• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.133-134
• /
• 2006

A simple doping method to fabricate a very thin channel body of the n-type fin field-effect-transistor (FinFET) with a 20 nm gate length by solid-phase-diffusion (SPD) process is presented. Using As-doped spin-on-glass as a diffusion source of arsenic and the rapid thermal annealing, the n-type source-drain extensions with a three-dimensional structure of the FinFET devices were doped. The junction properties of arsenic doped regions were investigated by using the $n^+$-p junction diodes which showed excellent electrical characteristics. Single channel and multi-channel n-type FinFET devices with a gate length of 20-100 nm was fabricated by As-SPD and revealed superior device scalability.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.559-562
• /
• 2004

A 2.2-inch QCIF+ $(176{\times}RGB{\times}220)$ TFT-LCD with integrated row driver was developed using a standard amorphous silicon TFT technology. At low temperature $({\sim}-20^{\circ}C)$, the integrated row driver operation is dramatically effected by the electron drift mobility variation $({\sim}50%)$ and the threshold voltage shift $({\sim}1V)$ of the a-Si TFT. We studied the temperature dependency of the circuit design and found that higher on-current circuit is important to guarantee good operation in wide temperature range.

• Molecules and Cells
• /
• v.26 no.6
• /
• pp.576-582
• /
• 2008

Nervous system development takes place after positional information has been established along the dorsal-ventral (D/V) axis. The initial subdivision provided by a gradient of nuclear dorsal protein is maintained by the zygotic genes expressed along the D/V axis. In this study, an investigation was conducted to determine the range of Dpp function in repressing the expression of eagle (eg) that is present in intermediate neuroblasts defective (ind) and muscle specific homeobox (msh) gene domain. eg is expressed in neuroblast (NB) 2-4, 3-3 and 6-4 of the msh domain, and NB7-3 of the ind domain at the embryonic stage 11. In decapentaplegic (dpp) loss-of-function mutant embryos, eg was ectopically expressed in the dorsal region, while in dpp gain-of-function mutants produced by sog or sca-GAL4/UAS-dpp, eg was repressed by Dpp. It is worthy of note that Dpp produced from sim;;dpp embryos showed that Dpp could function at long range. However, Dpp produced from en-GAL4/UAS-dpp or wg-GAL4/UAS-dpp primarily acted at short-range. This result demonstrated that this discrepancy seems to be due to the repression of Dpp to EGFR signaling in sim;;dpp embryos. Taken together, these results suggest that Dpp signaling works at short-range, but can function indirectly at long-range by way of repression of EGFR signaling during embryonic neurogenesis.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.251.1-251.1
• /
• 2014

Oraganic Light Emitting Diodes (OLED) 소자의 광추출 효율을 향상시키기 위한 방안으로 나노급 사이즈의 고 굴절률 패턴을 기판의 내부 패턴에 적용하였다. 100 nm 및 300 nm의 직경을 갖는 Si3N4 나노 패턴을 나노 임프린트 리소그래피와 건식 식각 공정을 통하여 OLED의 유리기판에 형성을 하였다. 그리고 Silicon On Glass (SOG) 물질을 패턴이 전사된 기판에 스핀 코팅으로 평탄화 공정을 진행 함으로써 OLED소자의 전기적인 특성이 떨어지는 문제점을 개선하였다. 그러고 나서 Si3N4 나노 패턴이 형성되고 평탄화 공정을 마친 기판상 OLED 소자를 제작하였다. OLED의 발광층에서 발생한 빛은 Si3N4 나노패턴에 의해 산란되어 광 추출 효율을 개선할 수 있다. 본 연구에서 두 가지 종류 100nm, 300nm 높이의 Si3N4 나노패턴으로 높이에 따른 광 추출 효율을 비교하고자 OLED 소자를 제작하였다. 기판에 Si3N4 패턴이 형성된 OLED의 효율은 Si3N4 300nm에서 13.1% 증가하였다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.30.1-30.1
• /
• 2010

Hydrogen silsesquioxane (HSQ)는 spin-on glass (SOG)의 일종으로 spin-coating이 가능하며 $400^{\circ}C$ 이상의 고온에서의 어닐링을 통해 silica로 변환되는 물질이다. 이 물질은 가시광선 영역에서 95% 이상의 높은 투과도를 나타내며 산화물로의 변환 공정이 간단하며 표면 개질이 용이하기 때문에 나노 바이오, 반도체, 광전자 소자 등의 다양한 분야로의 적용이 기대되는 물질이다. 최근 나노 기술의 발전에 따라 다양한 나노 구조물을 이용하여 소자들의 효율을 향상시키는 연구가 활발하게 진행되고 있다. 따라서 HSQ를 이용하는 소자의 효율을 높이기 위해서는 쉽고 간단하면서 생산성이 높은 HSQ 나노 구조물 제작 기술에 대한 연구가 필요하다. 현재 개발된 대면적 HSQ 나노 구조물 제작 기술로는 e-beam lithography, x-ray lithography, room temperature nanoimprint lithography 등이 있다. 하지만 이와 같은 나노 패터닝 기술들은 생산성이 낮거나 공정이 복잡한 단점이 있다. 본 연구에서는 poly(dimethylsiloxane) (PDMS) mold를 이용한 직접 printing 기술을 통해 HSQ 나노 구조물을 제작하는 기술을 개발하였다. 이 기술은 대면적에 간단한 기술로 HSQ 나노 패턴을 제작할 수 있으며 master mold의 패턴이 그대로 HSQ layer로 전사되기 때문에 제작이 까다로운 아날로그 패턴도 손쉽게 제작할 수 있는 장점을 가지고 있다. 따라서 이와 같은 HSQ 직접 printing 기술을 이용하여 HSQ 아날로그 나노 패턴을 제작하고 이의 응용기술에 대한 연구를 진행하였다.

• Korean Journal of Ichthyology
• /
• v.26 no.4
• /
• pp.336-339
• /
• 2014

The spadenose shark, Scoliodon laticaudus, belongs to the family carcharhinidae was described as the first record from Korea based on a single specimen collected from the South Sea of Korea. The species is characterized by having a greatly depressed and trowel-shaped head, a depressed and long snout, triangular pectoral fins, and posterior tip of the first dorsal fin reaching the middle of pelvic fin. We propose a new Korean names of the genus Scoliodon and the species S. laticaudus as "Nab-jag-ju-dung-i-sang-eo sog" and "Nab-jag-ju-dung-i-sang-eo", respectively.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.10a
• /
• pp.114-116
• /
• 2014

The interpolation of the missing AIS dynamic data can be used for predicting the lost data of the ship's state which is able to product the valuable information for analyzing and investigating the maritime accidents. The previous research proposed some interpolating methods however there exists some problem, firstly, the interpolated parameters such as COG, SOG, HDG weren't described sufficiently and accurately as in AIS message, secondly, each method is only suitable to some kinds of given AIS data, finally at heavy wind and current area, the parameters of AIS dynamic change quickly in short time, therefore, the modelling of the variation of ship's dynamic based on the physical characteristic is very difficult, in these cases the time-series and numerical method are usually better. This research proposes the other method through numerical analysis which can be suitable for many different kinds of the lost data, parameters are interpolated sufficiently, beside that this model is appropriate to all variation in short time interval. All the given AIS dynamic are regarded as the functions to time, then curves are established for fitting all data. Experiments are carried out to evaluate the performance of this approach, the interpolation results show this approach can be applied well in practice.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.88-89
• /
• 2015

In cold weather, the speed of concrete strength development is slow. As a result, construction speed becomes slow and it is problem for all construction site to solve this. So in this study, to shorten removing frame time after placing concrete, mix proportion using early-strength-binder(ESB) and curing method such as using heat line in concrete was considered. At first, concrete mix proportion was examined at -5℃ temperature between ordinary portland cement(OPC) and ESB. And second step, concrete, using mix proportion with OPC, was examined according to curing method(: 1) heat line used and 2) no heat line) and kinds of form (: 1) Deck slab, 2) Half PC slab and 3) SOG slab). All cases are same condition: slab thickness is 1,500mm, double-bubble sheet is used as a curing sheet after placing concrete. After the test, OPC is enough to get strength compared to ESB in special condition and 48~60 hours is needed according to form condition.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.68-69
• /
• 2007

To make cost-effective solar cells, We have to use low cost material or make short process time or high temperature process. In solar cells, formation of emitter is basic and important technique according to build-up P-N junction. Diffusion process using spin-on dopants has all of this advantage. In this paper, We investigated n+ emitter formation spin-on dopants to apply crystalline silicon solar cells. We known variation of sheet resistance according to variation of temperature and single-crystalline and multi-crystalline silicon wafer using Honeywell P-8545 phosphorus spin-on dopants. We obtain uniformity of sheet resistance within 3~5% changing RPM of spin coater.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.3 no.2
• /
• pp.177-185
• /
• 2001

This study has been carried out to determine localization of Manduca sexta allatotropin (Mas-AT) neuropeptide in developing ventral nerve cord of the silk moth Bombyx mori with polyclonal antisera against Mas-AT. Suboesophageal ganglion (SOG) of the second to fifth instar larvae and 3-day-old pupae showed two to ten Mas-AT-immunoreactive (Mas-AT-IR) cell bodies. There were two to three pairs of labeled cell bodies in each thoracic ganglion (TG) from third instar larvae to adults, with the exception of TG from prepupae. One pair of labeled cell bodies was localized in each abdominal ganglion (AG) 1 to 6 from third instar larvae to 3-day-old pupae, whereas in 5-day-old pupae to adults there was one pair in a similar location of AG 1 to 5. The seventh neuromeres of terminal abdominal ganglia (TAG) from third instar Iarvae to 3- day-old pupae contained four labeled large cell bodies. In each of AG 1 to 7, these cell bodies showed similar allatotropin-immunoreactivity in appearance. Some labeled axons, projected from Mas-AT-lR cells in each of those AG, were extended to the nerves N 1 and N 2.