• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.387-388
• /
• 2020

본 논문은 패시브 셀 밸런싱과 액티브 셀 밸런싱의 에너지 손실 비교에 관한 연구내용이다. 패시브 셀 밸런싱은 저항을 이용하여 과충전된 셀의 에너지를 소모하는 방식이며 액티브 셀 밸런싱은 SSC(Single Switched Capacitor) 구조를 이용하여 높은 에너지 셀의 에너지를 낮은 에너지 상태의 셀로 전달하는 방식이다. 높은 셀과 낮은 셀의 SOC(State Of Charge)의 차이가 5% (0.085 V)일 때 ∆SOC = 3% (∆V = 0.051 V)로 줄이기 위해 패시브 셀 밸런싱과 액티브 셀 밸런싱을 하여 두 셀 밸런싱의 에너지 손실 차이를 시뮬레이션과 실험을 통하여 비교한다.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.313-314
• /
• 2013

전기자동차용 급속충전기는 배터리의 SOC(State of Charge)가 낮은 경우 전류제어를 통해 배터리를 충전해 준다. 하지만 배터리가 충전되어 SOC가 최대치인 100%에 가까워졌을 경우 과충전을 방지하기 위해 전압제어로 배터리를 충전해 주는데 충전기가 전류제어에서 전압제어로 바뀌면서 과도상태가 발생하게 된다. 본 논문에서는 배터리 충전을 위한 전류제어에서 과충전 방지를 위한 전압제어로 과도상태 없이 변환될 수 있도록 제한적 2중루프 제어를 통한 급속충전기의 과충전 방지 제어 알고리즘을 제안한다. 제안된 알고리즘은 시뮬레이션을 통해 검증하였고 차량용 50kW 급속충전기에 적용되어 제주도 스마트 그리드 실증센터에 설치되었다.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.503-505
• /
• 2012

본 연구에서는 실증기능 구현을 위해 75KW로 설계된 리튬-폴리머배터리(Lithium Polymer Battery 이하 배터리)와 ESS(Energy Storage System) 내장형 Hybrid-PCS(이하 PCS)을 이용하여 불균일한 풍력 발전원에 대한 Smoothing 제어 및 정출력 제어 대한 연구를 진행 하였다. 잦은 전류 변동으로 인해 발생되는 출력 변동의 안정화를 위해 인버터 전류제어, 벅/부스트 전압제어 기법을 사용하였다. 최적의 Smoothing 제어를 위한 필터 계수 값을 찾기 위한 시험을 진행 하였으며 Energy shift을 위한 정출력 시험도 진행 하였다. 또한 각 제어 모드에서 ESS 중요 파라미터인 SOC(State Of Charge 이하 SOC)변화를 배터리 특성과 관련하여 분석해 보았다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.7
• /
• pp.1161-1168
• /
• 2016

Battery energy storage system(BESS) attract the attention of the power system operators with its fast response to a disturbance in spite of its limited energy capacity. This paper proposes the operating method of BESS for following the Automatic Generation Control(AGC) frequency control which is centrally distributed by a system operator. As BESS needs to just meet the control requirement from the system operator, it should be able to properly manage the state of charge(SOC) of BESS to be available to control signal. For doing these, the proposed method distributes the control requirement to available batteries in proportion to its SOC. In addition, unavailable batteries are controlled to recover the SOC to an appropriate range, and the recovering power is supplied by available batteries meeting the control requirement. Moreover, the proposed method manages the efficiency of power conversion system (PCS) by limiting the number of PCS to be assigned for the low control requirement. Finally, the case studies are carried out to verify the effectiveness of proposed strategy.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.10
• /
• pp.57-63
• /
• 2018

The operating system for an isolated microgrid, which is completely disconnected from the central power system, aims at preventing blackouts and minimizing power generation costs of diesel generators through efficient operation of the energy storage system (ESS) that stores energy produced by renewable energy generators and diesel generators. In this paper, we predict the amount of renewable energy generation using the weather forecast and build an optimal diesel power generation plan using a genetic algorithm. In order to avoid inefficiency due to inaccurate prediction of renewable energy generation, our search algorithm imposes penalty on candidate diesel power generation plans that fail to maintain the SOC (state of charge) of ESS at an appropriate level. Simulation experiments show that our optimization method for maintaining an appropriate SOC balance can prevent the blackout better when compared with the previous method.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.4
• /
• pp.231-235
• /
• 2015

Bimodal Tram developed by KRRI is driven by a series Hybrid propulsion system which has both the CNG engine, generator and LPB(Lithium Polymer Battery) pack. It has three driving modes; Hybrid mode, Engine mode and Battery mode. Even in case of Battery mode, LPB pack to get enough power to drive the vehicle only by itself onsists of 168 LPB cells(80Ah per lcell), 650V. It is important thing to manage LPB pack in a right way, which will extend the lifetime of LPB cells and operate in the hybrid mode effectively. This paper has shown the development of battery management system(12 BMS, 1 BMS per 14cells) to manage LPB pack which is connected with CAN(Controller Area Network) each other and measure the voltage, current, temperature and also control the cooling fan inside of LPB pack. Using the measured data, BMS can show the SOC(State of Charge), SOH(State of Health) and other status of LPB pack including of the cell balancing.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.477-477
• /
• 2009

Bimodal Tram developed by KRRI is driven by a series Hybrid propulsion system which has both the CNG engine, generator and LPB(Lithium Polymer Battery) pack. It has three driving modes; Hybrid mode, Engine mode and Battery mode. Even in case of Battery mode, LPB pack to get enough power to drive the vehicle only by itself onsists of 168 LPB cells(80Ah per lcell), 650V. It is important thing to manage LPB pack in a right way, which will extend the lifetime of LPB cells and operate in the hybrid mode effectively. This paper has shown the development of battery management system(12 BMS, 1 BMS per 14cells) to manage LPB pack which is connected with CAN(Controller Area Network) each other and measure the voltage, current, temperature and also control the cooling fan inside of LPB pack. Using the measured data, BMS can show the SOC(State of Charge), SOH(State of Health) and other status of LPB pack including of the cell balancing.

• Journal of the Korean Electrochemical Society
• /
• v.15 no.3
• /
• pp.115-123
• /
• 2012

As the market of lithium secondary batteries moves from mobile IT devices to large-format electric vehicles or energy storage systems, the strengthened battery specifications such as long-term reliability longer than 10 years, pack-level safety and tough competitive price have been required. Moreover, even though high power properties should also be achieved for hybrid electric vehicles, it is not easy to measure accurate power values at various conditions. Because it is difficult to choose a proper measurement method and its experimental condition is more complex comparing to capacity measurement. In addition, the power values are very sensitive to power duration time, state-of-charge (SOC) of cells, cut-off voltages, and temperatures, whereas capacity values are not. In this paper, we introduce three kinds of power measurement methods, hybrid pulse power characterization (HPPC) suggested by US FreedomCar, so-called J-pulse by Japan electric vehicle association standards (JEVS) and constant power measurement, respectively. Moreover, with pouch-type unit cells for HEV, experimental power data are discussed in order to compare each power measurement.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.11
• /
• pp.1603-1611
• /
• 2021

As IMO environmental regulations are tightened, the need to establish a system that can reduce emissions is increasing, and for this purpose, various power control management systems have been studied and implemented as a new energy management system for ships. In this study, we design a control process through modeling for Bi-Directional Converter (BDC) application with bi-directional power flow to link batteries, which are energy storage devices, to conventional generator power systems, and propose mechanisms for batteries optimized for varying loads. This work models MATLAB/Simulink as a BDC and simulates current control and state of charge (SOC) optimization at the time of charging and discharging batteries according to load scenarios. Through this, the battery, power, and load were interlocked so that the generator operated on board could be operated in the optimal operation range, and power control management was performed to enable the generator to operate in the high fuel efficiency range.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.4
• /
• pp.472-478
• /
• 2022

Solar energy harvesting is practiced by various nations for the purpose of energy security and environment preservation in order to reduce overdependence on oil. Converting solar energy into electrical energy through Photovoltaic (PV) module can take place either in on-grid or off-grid applications. In recent time Lithium battery is exhibiting its presence in on-grid applications but its role in off-grid application is rarely discussed in the literature. The preliminary capacity and Peukert's study indicated that the battery quality is good and can be subjected for life cycle test. The capacity of the battery was 10.82 Ah at 1 A discharge current and the slope of 1.0117 in the Peukert's study indicated the reaction is very fast and independent on rate of discharge. In this study Lithium Iron Phosphate battery (LFP) after initial characterization was subjected to life cycle test which is specific to solar off-grid application as defined in IEC standard. The battery has delivered just 6 endurance units at room temperature before its capacity reached 75% of rated value. The low life of LFP battery in off-grid application is discussed based on State of Charge (SOC) operating window. The battery was operated both in high and low SOC's in off-grid application and both are detrimental to life of lithium battery. High SOC operation resulted in cell-to-cell variation and low SOC operation resulted in lithium plating on negative electrode. It is suggested that to make it more suitable for off-grid applications the battery by default has to be overdesigned by nearly 40% of its rated capacity.