• Journal of the Korean Society of Radiology
• /
• v.9 no.5
• /
• pp.279-285
• /
• 2015

The eye of human is a radiation sensitive organ and this organ should be shielded from radiation exposure during brain CT procedures. In the brain CT procedures, bismuth protector using to reduce the radiation exposure dose for eye. But protecting the bismuth always accompanies problem of the image quality reduction including artifact. This study aim is the eye radiation exposure dose and image quality evaluation of the new tube current modulation such as new organ based-tube current modulation, longitudinal-TCM, angular-TCM between shielding scan technique using bismuth and lead glasses. As a result, radiation dose of eye is reduced 25.88% in new OB TCM technique then reference scan technique and SNR new OB TCM is 6.05 higher than bismuth shielding scan technique and lower than reference scan technique. In clinical brain CT, new OB TCM technique will contribute to reduction of radiation dose for eye without decrease of image quality.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.1
• /
• pp.41-45
• /
• 1985

A degradation of the signal-to-noise ratio (SNR) in a digital moving target indicator system (DMTI System) can be Improved by weighting of the DMTI output pulses before the integration process. and it Is shown that the signal-to-noise ratio Is unproved as the nunlber of delay line cancellers. It is Known that signal-to-noise ratio obtained with optimum weighting is greater than that obtained with binomial weighting. An improvement performance of the signal-to-noise ratio for each case is presented through the results or a computter simulation.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.6
• /
• pp.19-25
• /
• 2009

The performance of a cognitive radio system with cooperative diversity which includes the direct and indirect path is analysed. The selection relay cooperation which selects the best relay, the relay with the best received signal-to-noise ratio(SNR) in destination node, is considered and derived the performance degradation caused by the CSI(Channel State Information) delay analytically. Numerical examples show that the cooperative diversity which have the direct and the indirect paths effectively improves the system performance in Rayleigh fading; the performance improves 4.4 dB with 1/10 of SNR of the indirect path. And the system performance is more degraded with the less frequency acquisition probability and with the high CSI delay.

• Journal of IKEEE
• /
• v.15 no.1
• /
• pp.64-69
• /
• 2011

In this paper, a semi-analytical approach is proposed for decode-and-forward(DF) relay systems over rayleigh fading channels. At first, we derive the general form of the averaged bit error rate(BER) based on error-events at relay nodes in which a selection scheme is not used. It is confirmed that an erroneous detection and transmission at relay nodes can cause the degradation of the received signal-to-noise ratio (SNR) and the averaged BER performance. Furthermore, the proposed method can be extended to selective-DF(SDF) relay schemes so that it is verified to be another general solution for DF relay systems. Also, proposed semi-analytical expressions have been verified by comparing with simulations.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.5 no.1 s.9
• /
• pp.45-54
• /
• 2006

The UWB signal distortion in frequency selective channel has made it difficult to implement the channel estimator and the synchronizer of the UWB receiver. In this paper, we examine the performances of TR(Transmitted Reference) and DTR(Differential TR) UWB which use either reference pulse or differential method to estimate the channels. we also propose a FSK-based PRM(Pulse Repetition Modulation) UWB system as an another form of UWB system which is advantageous in frequency selective channel. Finally, resorting to statistical analysis, we examine the noise effect due to noisy reference at an auto-correlation(AcR) receiver. moreover, SNR dependance of the integration length in the AcR receiver is also investigated.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2261-2266
• /
• 2011

Being the most widely used in ultrasound Doppler color flow mapping, the Kasai algorithm, also known as lag-1 autocorrelation method, is capable of estimating the Doppler mean frequency relatively accurately with a modest amount of computation. Particularly in the case of imaging deep lying areas, however, its performance suffers due to low signal-to-noise ratios. The purpose of this paper is to propose a dealiased lag-2 autocorrelation method which is superior to the Kasai algorithm even at low signal-to-noise ratios and to compare their performances through simulations. The proposed algorithm is found to be better by about 2 to 3 dB than the Kasai algorithm in terms of Doppler mean frequency estimation error in the presence of measurement noise.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.5
• /
• pp.881-888
• /
• 2020

In this paper, in order to improve the degraded BER performance of the stronger channel user in non-orthogonal multiple access(: NOMA) with interactive mobile users, we propose the negative correlation bit-to-symbol(: B2S) mapping. First, the closed-form expression for the BER of the negative correlation B2S mapping receiver is derived, and then it is shown that the BER of the negative correlation B2S mapping receiver is improved, compared with those of the ideal perfect successive interference cancellation(: SIC) receiver and positive correlation receiver. Additionally, based on the analytical expression, signal-to-noise(: SNR) gain is calculated, and the superiority of the negative correlation B2S mapping receiver is validated.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.280-286
• /
• 2013

In this paper, a noise reduction system is proposed for the speech interface in intelligent TV applications. To reduce TV speaker sound which are very serious noises degrading recognition performance, a noise reduction algorithm utilizing the direct TV sound as the reference noise input is implemented. In the proposed algorithm, transfer functions are estimated to compensate for the difference between the direct TV sound and that recorded with the microphone installed on the TV frame. Then, the noise power spectrum in the received signal is calculated to perform Wiener filter-based noise cancellation. Additionally, a postprocessing step is applied to reduce remaining noises. Experimental results show that the proposed algorithm shows 88% recognition rate for isolated Korean words at 5 dB input SNR.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.9A
• /
• pp.678-683
• /
• 2003

The pseudo-noise (PN) code acquisition based on the sequential estimation (SE) proposed by Ward performs well only at relatively high chip signal-to-noise ratios (SNRs). In this paper, a seed accumulating sequential estimation (SASE) method and a PN code acquisition system based on it are proposed, which perform well at low chip SNR (of practical interest) also. Then, the mean acquisition time performance of the proposed system is investigated. Numerical results show that the system based on the SASE performs dramatically better than that based on the SE at low chip SNR, and the improvement becomes larger as the period of PN code increases.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.7
• /
• pp.79-84
• /
• 2013

In this paper, the method of multiple PS(pilot symbol) QAM channel compensation is suggested in order to analyze and improve occurring problems in case of delay waves in Frequency-Selective Rayleigh fading channels through Pilot Symbol Assisted Modulation(PSAM) which is a method predicting and compensating fading information, using Pilot Symbol in flat fading channels. This suggested method shows stable improvement in its performance even though it is effected by the level of delay on delay waves while the existing PSAM method has severe malfunction with a small amount of level of delay on delay waves regardless of signal-to-noise ratio(SNR).