• Annals of Hepato-Biliary-Pancreatic Surgery
• /
• v.26 no.4
• /
• pp.407-411
• /
• 2022

Mesenchymal hamartoma of the liver (MHL) is a rare benign tumor that often presents in early childhood, and it rarely occurs in adulthood. Aberrant development of the portal tract is a known cause of MHL. Although limited information is available on the natural course of MHL, malignant transformation has been reported in a few cases. Here, we report a case of a 26-year-old female with intrahepatic cholangiocarcinoma secondary to unresected MHL. The patient underwent resection of the hepatic mass, which was diagnosed as MHL at 2 years of age, due to an increase in mass size and a suspicion of malignant transformation during work-up. Histopathology confirmed intrahepatic adenosquamous carcinoma in the background of MHL, with a T2N0M0 pathological stage (stage II). The surgical margin was free from tumor cells. The patient fully recovered postoperatively and started receiving adjuvant chemotherapy. Previous case reports have only reported about the development of undifferentiated embryonal sarcoma or angiosarcoma as malignant transformation of MHL. Cases of other malignancies have not been published; however, it is difficult to rule out the occurrence of various malignancies related to the portal tract when considering the pathogenesis of the disease. To the best of our knowledge, this is the first case report of adenocarcinoma of bile duct origin secondary to MHL. This case report suggests that aggressive surgical management should be considered after the initial diagnosis of MHL.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.2
• /
• pp.203-209
• /
• 2008

Recrystallization characteristics of salt after removing bittern and impurities from solar salt (SD) were investigated. To remove the bittern, the SD was treated at 30, 40 and $50^{\circ}C$ under 95% humidity. 86% of the bittern was removed when the SD was kept at $30^{\circ}C$ for three weeks. Total amount of impurity in SD was 6.94% (w/w) with organic impurity (5.58%) and inorganic impurity (1.36%). Most organic impurities (89%) were soluble. When the SD was roasted at $350^{\circ}C$ for 40 minutes, 90.14% of the soluble organic impurities were removed; however, the removable organic impurity was reduced, when the SD roasted for 50 minutes at $350^{\circ}C$. L* value decreased while a* and b* values increased when the SD was roasted until 40 minutes at $350^{\circ}C$. In contrast, L* value increased while a*, b* values decreased with SD roasted over 50 minutes at $350^{\circ}C$. The size of recrystallized pure salt was positively correlated to temperature and depth of salt solution, while the crystallization time was negatively correlated to temperature and salinity. Yield of recrystallized salt was negatively correlated to temperature. Overall acceptability tended to increase at low crystallization temperature and high salinity.

• Journal of Korean Philosophical Society
• /
• v.126
• /
• pp.321-343
• /
• 2013

The Reformation seems to have nothing to do with modern philosophy, but in reality closely related to it. From a philosophical point of view, the Reformation had a profound effect on the formation of modern philosophy in two respects. Voluntarism, asserting the predominance of divine will over divine reason, which is the basic principle of the Reformation, allowed an arbitrary interpretation of the Bible by ignoring the tradition of the Church and emphasizing 'Sola Fide'. As a result, the severe religious disputes arose and the modern intellectuals sought a deism and natural religion as an universal religion which is expected to put an end to religious conflicts. Moreover, voluntarism changed the way of inquiring nature from the speculative to the experimental based on observation and experiment, and provided the clues of the birth of experimental philosophy (empiricism) which is the experimental inquiry of human nature. In short, the Reformation brings about the search for universal religion on the one hand, but on the other the advent of experimental philosophy. Universal religion is not a mystic religion on which the religious behaviors and practices are based but just a world view that is the basis for scientific inquiry, and it was nothing but a philosophy for science. And also the experimental philosophy was a philosophy by science in that it is a science of human nature through experiment and observation, After all, the Reformation expelled religion from the main living room of philosophy and placed science on the spot instead.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.23 no.3
• /
• pp.1-10
• /
• 2021

Harnesses are used in a variety of industries, such as rescue operations, medicine, and entertainment. However, conventional harnesses have problems as they are uncomfortable to wear and causes continuous pain. Therefore, in this study, the load and pressure applied to the body in the flying state when using a conventional harness were measured in real time and the distribution change was observed. Load and pressure were measured using a modified corset harness, a pressure sensor, and a human mannequin to measure the maximum and average pressure on the waist. As a result, it was confirmed that the load concentrated on the waist in the flying state was 104 N, and the pressure was applied to the left and right sides was 800 kPa or greater. The pressure distribution showed a pressure of 3-45 kPa in 73% in all measurable pressures. The results of the load and pressure distribution are presented as basic data for improving the wearability and reducing the discomfort of harnesses in the future, aid in the development of a harnesses that can minimize discomfort for various activities, and increase the concentration on experiential activities. In addition, using the CLO 3D program, which is a 3D virtual wearing system, a harness was put on a virtual model, and the compression level was checked and compared with the actual pressure distribution. As a result of comparing the measured pressure values in the flying state with the clothing pressure wearing the harness in the CLO 3D program, the total pressure value was found to be about 68% of the actual measured value. This helps develop a harness that can minimize discomfort during activities by predicting the load and pressure on the body by first applying new designs to a virtual wearing system during development. These new harness patterns can solve the problems of conventional harnesses.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.4
• /
• pp.405-412
• /
• 2019

SOLAS requires that ECDIS be installed on ships of more than 500 gross tonnage engaged in international navigation until the first inspection arriving after July 1, 2018. Several accidents related to the use of ECDIS have occurred with its installation as a new major navigation instrument. The 12 incident reports issued by MAIB, BSU, BEAmer, DMAIB, and DSB were analyzed, and the cause of accident was determined to be related to the operation of the navigator and the ECDIS system. The text was analyzed using the R-program to quantitatively analyze words related to the cause of the accident. We used text mining techniques such as Wordcloud, Wordnetwork and Wordweight to represent the importance of words according to their frequency of derivation. Wordcloud uses the N-gram model as a way of expressing the frequency of used words in cloud form. As a result of the uni-gram analysis of the N-gram model, ECDIS words were obtained the most, and the bi-gram analysis results showed that the word "Safety Contour" was used most frequently. Based on the bi-gram analysis, the causative words are classified into the officer and the ECDIS system, and the related words are represented by Wordnetwork. Finally, the related words with the of icer and the ECDIS system were composed of word corpus, and Wordweight was applied to analyze the change in corpus frequency by year. As a result of analyzing the tendency of corpus variation with the trend line graph, more recently, the corpus of the officer has decreased, and conversely, the corpus of the ECDIS system is gradually increasing.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.23 no.1
• /
• pp.37-45
• /
• 2021

This study observed the release of microplastics according to washing weights and filtering conditions, measured microplastic generation rates, fiber lengths, and fiber diameters. This study attempted to present data for the development of filters that decrease microplastic generation. For test samples, polyester piled knit fabric (cut-pile) was selected, which currently has the highest amount of consumption in the clothing industry, but can easily cause marine pollution because of its low biodegradability. For test equipment, a drum washer was used and microplastics were collected using two filter pore sizes, 5 ㎛ and 20-25 ㎛. Microplastic fibers weights and lengths were measured. The results of the experiment showed the following: 1) The release of microplastics differed according to the fabric weights and washing process; 2) washing fabric weights showed a differences in the collection amount according to the filter pore size (5 ㎛, 20-25 ㎛); 3) observations of differences in the lengths of the microplastics that occur during the washing process by filter pore size were made. Fibers with shorter lengths appeared with filter pore sizes of 5㎛ in comparison to filter pore sizes of 20-25㎛. The results from this study on microplastic generation by fabric during washing, demonstrated the following conclusions that can be used to reduce the release of microplastics. First, the release of microplastics according to fabric weights and washing courses are affected by physical force. Therefore, it is necessary to reduce the amount of physical force due to water flow, increase the fabric weight, or wash the material in low temperatures. Second, in the manufacturing of washing machines, microplastic filtration can be promoted or legislatation supporting microplastic filtration can be introduced.

• Annals of Hepato-Biliary-Pancreatic Surgery
• /
• v.27 no.3
• /
• pp.313-316
• /
• 2023

Attenuated portal vein (PV) flow is challenging in pediatric liver transplantation (LT) because it is unsuitable for classic end-to-end jump graft reconstruction from a small superior mesenteric vein (SMV). We thus introduce a novel technique of an end-to-side jump graft from SMV during pediatric LT using an adult partial liver graft. We successfully performed two cases of end-to-side retropancreatic jump graft using an iliac vein graft for PV reconstruction. One patient was a 2-year-old boy with hepatoblastoma and a Yerdel grade 3 PV thrombosis who underwent split LT. Another patient was an 8-month-old girl who had biliary atresia and PV hypoplasia with stenosis on the confluence level of the SMV; she underwent retransplantation because of graft failure related to PV thrombosis. After native PV was resected at the SMV confluence level, an end-to-side reconstruction was done from the proximal SMV to an interposition iliac vein. The interposition vein graft through posterior to the pancreas was obliquely anastomosed to the graft PV. There was no PV related complication during the follow-up period. Using a jump vascular graft in an end-to-side manner to connect the small native SMV and the large graft PV is a feasible treatment option in pediatric recipients with inadequate portal flow due to thrombosis or hypoplasia of the PV.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.5
• /
• pp.482-488
• /
• 2014

This paper aims to analyze user's emotion automatically by analyzing Twitter, a representative social network service (SNS). In order to create sentiment analysis models by using machine learning techniques, sentiment labels that represent positive/negative emotions are required. However it is very expensive to obtain sentiment labels of tweets. So, in this paper, we propose a sentiment analysis model by using self-training technique in order to utilize "data without sentiment labels" as well as "data with sentiment labels". Self-training technique is that labels of "data without sentiment labels" is determined by utilizing "data with sentiment labels", and then updates models using together with "data with sentiment labels" and newly labeled data. This technique improves the sentiment analysis performance gradually. However, it has a problem that misclassifications of unlabeled data in an early stage affect the model updating through the whole learning process because labels of unlabeled data never changes once those are determined. Thus, labels of "data without sentiment labels" needs to be carefully determined. In this paper, in order to get high performance using self-training technique, we propose 3 policies for updating "data with sentiment labels" and conduct a comparative analysis. The first policy is to select data of which confidence is higher than a given threshold among newly labeled data. The second policy is to choose the same number of the positive and negative data in the newly labeled data in order to avoid the imbalanced class learning problem. The third policy is to choose newly labeled data less than a given maximum number in order to avoid the updates of large amount of data at a time for gradual model updates. Experiments are conducted using Stanford data set and the data set is classified into positive and negative. As a result, the learned model has a high performance than the learned models by using "data with sentiment labels" only and the self-training with a regular model update policy.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.852-858
• /
• 2016

To safeguard the accommodation spaces on cargo ships from fire, structural fire protection provisions introduced by SOLAS and these measures retard the propagation of flames and smoke. SOLAS also specifies provisions for fire fighting drills. These provisions are a combination of regulations regarding structure and equipment and those dealing with the human element for the fire protection and effective responses in the event of fire. Requirements related to the human element play a supporting role to the requirements for structure and equipment because the present accommodation structure and equipment are insufficient for extinguishing a fire, therefore, fire-extinguishing activity performed by crew members is essential. To reduce human error and ensure effective fire fighting, it is necessary to install a fire-fighting system and improve the fire fighting process. The fundamental concept of fire fighting exercises is to commence fire fighting before the fire grows too big to extinguish. It is essential to relocate the storage place of fire fighting equipment to expedite the fire-fighting exercise. This study was carried out to reduce human risk for this purpose, the fire control station was relocated to a site that could be accessed from the open deck. Further, two sets of a fire fighter's outfit were stored at the same site. This relocation eliminated the risk of the crew reentering to operate the fire fighting system in the fire control station and allowed the crew to pick up the fire fighters' outfits quickly in the event of a fire. In addition, it was proposed that the IIC method be made mandatory. This method is combination of automatic fire detection system and sprinkler system which can reduce the risk of the fire fighting exercises for the crew and to suppress fire in the initial stage. This study was carried out to provide a foundation to the possible amendment of the relevant SOLAS regulations and national legislation.

• Resources Recycling
• /
• v.29 no.2
• /
• pp.55-61
• /
• 2020

Selective catalytic reduction (SCR) has been a promising technology to reduce the air pollution caused by nitrogen oxides (NOx) in several industries. The consumption of SCR catalysts increases every year as technology evolves, however those have a limited lifespan and usually end up in landfills after they deactivate. Currently, the most widely used catalyst for and stationary applications is V₂O₅-WO₃/TiO₂ which can contain around 50% wt V₂O₅ and 7-10% wt of WO₃. The vast uses for both vanadium and tungsten and the worldwide interest in recycling methods that allow for the extraction of metals from secondary sources represent the major motivation for this research. The extraction time, pH dependency, extraction concentration studies were carried out using Aliquat 336 in exxol D80 as the extractant. It was determined that to optimize the extraction of both metals 30min of contact time with an organic phase containing 0.5mol/L of Aliquat 336 are needed at a slightly acidic pH (~5.0). In addition, counter McCabe-Thiele studies allowed us to determine that one stage is necessary for the removal of 99% of vanadium while 2 stages are necessary for the extraction of tungsten and counter current simulations proved that the theoretical approach was correct.