• Title/Summary/Keyword: SNC

Search Result 47, Processing Time 0.023 seconds

A Study on the Effect of Heat-treatment on the Fatigue Strength of SNC815 Spur Gears (SNC815 기어의 피로강도에 미치는 열처리 효과에 관한 연구)

  • Lyu, Sung-Ki;Nam, Tae-Hyun;Lee, Jin-Yi
    • Journal of the Korean Society for Heat Treatment
    • /
    • v.13 no.1
    • /
    • pp.21-26
    • /
    • 2000
  • This study deals with effects of heat-treatment on the fatigue strength of SNC815 spur gears. The test gears are heat-treated by two different treatments. After carburization, one group of the test gears is quenched directly, while the other group is fumace cooled, reheated then quenched. The fatigue test at a constant stress amplitude is performed by using an electrohydraulic servo-controlled pulsating tester. The S-N curves are obtained and illustrated. By comparing the estimated strength with the experimental results, the validity of the previous experimental formula, presented by the author for estimating the fatigue strength of carburized gears, was discussed on these tested gears.

  • PDF

Real-Time Implementation of On-Line Trained Neuro-Controller for a BLDC Motor

  • Salem, M.M.;Zahran, M.B.;Atia, Yousry;Zaki, A.M.
    • Journal of Power Electronics
    • /
    • v.3 no.1
    • /
    • pp.10-16
    • /
    • 2003
  • Implementation and experimental verification of a simple neuro-controller (SNC) as a speed controller for a brush less DC (BLDC) motor is presented. The SNC with one weight and a linear hard limit activation function is trained on-line using the back propagation algorithm. A modified error function is used to ensure good performance during the on-line training, which has been used without previous off-line training. The SNC has been implemented using a computer-interface card mounted on a PC. The driving system performance has been investigated by a number of experimental tests for a variety of input reference speed trajectories.

Content Modeling Based on Social Network Community Activity

  • Kim, Kyung-Rog;Moon, Nammee
    • Journal of Information Processing Systems
    • /
    • v.10 no.2
    • /
    • pp.271-282
    • /
    • 2014
  • The advancement of knowledge society has enabled the social network community (SNC) to be perceived as another space for learning where individuals produce, share, and apply content in self-directed ways. The content generated within social networks provides information of value for the participants in real time. Thus, this study proposes the social network community activity-based content model (SoACo Model), which takes SNC-based activities and embodies them within learning objects. The SoACo Model consists of content objects, aggregation levels, and information models. Content objects are composed of relationship-building elements, including real-time, changeable activities such as making friends, and participation-activity elements such as "Liking" specific content. Aggregation levels apply one of three granularity levels considering the reusability of elements: activity assets, real-time, changeable learning objects, and content. The SoACo Model is meaningful because it transforms SNC-based activities into learning objects for learning and teaching activities and applies to learning management systems since they organize activities -- such as tweets from Twitter -- depending on the teacher's intention.

Effects of Heat-treatment on the Bending Fatigue Strength of SNC 815 Carburized Spur Gear (SNC 815 침탄치차의 굽힘피로강돈에 미치는 열처리법의 영향)

  • Lyu, Sung-Ki
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.11 no.6
    • /
    • pp.12-19
    • /
    • 1994
  • This paper deals with the bending fatigue strength of SNC815 carburized spur gears. The test gears are heat-treated by two different treatments. One is the direct quenching after car-burization. The other is treated by reheating and quenching. The fatigue test at a constant stress amplitude is performed by using an electrohydraulic servo-controlled pulsating tester. The S-N curves are obtained and illustrated. The fatigue strength of direct quenched gears is higher than that of reheated quenched gears. The fatigue strength is estimated from the hardness and the residual stress by using the experimental formula proposed by Tobe and Inoue. The estimated strength is close to the test results, and the validty of the formular is confirmed.

  • PDF

Effects of Fetal Mesencephalic Cell Grafts on the Intrastriatal 6-hydroxydoapmine Lesioned Rats

  • Joo, Wan Seok;Nam, Eun-Joo;Im, Heh-ln;Jung, Jin-Ah;Lee, Eun-Sun;Hwang, Yu-Jin;Kim, Yong-Sik
    • The Korean Journal of Physiology and Pharmacology
    • /
    • v.8 no.5
    • /
    • pp.245-251
    • /
    • 2004
  • The effects of fetal mesencephalic cell grafts on the restoration of nigrostriatal dopaminergic function were studied in the intrastriatal 6-hydroxydopamine-lesioned rats. Four weeks after lesioning, transplantation of ventral mesencephalic cells from embryonic day 14 fetuses showed the number of tyrosine hydroxylase (TH) positive cells and fiber outgrowth in the grafted striatum, and significantly ameliorated symptomatic motor behavior of the animals, as determined by apomorphine-induced rotation. Furthermore, in substantia nigra pars compacta (SNc), the numbers of TH + cells and fibers were markedly restored. Dopamine content of ipsilateral SNc was close to that of contralateral SNc $(91.9{\pm}9.8%)$ in the transplanted animals, while the ratio was approximately 32% in sham-grafted animals. These results indicate that grafted cells restored the activity for the dopaminergic neurons located in SNc, although they were transplanted into striatum. In addition, we showed that the implanted fetal cells expressed high level of glial cell line-derived neurotrophic factor (GDNF), suggesting that the transplanted fetal cells might serve as a dopamine producer and a reservoir of neurotrophic factors. These results may be helpful in consideration of the therapeutic transplantation at early stage of PD.

Compensation for The Solar Radiation Effect of Radiosonde's Temperature Sensor Using Solar Panel (솔라패널을 이용한 라디오존데 온도센서의 일사보정)

  • Park, Myeong-Seok;Lee, Jin-Wook;Jeung, Se-Jin;Jang, Jea-Won
    • Atmosphere
    • /
    • v.29 no.3
    • /
    • pp.283-294
    • /
    • 2019
  • For the upper air observations, a temperature measurement using radiosonde is a common method, and the compensation of solar radiation effects in the radiosonde temperature sensor is an important factor. In this paper, we present various experiments and compensation methods of the radiosonde temperature sensor to overcome the errors caused by the movement of the radiosonde rotation, etc. The methods and procedures of this study are as follows. First, we used the solar simulator to analyze the temperature variation and solar effect of the temperature sensor in the radiosonde according to the insolation. We also analyzed the temperature variation and solar effect of the temperature sensor according to the incident angle between the solar simulator and radiosonde. Second, we measured and analyzed solar radiation absorbed by solar cells attached to radiosonde. Third, we present combined compensate solution of the first and the second experiment results, to overcome errors caused by insolation effects in the radiosonde temperature sensors. Fourth, we compared that the reference temperature in similar environment with the upper air conditions, to verify the new radiated compensation performance of the radiosonde temperature sensor. Finally, the radiosonde fabricated in this study was raised to the atmosphere, and the laser correction algorithm proposed through experiments was reviewed. As a result of the radiosonde SRS-10 produced in this study, the temperature deviation from Vaisala RS92 was $0.057^{\circ}C$ in nighttime observation, $0.17^{\circ}C$ in daytime observation, It is expected that the GRUAN under WMO will be able to obtain a high test rating of 5.0.

Change in Curl of Newsprint by Physical Treatments - Effects of roll diameter, storage time, winding methods, calendering and humidity on curl - (물리적 처리에 의한 신문용지의 컬 변화 -권취롤의 직경, 저장 기간, 권취 방법, 캘린더링 및 습도의 영향-)

  • Lim, Yeon-Ju;Paik, Ki-Hyon
    • Journal of Korea Technical Association of The Pulp and Paper Industry
    • /
    • v.36 no.3
    • /
    • pp.60-66
    • /
    • 2004
  • The effects of roll diameter, winding time, winding methods and relative humidity on curl In newsprints(46$g/m^2$, 54 $g/m^2$, and 54 $g/m^2$ SNC) are examined. The larger MD curl appears at smaller roll diameter, with the extension of winding time, and at the treat ment of soft nip calendering. The MD curl shows the back side curl at winding methods with top side as outer side(TSO), and the top side curl with top side as inner side(TSI). While the CD curl in newsprints( 46 $g/m^2$, and 54 $g/m^2$ SNC) treated with calender is hardly influenced by the storage times, roll diameter, and winding methods. However the CD curl in newsprint(54 $g/m^2$) gradually increases to a two weeks, and then hold constant regardless of roll diameter and winding methods.. The CD curl shows always the top side curl regardless of winding methods. At high relative humidity, the CD curl largely reduces, but the MD curl is not nearly changed. Especially, the CD curl in news-prints(54 $g/m^2$ SNC) is little affected by the changes of relative humidity.

Mineral Contents of Hot Water Extracts and Shell of Shellfishes from Western Coast of Korea (서해안 조개류의 껍질과 열수 추출물의 무기질 함량)

  • 김미정;이예경;김순동
    • Journal of the East Asian Society of Dietary Life
    • /
    • v.11 no.4
    • /
    • pp.289-294
    • /
    • 2001
  • Yields of shells, appearance of the shellfishes, mineral contents of the shells and their hot water extracts were determined in six shellfishes such as corb shell(CS). short neck clam(SNC). taste clam(TC), ark shell(AS). top shell(TS) and oyster(OY) from the western coast of Korea. Yields of shells in shellfishes were 70.I~80.5% but yields of TC was the lowest as 40.7%. The highest among weight of the shell the shellfishes was the TS(26.2g) and the lowest weight was TC(5.6g) Colors of CS, SNC, TC. AS. TS and OY were yellowish brown, brown, black. greenish brown and gray. respectively. Ca content of the shell of shellfishes was 36.23~38.78% and the content of K and Na were 0.23~4.54% and 1.48~l.59%, respectively. Contents of Na, Mg, Fe. Mn, Zn, Cu. P and S were in the range of 0.01~0.21%. It also contained heavy metals, such as Pb(1.90~7.75 ppm), Cd(0.5~4.50 ppm), As (1.40~4.30 ppm), Se (0.2~l.50 ppm). Cr(1.00~8.30 ppm) and Hg(0.002~8.2 ppm), Ca content in hot water extracts of shell of shellfish was the highest in TC(2,448 mg/100 g), and the lowest in SNC(115 mg/100 g). K content in TC extracts was the highest with the levels of 952 mg/100 g. P content of TC and SNC were 201 and 0.36 mg/100 g, respectively. The contents of Pb, As, Se and Cr were the highest in the extracts of TC and were 110. 40. 90, 20 $\mu$g/100 g, respectively. But Cd was not detected in the extracts of SNC.

  • PDF

Production of Extracellular Water Insoluble ${\beta}-1,3-Glucan$ (Curdlan) from Bacillus sp. SNC07

  • Gummadi, Sathyanarayana N.;Kumar, Kislay
    • Biotechnology and Bioprocess Engineering:BBE
    • /
    • v.10 no.6
    • /
    • pp.546-551
    • /
    • 2005
  • [ ${\beta}-1,3-Glucan$ ] (curdlan) is a water-insoluble polysaccharide composed exclusively of ${\beta}-1,3\;linked$ glucose residues. Extracellular curdlan was mostly synthesized by Agrobacterium species and Alcaligenes faecalis under nitrogen-limiting conditions. In this study, we screened the microorganisms capable of producing extracellular curdlan from soil samples. For the first time, we reported Gram-positive bacterium Bacillus sp. SNC 107 capable of producing extracellular curdlan in appreciable amounts. The effect of different carbon sources on curdlan production was studied and found that the yield of curdlan was more when glucose was used as carbon source. It was also found that maximum production was achieved when the initial concentration of ammonium and phosphate in the medium was 0.5 and 1.9 g/L respectively. In this study the curdlan production was increased from 3 to 7g/L in shake flask cultures.

Wind spectral characteristics on strength design of floating offshore wind turbines

  • Udoh, Ikpoto E.;Zou, Jun
    • Ocean Systems Engineering
    • /
    • v.8 no.3
    • /
    • pp.281-312
    • /
    • 2018
  • Characteristics of a turbulence wind model control the magnitude and frequency distribution of wind loading on floating offshore wind turbines (FOWTs), and an in-depth understanding of how wind spectral characteristics affect the responses, and ultimately the design cost of system components, is in shortage in the offshore wind industry. Wind spectrum models as well as turbulence intensity curves recommended by the International Electrotechnical Commission (IEC) have characteristics derived from land-based sites, and have been widely adopted in offshore wind projects (in the absence of site-specific offshore data) without sufficient assessment of design implications. In this paper, effects of wind spectra and turbulence intensities on the strength or extreme responses of a 5 MW floating offshore wind turbine are investigated. The impact of different wind spectral parameters on the extreme blade loads, nacelle accelerations, towertop motions, towerbase loads, platform motions and accelerations, and mooring line tensions are presented and discussed. Results highlight the need to consider the appropriateness of a wind spectral model implemented in the strength design of FOWT structures.