• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.2
• /
• pp.193-199
• /
• 2000

The a-C : H films have been grown on the glass substrate by PECVD method, where plasma was generated with a 60 Hz line power source. The growth rate of films is found to be dependent of the partial pressure of $C_2H_2$. This growth rate is a little higher than that in which $CH_4$ instead of $C_2H_2$ is used. The transmittance is also much higher(95%). The optical energy gap of films is in the range of 1.4~1.8eV depending on the partial pressure of $C_2H_2$. However, this energy gap, which is 1.8eV, is found to be independent of the partial pressure of $C_2H_2$ for the thick films above $2000{\AA}$. The carbonization is checked from peak intensities of D ($sp^3$) and G($sp^2$) peaks in Roman spectra. The hydronization and C-H bonding status in films can also be determined from FTIR results. Both the bonding strength of C-H and the ratio of $sp^3$ to $sp^2$ in bonding are found to be slightly dependent of partial pressure of $C_2H_2$. Judging from above results, we can conclude that the best value for partial pressure of $C_2H_2$ in growing process of thick films is about 13.8%.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2018.05a
• /
• pp.175-176
• /
• 2018

• Transactions on Electrical and Electronic Materials
• /
• v.2 no.3
• /
• pp.1-6
• /
• 2001

A simulation method is proposed to study the amorphous structure of carbon nitride. The material properties of a non-uniform nitrogen distribution in an amorphous CN matrix can be studied. The cohesive energy of a group of randomly generated atoms can be minimized to find the relative positions of atoms. From the calculated configuration of atoms, many properties of amorphous carbon nitride can be calculated such as bulk modulus, P-V curve, sp$^3$/sp$^2$ ratio of carbon, and vibrational spectra. The calculation shows that the cohesive energy of non-uniform nitrogen distribution is lower than that of a uniform distribution. This may suggest that the regular structure of carbon nitride can at most be metastable. It is not easy to incorporate nitrogen atoms into a carbon matrix.

• Journal of Microbiology and Biotechnology
• /
• v.28 no.3
• /
• pp.432-438
• /
• 2018

Microalgae hold promise as a renewable energy source for the production of biofuel, as they can convert light energy into chemical energy through photosynthesis. However, cost-efficient harvest of microalgae remains a major challenge to commercial-scale algal biofuel production. We first investigated the potential of electrolytic water as a flocculant for harvesting Tetraselmis sp. Alkaline electrolyzed water (AEW) is produced at the cathode through water electrolysis. It contains mineral ions such as $Na^+$, $K^+$, $Ca^{2+}$, and $Mg^{2+}$ that can act as flocculants. The flocculation activity with AEW was evaluated via culture density, AEW concentration, medium pH, settling time, and ionic strength analyses. The flocculation efficiency was 88.7% at 20% AEW (pH 8, 10 min) with a biomass concentration of 2 g/l. The initial biomass concentration and medium pH had significant influences on the flocculation activity of AEW. A viability test of flocculated microalgal cells was conducted using Evans blue stain, and the cells appeared intact. Furthermore, the growth rate of Tetraselmis sp. in recycled flocculation medium was similar to the growth rate in fresh F/2 medium. Our results suggested that AEW flocculation could be a very useful and affordable methodology for fresh biomass harvesting with environmentally friendly easy operation in part of the algal biofuel production process.

• ALGAE
• /
• v.31 no.3
• /
• pp.257-266
• /
• 2016

Nitrogen is one of the most critical nutrients affecting cell growth and biochemical composition of microalgae, ultimately determining the lipid or carbohydrate productivity for biofuels. In order to investigate the effect of nitrogen sources on the cell growth and biochemical composition of the marine microalga Tetraselmis sp., nine different N sources, including NaNO₃, KNO₃, NH₄NO₃, NH₄HCO₃, NH₄Cl, CH₃COONH₄, urea, glycine, and yeast extract were compared at the given concentration of 8.82 mM. Higher biomass concentration was achieved under organic nitrogen sources, such as yeast extract (2.23 g L⁻¹) and glycine (1.62 g L⁻¹), compared to nitrate- (1.45 g L⁻¹) or ammonium-N (0.98 g L⁻¹). All ammonium sources showed an inhibition of cell growth, but accumulated higher lipids, showing a maximum content of 28.3% in ammonium bicarbonate. When Tetraselmis sp. was cultivated using yeast extract, the highest lipid productivity of 36.0 mg L⁻¹ d⁻¹ was achieved, followed by glycine 21.5 mg L⁻¹ d⁻¹ and nitrate 19.9 mg L⁻¹ d⁻¹. Ammonium bicarbonate resulted in the lowest lipid productivity of 14.4 mg L⁻¹ d⁻¹. The major fatty acids in Tetraselmis sp. were palmitic, oleic, linoleic and linolenic acids, regardless of the nutritional compositions, indicating the suitability of this species for biodiesel production.

• Microbiology and Biotechnology Letters
• /
• v.46 no.4
• /
• pp.377-389
• /
• 2018

In this study, a novel microalgal strain, Desmodesmus sp. KAERI-NJ5, was isolated, identified, and evaluated as a candidate for biodiesel feedstock. In a preliminary study, the effects of four general microalgal growth factors, including temperature, pH, light intensity, and concentration of nitrogen source ($KNO_3$), on the microalgal photoautotrophic growth were evaluated. With the exception of light intensity, the growth factors needed to be optimized for the microalgal biomass production. Optimization was done using response surface methodology. The optimal conditions for biomass production were pH 6.54, $27.66^{\circ}C$, and 0.52 g/l $KNO_3$. The biomass production at the optimal conditions was 1.55 g/l, which correlated well with the predicted value of 1.5 g/l. The total lipid and fatty acid methyl ester contents of the cells grown at the optimal conditions were 49% and 21.2% of cell dry weight, respectively. To increase the lipid content of the biomass, microalgae were challenged by nitrogen starvation. Enhancement of total lipid and fatty acid content up to 52.02% and 49%, respectively, were observed. Lipid analysis of the nitrogen-starved cells revealed that C16 and C18 species accounted for 95.9% of the total fatty acids. Among them, palmitic acid (46.17%) and oleic acid (39.43%) dominantly constituted the algal fatty acids. These results suggest Desmodesmus sp. KAERI-NJ5 as a promising feedstock for biodiesel production.

• Journal of Microbiology and Biotechnology
• /
• v.3 no.4
• /
• pp.224-231
• /
• 1993

The nucleotide sequence of the xylanase gene (xynY) from alkalophilic Bacillus sp. YC-335 was determined and analyzed. An open reading frame of 1, 062 base pairs for xynY gene was observed and encoded for a protein of 354 amino acids with a molecular weight of 38, 915. S1 nuclease mapping showed that the transcription initiation sites of the xynY gene were different in Bacillus sp. YC-335 and Escherichia coli HB101 (pYS55). S1 mapping also showed that -10 region of the xynY gene recognized by RNA polymerases of E. coli and Bacillus sp. YC-335 were TACAGT and TATGAT , respectively. A ribosome binding site sequence with the free energy of -17.0 Kcal/mol was observed 9 base pairs upstream from the unusual initiation codon, TTG. The proposed signal sequence consisted of 27 amino acids, 2 of which were basic amino acid residues and 21 were hydrophobic amino acid residues. When the amino acid sequences of xylanases were compared, Bacillus sp. YC-335 xylanase showed more than 50% homology with xylanases from B. pumilus, B. subtilis, and B. circulans.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2004.10a
• /
• pp.911-912
• /
• 2004

1. Cathodic hydrogen charging considerably reduced the tensile ductility of ODS steels and a 9Cr-2W RMS. The hydrogen embrittlement of ODS steels was strongly affected by specimen sampling orientation, showing significant embrittlement in the T-direction. This comes from the microstructural anisotropy caused by elongated grains of ODS steels in L-direction. 2. The ODS steels contained a higher concentration of hydrogen than 9Cr-2W RMS at the same cathodic charging condition, and the critical hydrogen concentration required to transition from ductile to brittle fracture was in the range of $10{\sim}12$ wppm, which approximately 10 times larger than that of a 9Cr-2W martensitic steel. 3. The ODS steels showed a typical ductile to brittle transition behavior and it strongly depended on the specimen sampling direction, namely L- and T-direction. In T-direction, the SP-DBTT was about 170 L, irrespective of the ODS materials, and L-direction showed a lower SP-DBTT than that of T-direction.

• Journal of Microbiology
• /
• v.37 no.3
• /
• pp.123-127
• /
• 1999

A Pseudomonas sp. strain DJ-12 isolated by 4-cholrobiphenyl enrichment culture technique is capable of utilizing 4-hydroxybenzoic acid as a sole source of carbon and energy. The bacterium catabolized 4-hydroxybenzoic acid through the intermediate formation of protocatechuic acid, which was further metabolized. The cell free extracts of pseudomonas sp. DJ-12, grown on 4-hydroxybenzoic acid showed higher activities of 4-hydroxyenzoate 3-hydroxylase and protocatechuate 4,5-dioxygenase, but the activity of catechnol 2,3-dioxygenase was lower. The results suggest that 4-hydroxybenzoic acid is catabolized via protocatechuic acid rather than catechol or gentisic acid in this bacterium and that the protocatechuic acid formed was metabolized through a metacleavage pathway by protocatechuate 4,5-dioxygenase.

• Microbiology and Biotechnology Letters
• /
• v.27 no.6
• /
• pp.452-457
• /
• 1999

Several bacterial strains utilizing crude oil as their sole carbon and energy sources were isolated from marine. One of the strains named KCL-1 showed the highest degradative activity for crude oil and the best growth rate. This strain was identified as a Klebsiella sp. based on the morphological, biochemical, and physiological characteristics. The optimum cultural conditions were as follows; $32^{\circ}C$~$37^{\circ}C$ for temperature and 7.0 for initial pH. Additionally, the optimal concentration of sodium chloride was 3.0%, indicating that this strain was derived from seawater. KCL-1 could use several kinds of n-alkane hydrocarbons from octadecane to hexacosane as a sole carbon source. The degradation of crude oil by KCL-1 was stimulated by addition of octadecane in the culture. The emulsifying activity by KCL-1 was highest after 3 days of cultivation under the condition of 3.0% sodium chloride, pH 7.0 and $37^{\circ}C$.