들의 회수율을 비교하였다. 또한, 전처리 후 Sr 분리에 Sr-resin (Eichrom)를 이용하기 위해서는 Sr-resin 사용 시 많은 영향을 주는 칼슘의 량을 미리 알아야 한다, 이를 위하여 시멘트 고화체 중 50% 가까이 함유되어 있는 칼슘 량을 반 정량적으로 알아내기 위한 방법을 확립하였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.9
• /
• pp.846-850
• /
• 2005

[ $SrTiO_3$ ]:Al, Pr red phosphors for FED were synthesized by solid state reaction method. The dependence of their luminescent properties on Sr and Al concentration was investigated. The $SrTiO_3$: Al, Pr phosphors showed the characteristic X-ray diffraction patterns of the perovskite structure. Photoluminescence intensity and lattice constant in $SrTiO_3$: Al, Pr phosphors changed in quite a similar manner with Sr concentration. Photoluminescence intensity increased with increasing lattice constant, and the decrease of photoluminescence intensity and lattice constant occurred in the vicinity of 1 mol Sr concentration.

• Korean Journal of Materials Research
• /
• v.17 no.3
• /
• pp.137-141
• /
• 2007

A series of $Ca_{1-x}Sr_{x}S:Mn$ phosphors were synthesized by solid-state reactions. The emission peaks of $Ca_{1-x}Sr_{x}S:Mn$ is blue shifted front 605 to 570 nm with increasing Sr content. Since $Ca_{1-x}Sr_{x}S:Mn$. Mn phosphors exhibit strong absorption in region of 254 nm, the emission wavelength of a fluorescent lamp, these phosphors can be used as wavelength tunable emitting phosphors from reddish orange to yellow. We investigated the optical and structural properties of $Ca_{1-x}Sr_{x}S:Mn$ phosphors.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11B
• /
• pp.989-997
• /
• 2008

The reverse acknowledgment (RA) scheme supports a fast loss recovery for negative acknowledgment (NAK)-based selective repeat automatic repeat request (SR-ARQ) by detecting a retransmission failure quickly before a retransmission timer expires. In this paper, we evaluate the performance of a NAK-based SR-ARQ protocol with the RA scheme and compare it with the conventional NAK-based SR-ARQ protocol. Particularly, we propose a simple analysis model for the transport delay of the NAK-based SR-ARQ protocol considering the traffic condition, the retransmission persistence, the timer-based retransmissions and the RA scheme's behavior. Both NAK-based SR-ARQ protocols with and without the RA scheme are implemented by using the OPNET simulator. We verified the analysis model's accuracy through the simulation results. Also, we evaluate the performance of the NAK-based SR-ARQ protocol with the RA scheme based on analysis and simulation results.

• Journal of the Mineralogical Society of Korea
• /
• v.7 no.2
• /
• pp.91-96
• /
• 1994

중.저준위 방사성 폐기물의 대표적인 핵종인 137Cs, 90Sr에 대한 캐올리나이트의 흡착특성을 수용액의 이온강도와 pH의 영양하에서 알아보았다. 흡착실험은 회분식으로 하였고, 사용한 수용액은 NaCl, CaCl2, MgSO4, KCL 각각을 10-1, 10-2, 10-3, 10-4 mole/$\ell$로 하였다. 수용액광물 평형상태의 pH를 4.5, 7.0, 10.5로 조절하였다. 실험결과 캐올리나이트의 Cs, Sr 흡착은 이온강도와 pH에 상당한 영향을 받으며, Sr 흡차에 양이온들의 경쟁은 Ca2+ Mg2+>K+>Na+ 순을 보이고, Cs의 경우에는 K+>Ca2+ Mg2+>Na+의 순을 보인다. 이는 수용액상에서 이온들의 수호에너지와 관련되며, 광물입자와 이온들의 물구조변환특성에 의해 설명된다. Cs과 Sr 사이에 흡착우선성은 산성 내지 약알카리에서는 Cs이 Sr보다 흡착이 잘 되나, 강알칼리성 환경에서는 Sr이 Cs보다 흡착이 잘 되는 pH 의존성을 보였다. 수용액의 pH가 증가함에 따라 핵종의 흡착량이 증가하는데, 이는 캐올리나이트의 흡착자리인 실라놀과 알루미놀에 의한 제타전위가 pH에 의존함과 잘 일치한다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.177-180
• /
• 2009

Here is presented the measurement on SrO- and SrCaO-PDP operated at lower voltage. SrO- and SrCaO-PDP attain high luminous efficacy at low voltage, where the breakdown voltage is 30 % lower than that of the ordinary MgO-PDP. A one-dimensional fluid model is applied for the simulation of PDP discharge. High VUV radiation efficiency is confirmed at high ${\gamma}_i$ and both low and high $V_s$ as in the experiment. Discharge analysis in simulation also shows that the high ${\gamma}_i$ protective layer leads to high plasma density especially near the cathode electrode, being responsible for high efficiency.