• Proceedings of the KSR Conference
• /
• 2002.10a
• /
• pp.193-201
• /
• 2002

The development of railway vehicle and bogie involves the proper selection of design parameters not only to achieve high speed but also to reduce the vibration of the train. In this study an analytical model of a high speed freight car is developed to find the critical speed. The high speed freight car can generate the snake motion of the lateral and yawing motion of the car body, the bogie, and the wheelset. Numerical analysis for the nonlinear equation motions with 17 degrees of freedom showed the running stability and critical speed due to the snake motion. Also, the vibration modes of tile high speed freight car was calculated using ADAMS RAIL, which showed that the critical speed have the yawing modes of the car body and the bogie. Finally, this paper shows that the snake motion of the vehicle can be controlled with the modifications of the design parameters.

• KDI Journal of Economic Policy
• /
• v.38 no.1
• /
• pp.23-52
• /
• 2016

This paper examines the impact of introducing high-speed trains on consumer welfare, taking the ensuing changes in train schedules into account. Based on the estimated demand model for travel which incorporates consumer's heterogeneous preferences for travel schedules into the standard discrete-choice model, I separately evaluate the impact from adding high-speed trains and that from changes in train schedules. The results indicate that consumers who travel between two cities connected by high-speed trains benefit from the introduction of high-speed trains, while some travelers whose choice set does not include high-speed trains face a reduced frequency of non-high-speed trains, resulting in significant losses.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.6
• /
• pp.389-394
• /
• 2004

This paper proposes a speed estimation method using FLC(Fuzzy Logic Controller) in order to realize the speed control of PMAM(Permanent Magnet AC Motor) with no speed sensor. This method uses FLC as a adaptive laws of MRAS(Model Reference Adaptive System) and estimates the rotor speed of PMAM with a difference between the reference model and the adjustable model. Speed control is performed by PI controller with the estimated speed. The experiment is executed to verify the propriety and the effectiveness of the proposed system.

• Proceedings of the KIEE Conference
• /
• 2000.11b
• /
• pp.405-407
• /
• 2000

The most generally implemented method to detect the ground speed of the railway vehicles is to use the rotary type speed sensor attached to wheel axle. The Slip or sliding phenomenon on the railway vehicles occurs frequently caused by the weak viscosity of the wheel. Thus, precisely to control the car, the slip/sliding detection system is required. In this paper we proposed for the speed data management system, which uses rotary type speed sensor. Proposed speed management system can detect the slip/sliding with wheel axle as well as correct the generated speed error during in error time, to provide accurate speed and precise location data. The effectiveness for adapting to the railway system is clarified by the computer simulation.

• Journal of Biosystems Engineering
• /
• v.25 no.3
• /
• pp.233-240
• /
• 2000

A commercially available Doppler radar was modified and evaluated for on-board monitoring of ground speed. The radar output was corrected for pitch angle of aircraft based on the output of an electrolytic tilt sensor. The effects of aircraft speed, height and mounting angle on error in the ground speed were evaluated. The speed error decreased with an increase of the mounting angle since the radar contact angle with respect to the ground approached to the mounting angle. The error increased with an increase of the nominal aircraft speed. The altitude insignificantly affected the speed error. The Doppler radar provided acceptable percent errors within 5% in most measurements. The error can be reduced within ${\pm}$1.5% by increasing the mounting angle ($43^{\circ}$). The error of -3.8% at the mounting angle of $29^{\circ}$could be reduced by adjusting the mounting angle with respect to the radar contact angle.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.7
• /
• pp.61-68
• /
• 1998

The form accuracy of parts has become an important parameter. Therefore, dimensional tolerance and geometric tolerance are used in the design stage to satisfy required quality and functions of parts. But the informations on the machining conditions, which can satisfy the assigned geometric tolerance in design, are insufficient. The objectives of this research are to study the effects of the grinding parameters such as traverse speed, work speed, depth of cut, and dwell time on the after-ground workpiece shape, and to find out the major parameters among them. The results are as follows, The effects of work speed and depth of cut on workpiece shape are negligible compared with the effect of traverse speed. There is an optimal dwell time depending on the traverse speed. The optimal dwell time is decreasing as the traverse speed is increased.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.11
• /
• pp.233-243
• /
• 1998

The demand of high speed machining is increasing due to the high speed cutting and grinding provides high efficiency of process, short process time, improved metal removal capacity and better surface finish. Active magnetic bearings allow much high surface speed than conventional ball bearings and therefore greatly suitable for high speed cutting or grinding. This paper describes a design process of an active magnetic bearing system for a high speed grinding spindle with power 5.5kW and maximum speed 60,000rpm. Magnetic actuators are designed by the magnetic circuit theory considering static load condition, and examined with FEM analysis. Dynamic characteristics are also considered, such as bandwidth, stiffness, natural frequency and static deflection. System characteristics are simulated with a rigid rotor model.

• International Journal of Railway
• /
• v.4 no.2
• /
• pp.29-33
• /
• 2011

High-speed rail study needs to focus on passenger movements as a key element of the planning process. A particular challenge is obtaining comprehensive information on high-speed rail passenger movements. A national preference stated survey was conducted from October to November of 2011 to meet this challenge through direct personal interviews of travelers between Seoul and Busan (the so called Kyung-Bu corridor). Over 40 interviewers were hired and trained to conduct personal interviews at several stations along locations within Kyung-Bu Seoul and Busan corridor. A total of 4,550 travelers were interviewed, furnishing an extensive database on high-speed rail passenger movements. The methodology and procedure employed to collect the national data for Korean high-speed train KTX are described. Specific issues investigated include survey design, questionnaire and strategy. Lessons learned from the high-speed rail passenger movement study provide insights for other countries contemplating similar high-speed rail studies.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1435-1440
• /
• 2008

High-speed train under development is a type of EMU(electric multiple units). Since power sources like motors and gears are distributed in the high-speed EMU, the high-speed EMU generates vibration and sound more than the articulated high-speed train. Vibration of vehicle, vibration between rails and wheels, hunting of bogie and snake motion reduce ride comfort. In this paper, to decrease the vibration of the articulated high-speed train, improvements were presented using an analytical model and a simulation model. The simulation model of the high-speed EMU was designed on the basis of the korean high-speed train and the design parameters for ride comfort were showed and the dynamic characteristics of the vehicle was understood. To consider the characteristics of the vehicle suspension, the analytical model was designed and the simulation model was verified with it.

• Journal of The Korean Association For Science Education
• /
• v.2 no.1
• /
• pp.31-51
• /
• 1980

In order to research into the devel of the concept of movement and speed in our own way and compare with the Piaget's method, and then find out the formative period of such development, we have put the 192 primary school children as the model and obtained the following results. 1. As their grade upyards, all the experimental subjects showed the gradual progress generally regardless of sex or regions, while only the relative speed showed irregular progress. 2. There was no experimental subject which showed any remarkable sexual characteristics. But in the relative movement, the lower grade boys and higher grade girls made progress. In the subjects of circulation movement, intuition of speed, relative speed and speed of simultaneous movement, the boys marked better progress, whilst the girls were advanced a little in the speed of continuous movement with, different distance and time. 3. There was no conspicuous difference between the urban and rural areas, except a slight tendency that the urban children made better progress in the change of progressing direction, native continuous procedure of periodical movement, travelling road, and the speed of continuous movement with different distance and time whereas the rural children were more advanced in the relative movement, relative speed and intuition of speed. But it should be 'taken into consideration that the rural regions in our case were relatively developed in comparison with the traditional rural communities, which may explain about little regional difference. 4. Comparing our research results with the Piaget's theory, we have reached below results. Our research reports that the formative period of the conception of the problems of diverse progressing direction and a native continuous procedure of periodical movement was simultaneous, at the Piagetian level(at the fourth grade) which coincides with Piagetian theory. The travelling road should be made up a little lower at 2A/2B according' to Piagetian Level, whereas it was formed at the 4th grade as shown in our previous research. Intuition of speed should belong to the prior stage to concrete operation, but our research shows it was formed late at the 4th grade. Composition of displacement was made at the 6th grade, and it was almost equal to the first stage of formal operation(3A). But in the subjects of relative movement relative speed, the speed of continuous movement with different distance and time, relation and preservation of invariable speed, and accelerated motion, even 6th grade children marked a poor record. Summed up, the procedure conception as a basic movement conception coincides with the Piagetion level. But as for speed intuition, relative speed and speed fixation, it was Jar behind Piagetian level. Therefore it is required that we have to concentrate on the systematic training in these parts on the spot.