• International Journal of Naval Architecture and Ocean Engineering
• /
• v.2 no.4
• /
• pp.200-210
• /
• 2010

In this paper, different evaluation methods of Hot Spot Stresses (HSS) have been applied to four different welded structure details in order to compare them and to illustrate their differences. The HSSs at failure-critical locations were calculated by means of a series of finite element analyses. There was good overall agreement between calculated and experimentally determined HSS on the critical locations. While different methods and procedures exist for the computation of the structural hot-spot stress at welded joints, the recommendations within the International Institute of Welding (IIW) guideline concerning the 'Hot Spot Stress' approach were found to give good reference stress approximations for fatigue-loaded welded joints. This paper recommends and suggests an appropriate finite element modeling and hot spot stress evaluation technique based on round-robin stress analyses and experimental results of several welded structure details.

• Research in Plant Disease
• /
• v.21 no.4
• /
• pp.330-333
• /
• 2015

In June 2013, we collected leaf spot disease samples of Datura metel from Gangneung, Gangwon Province, Korea. The symptoms observed were small circular to oval dark brown spots with irregular in shape or remained circular with concentric rings. We isolated the pathogen from infected leaves and cultured the fungus on potato dextrose agar. We examined the fungus morphologically and confirmed its pathogenicity according to Koch's postulates. The results of morphological examinations, pathogenicity tests, and the rDNA sequences of the internal transcribed spacer regions (ITS1 and ITS4), glycerol-3-phosphate dehydrogenase (G3PDH) and the RNA polymerase II second largest subunit (RPB2) gene sequence revealed that the causal agent was Alternaria tenuissima. To the best of our knowledge, this is the first report of leaf spot of D. metel caused by A. tenuissima in Korea as well as worldwide.

• The Plant Pathology Journal
• /
• v.26 no.4
• /
• pp.421-423
• /
• 2010

New sources of barley (Hordeum vulgare L.) resistant to spot blotch, caused by Cochliobolus sativus, are needed to provide effective resistance because of the rapid change pathotype patterns of C. sativus in fields. The purposes of our study were to develop a method to screen barley for resistance to spot blotch disease and then use this methodology to screen barley genotypes for resistance to the major virulent pathotype Pt4 in barley populations in Syria. A transparent tape method, in which a conidial suspension of C. sativus was dropped onto transparent tape and placed, treated-side down, on the second leaf surface of barley plants. Disease symptoms of fungus were easily detected on the leaves covered by the transparent tape after 48h of inoculation. The transparent tape method was repeatable and the disease scores obtained were correlated (r = 0.91, P = 0.001) with those obtained by the seedling assay. This method may be beneficial in various plant pathology breeding programs.

• Journal of Acupuncture Research
• /
• v.21 no.4
• /
• pp.149-157
• /
• 2004

Objective : The purpose of this study is to research whether Inyeong Chon spot pulse(人迎氣口脈) could be used on application of Ohaeng-acupuncture(五行鍼法). Methods : I research ${\ll}$Naegyeong${\gg}$(內經) and annotations were excerpted and record that notied the Inyeong Chon spot pulse(人迎氣口脈). Results : Comparison of Inyeong Chon spot pulse and Deficiency Excess syndrome of meridian system is useful to use Zheng Ge(正格) and Sheng Ge(勝格) of Ohaeng-acupuncture(五行鍼法) but in application of Han Ge(寒格) and Re Ge(熱格), Inyeong Chon spot pulse(人迎氣口脈) is not useful.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.61-66
• /
• 2000

The fatigue crack initiation life is studied on automotive spot weldment made from cold rolled carbon steel(SPC) sheet by using DCPDM and local strain approach. It can be found that the fatigue crack initiation behavior in spot weldment can be definitely detected by DCPDM system. The local stresses and strains are estimated by elastic-plastic FEM analysis and the alternative approximate method based on Neuber's rule were applied to predict the fatigue life of spot weldment. A satisfactory correlation between the predicted life and experimental life can be found in spot weldment within a factor of 4.

• Journal of Welding and Joining
• /
• v.19 no.4
• /
• pp.379-383
• /
• 2001

Resistance spot welding has been widely used in the sheet metal joining processes because of low cost, high productivity and convenience. Recently, automobile and aerospace industries are trying to replace partly steel sheets with aluminum alloy sheets. But in the case of dissimilar materials, to apply resistance spot welding has been known to be very difficult owing to the effect of melting temperature. On this study, an effort was made to apply spot welding of dissimilar sheet metals, 2024 aluminum alloy and zinc coated steel sheet, evaluate the spot weld quality with tensile-shear strength test and nondestructive evaluation technique, C-scan image methodology. In this study results, as the current below 11 kA, melting of materials is not achieved well. Also as the current exceeds to 13.5 kA, the more spatters happen at welded zone and tensile-shear strength lowered. So, the feasibility of C-scan image technique proposed in the study is found to be suitable evaluation method for resistance spot weldability.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.286-288
• /
• 2003

In this paper, we present our implementation of the direct camera model (image to ground) for SPOT5 and use it to assess the geometric accuracy of SPOT5 imagery. Our assessment confirms the location accuracy of SPOT5 imagery (without use of GCPs) is less than 50m. We further introduce a few attitude parameters to refine the camera model with GCPs. The model is applied to two SPOT5 supermode images, one near vertical, incidence angle of 3 degrees, and one far oblique, incidence angle of 27 degrees. The results show that accuracy (rms of check points) of about one pixel (2.5m) can be achieved with about 4 GCPs by using only 3 parameters to correct the yaw, pitch and roll of the satellite.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.4
• /
• pp.143-148
• /
• 2011

This study analyzes the resistance spot weldability of DP60 steels. To analyze the resistance spot weldability of DP60 steels, tensile strength test and macro-section test were conducted for the resistance spot welds. Acceptable welding conditions were determined as a function of the resistance spot welding process parameters such as electrode force, welding time, and welding current. The lower limit of the welding lobe was the minimum shear tension strength for 590MPa-grade steel while the upper limit was determined whether or not expulsion was detected.

• Publications of The Korean Astronomical Society
• /
• v.10 no.1
• /
• pp.57-66
• /
• 1995

We analyze 271 data of the daily sunspot observations during the period of January 1 to December 31 in 1994 and present the daily relative sunspot numbers. During the 1994, the preliminary annual average of the relative sunspot numbers is found to be 32.9 based on 12.4 distinct spots in a single group for 2.2 spot groups. According to the appearance of 146 spot groups, our analysis shows that the mean life time of spot group is about 4 day and 19.2 hours.

• Publications of The Korean Astronomical Society
• /
• v.13 no.1 s.14
• /
• pp.55-64
• /
• 1998

We have analyzed 255 data of the daily sunspot observations during the period of January 3 to December 31 in 1997 and present the daily relative sunspot numbers. During the 1997, the preliminary annual average of the relative sunspot numbers found to be 28.2 based on 9.7 distinct spots in a single group for 1.4 spot groups. According to the appearance of 366 spot groups, our analysis shows that the mean life time of spot group is about 4 day and 17.0 hours.