• Korean Journal of Remote Sensing
• /
• v.24 no.5
• /
• pp.453-462
• /
• 2008

The objective of this paper is to compare the prediction performances of different landslide hazard maps based on topographic data stemming from different sources of elevation. The geostatistical framework of kriging, which can properly integrate spatial data with different accuracy, is applied for generating more reliable elevation estimates from both sparse elevation spot heights and exhaustive ASTER-based elevation values. A case study from Boeun, Korea illustrates that the integration of elevation and slope maps derived from different data yielded different prediction performances for landslide hazard mapping. The landslide hazard map constructed by using the elevation and the associated slope maps based on geostatistical integration of spot heights and ASTER-based elevation resulted in the best prediction performance. Landslide hazard mapping using elevation and slope maps derived from the interpolation of only sparse spot heights showed the worst prediction performance.

• Korean Journal of Remote Sensing
• /
• v.19 no.5
• /
• pp.403-409
• /
• 2003

Since SPOT4 satellite contained VEGETATION 1 sensor launched, the noise in VEGETATION data was occasionally arisen a difficulty for the data traitement. Blind line noise types were studied in VEGETATION-l short wave infrared channel(SWIR). In order to provide a precis product, the procedure for removing this noise is strongly recommended. In the case that the blind values are clearly distinguished from contamination-free values a simple threshold method was applied, while a changeable threshold method was used for the blind value mixed with contamination-free values. New algorithm presented in this study is consists of two method for each type of SWIR blind. After removing blind line, there were again some residual pixels of blind, because the threshold is not determinated sufficiently low. Lower threshold could remove the blind line as well as the contamination-free pixels. Nevertheless, the results showed a good qualitative improvement as compared with other algorithm.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.5
• /
• pp.87-95
• /
• 2004

From the results of AE(Acoustic Emission) source location occurred by the spot exciting as suggested in this research, it has been confirmed that AE technique is quite fruitful in figuring out the location of the occurrence, form, size and direction of the defects. As the results of examining the distribution of event for the angle of crack $\alpha$ to Xs and Ys, as the increases from $0^{\circ}$ ~ $90^{\circ}$, gradually changes its width from the axis Xs to the axis Ys. So event appears approximately similar in its size at the angle of crack $\alpha$=$45^{\circ}$, yet opposite when $\alpha$ is lager. It is believed that this is a phenomenon where its crack legnth $\alpha$, assumed as a planar defect, is to be prcjected toward the direction with a larger size. Thus, it is expected that the application of the experimental method suggested in this study would make it possible to identify the location of the defect in the material in the nondestructive way.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5B
• /
• pp.498-507
• /
• 2004

The fast and Precise service for the users request is the most important in the World Wide Web. However, the lest service is difficult due to the rapid increase of the Internet users recently. The Shared Web Caching (SWC) is one of the methods solving this problem. The performance of SWC is highly depend on the hit rate and the hit rate is effected by the memory size, processing speed of the server, load balancing and so on. The conventional load balancing is usually based on the state history of system, but the prediction of the state of the system can be used for the load balancing that will further improve the hit rate. In this study, a Hot Spot Prediction Method (HSPM) has been suggested to improve the throughputs of the proxy. The predicted hot spots, which is the item most frequently requested, should be predicted beforehand. The result show that the suggested method is better than the consistent hashing in the point of the load balancing and the hit rate.

• Journal of Navigation and Port Research
• /
• v.26 no.1
• /
• pp.43-49
• /
• 2002

In this Paper, the mechanical behavior of two reかangular plates spot-welded under free vibration is investigated in detail. The focus of the analysis is to evaluate the effect of thickness of reinforced plates with equivalent thickness. The results of this the investigation are compared with detailed finite element analysis end experiments of the plates spot-welded for various parameters, such as aspect ratio, arm ratio, and distance ratio of spot-welding Points. The conclusion obtained are as followed. 1. The effect thickness due to spot-weld is very large, such as 55% in comparison with area ratio of spot-welding joint is just 4.52%. 2 The effect of thickness with respect to the distance ratio is maximized when the distance ratio is 0.4.

• Korean Journal of Geomatics
• /
• v.1 no.1
• /
• pp.1-5
• /
• 2001

This paper presents an investigation into the operational comparison of SPOT triangulation to build GCP library by analytical plotter and DPW (digital photogrammetric workstation). GCP database derived from current SPOT images can be used to other image sensors of satellite, if any reasons, such as lack of topographic maps or GCPs. But, general formulation of a photogrammetric process for GCP measurement has to take care of the scene interpretation problem. There are two classical methods depending on whether an analytical plotter or DPW is being used. Regardless of the method used, the measurement of GCPs is the weakest point in the automation of photogrammetric orientation procedures. To make an operational comparison, five models of SPOT panchromatic images (level 1A) and negative films (level 1AP) were used. Ten images and film products were used for the five GRS areas. Photogrammetric measurements were carried out in a manual mode on P2 analytical plotter and LH Systems DPW770. We presented an approach for exterior orientation of SPOT images, which was based on the use of approximately eighty national geodetic control points as GCPs which located on the summit of the mountain. Using sixteen well-spaced geodetic control points per model, all segments consistently showed RMS error just below the pixel at the check points in analytical instrument. In the case of DPW, half of the ground controls could not found or distinguished exactly when we displayed the image on the computer monitor. Experiment results showed that the RMS errors with DPW test was fluctuated case by case. And the magnitudes of the errors were reached more than three pixels due to the lack of image interpretation capability. It showed that the geodetic control points is not suitable as the ground control points in DPW for modeling the SPOT image.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.5
• /
• pp.551-555
• /
• 2010

In protein 2-DE image analysis, the accuracy of spot-matching operation which identifies the spot of the same protein in each 2-DE gel image is intensively influenced by the errors caused by the various experimental conditions. This paper proposes an efficient method to find more accurate spot-matching patterns based on multiple reference gel images in spot-matching pattern analysis in protein 2-DE image analysis. Additionally, in order to improve the reduce the execution time which is increased exponentially along with the increasing number of gel images, a "partition then extension" framework is used to find spot-matching pattern of long length and of higher accuracy. In the experiments on real 2-DE images of human liver tissue are used to confirm the accuracy and the efficiency of the proposed algorithm.

• Childhood Kidney Diseases
• /
• v.4 no.1
• /
• pp.1-5
• /
• 2000

Purpose: The plcr of spot urine has been uised to predict the timed urine protein excretion. Although this method reduces errors caused by variations in urine volume, it is relatively thconvenient and expensive. Recently, a more rapid and less expensive screening method with specific gravity(SG) has been reported, and we have examined whether estimated-creatinine(Cr-est) with urine 5G could be used in place of urine creatinine to predict 24-hour collected urine protein excretion in children. Methods: We had retrospectively analyzed protein, creatinine and urine SG in randomized spot urine samples of 147 patients from March 1998 till June 1998 in Korea university Guro hospital and compared the urinary protein creatinine ratio(P/Cr) with the protein estimated-creatinine ratio(P/Cr-est). We compared the correlation of urinary creatinine vs-urine 5G with the timed urine pretein excretion. Results: 1) urine SG accurately estimated urine creatinine concentration (r=0.407, P<0.001, Cr=SG x 4485.82-4482.87). 2) P/Cr correlated with urine protein excretion measured in a 24-hour urine collection (r=0.771, P<0.001, 24-hour collected urine protein : 0.338 x (P/Cr) 4+667.885). 3) P/Cr-est correlated with a 24-hour collected urine protein (r=0.723, P<0.001, 24-hour collected urine protein =0.354 x (P/Cr-est)+726.044), Conclusions: These results suggest that P/Cr-est with urine SG could be useful method for screening proteinuria in children.

• Journal of Digital Convergence
• /
• v.12 no.10
• /
• pp.345-351
• /
• 2014

The purpose of this study is to offer more accurate information in whole spine examination of 3 spot DR through the comparative study about image distortion as making the flat phantom and measuring horizontal, vertical ratio and cobb angle of the virtual. We produced $H(40cm){\times}V(116cm){\times}D(2.3cm)$ flat acrylic phantom with lattice type of lead plate. We took projection respectively 3 times, total 9 times in each equipments using manufactured phantom as changing OFD to 6, 12, 18 cm. We measured a horizontal and vertical length of lead lattice and calculated the ratio. As appointing arbitrary points in the phantom and we measured cobb angle. The results of horizontal, vertical ratio measured CR type 0.98~1.01, scan DR type 0.96~0.97 and 3 spot DR 0.99~1.01. Cobb angle measured $52.5{\sim}53.3^{\circ}$, $52.1{\sim}54.3^{\circ}$ and $52.8{\sim}53.2^{\circ}$. Finally we can say that 3 spot DR method is an accurate method without any distortion in whole spine radiography.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.1
• /
• pp.49-58
• /
• 2010

This study is attempted to establish the concept of Byeulseo Scenic Spot that the definitions of Byeulseo and Scenic Spot would be presented first followed by clarifying the basis, reason and justification that Byeulseo would be called as Byeulseo Scenic Spot that the following is the major results formulated herein. First, the concept of scenic spot under the Cultural Property Act is the reference to the famous site with the building improvement well known for its great scenery or the point where splendid scenery is viewed that has the artistic value along with the trace of human lives in this cultural heritage that, although the scenery is important but the attention has to be on discovery of historic resources with the story telling in the subject site. Second, the criteria of designation on the Scenic Spot in Korea would be natural scenery, animal and plant site with well-known scenery, view point of scenery, famous building or garden and important places with legend that there lacks diversification. In this aspect, the intent of the concept of Scenic Spot would be facilitated to expand the designation of the Byeulseo Scenic Spot as the Scenic Spot of living style. Third, from the foreign cases, particularly, in Japan, it is needed to note that Byeulseos and housing gardens are designated for 196 places of Scenic Spot, reaching 55.4% of entire Scenic Spots. Laws, regulations, systems and designated criteria on the cases of designating the foreign Scenic Spots would be studied and quoted. Fourth, the classification work for each type to designate as cultural heritage has to be continued as the Scenic Spot of subject site with even more emerged for the value as the Scenic Spot in garden, original site and the like classified as historic site, important folk data and the like. Fifth, the designation of Scenic Spot of Byeulseo garden with splendid scenery as the living Scenic Spot has to be expanded. The pavilion existed now nationwide would be approximately 1,500, and these pavilions are the place where the scholars stay in the famous site, and this is the central space of Byeulseo to study, and if there is clear one that has written and record of deed to create the stories to people with the value for publicity campaign, it would be the subject of Scenic Spot. And sixth, for the case of view point with splendid scenery in Byeulseo Garden, it cannot be the subject of designation that the designation of Scenic Spot has to be expanded. In the event of the Byeulseo garden in Korea, there are many cases of having outstanding view points, and there is a few case of designating the subject site with great view point as a Scenic Spot.