• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.4 s.37
• /
• pp.307-313
• /
• 2005

Electromigration behavior in the Sn96.5Ag3.0Cu0.5 solder lines was investigated and compared Sn96.5Ag3.0Cu0.5 with eutectic SnPb. Measurements were made for relevant parameters for electromigration of the solder, such as drift velocity, threshold current density, activation energy, as well as the product of diffusivity and effective charge number (DZ$\ast$). The threshold current density were measured to be $2.38{\times}10^4A/cm^2$ at $140^{\circ}C$ and the value represented the maximum current density which the SnAgCu solder can carry without electromigration damage at the stressing temperatures. The electromigration energy was measured to 0.56 eV in the temperature range of $110-160^{\circ}C$. The measured products of diffusivity and the effective charge number, DZ$\ast$ were $3.12{\times}10^{-10} cm^2/s$ at $110^{\circ}C$, $4.66{\times}10^{-10} cm^2/s$ at $125^{\circ}C$, $8.76{\times}10^{-10} cm^2/s$ at $140^{\circ}C$, $2.14{\times}10^{-9}cm^2/s$ at $160^{\circ}C$ SnPb solder existed incubation stage, while SnAgCu did not have incubation stage. It was thought that the diffusion mechanism of SnAgCu was different from that of SnPb.

• Journal of the Korean Society of Industry Convergence
• /
• v.4 no.4
• /
• pp.451-455
• /
• 2001

The epitaxial growth of Ge on the clean and surfactant(Sn) adsorbed surface of Ge(111) was studied by the intensity oscillation of a RHEED specular spot. In the case of epitaxial growth without the adsorbed surfactant, the RHEED intensity oscillation was stable and periodic up to 24ML at the substrate temperature of $200^{\circ}C$. Therefore the optimum temperature for the epitaxial growth of Ge on clean Ge(111) seems to be $200^{\circ}C$. However, in the case of epitaxial growth with the adsorbed surfactant, the irregular oscillations are observed in the early stage of the growth. The RHEED intensity oscillation was very stable and periodic up to 38ML, and the $d2{\times}2$ structure was not charged with continued adsorption of Ge at the substrate temperature of $200^{\circ}C$. These results may be explained by the fact that the diffusion length of Ge atoms is increased by decreasing the activation energy of the Ge surface diffusion, resulted by segregation of Sn toward the growing surface. From the desorption process, the desorption energy of Sn in Ge $\sqrt{5}{\times}\sqrt{5}$ structure is observed to be 3.28eV.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.998-1001
• /
• 2004

ZnO, $SnO_2$ 타겟 각각의 RF 파워를 50 W, 38 W로 고정시킨 후 combinatorial RF magnetron sputtering법을 사용하여 기판 위치에 따라서 조성 구배를 주어 여러 가지 조성의 Zn-Sn-O(ZTO) 박막을 제작하였다. 시편의 열처리에 따른 물성 변화를 분석하기 위해 Rapid Thermal Annealer(RTA)을 이용하여 450, $650{^\circ}C$의 온도 및 $10^{-2}$ Ton의 진공 분위기에서 각각 1 시간 동안 열처리하였다. XRD 분석 결과 상온에서 제작된 ZTO 박막은 Sn 18 at%의 조성을 갖는 시편을 제외하고 모두 비정질상으로 나타났다. $450^{\circ}C$에서 열처리 후 구조적인 변화는 보이지 않았으나, 캐리어 농도와 이동도는 증가하였으며 Sn 54 at%의 조성에서 최고 $25.4cm^2/Vsec$의 전자 이동도를 나타내었다. $26{\leq}Sn$ $at%{\leq}65$의 조성 범위를 갖는 박막은 가시광 영역에서 80 % 이상의 투과도를 가졌으며 $650^{\circ}C$에서 결정화가 되면서 투과도가 증가하였다.

• ETRI Journal
• /
• v.38 no.6
• /
• pp.1163-1171
• /
• 2016

Integration technologies involving flexible substrates are receiving significant attention owing the appearance of new products regarding wearable and Internet of Things technologies. There has been a continuous demand from the industry for a reliable bonding method applicable to a low-temperature process and flexible substrates. Up to now, however, an anisotropic conductive film (ACF) has been predominantly used in applications involving flexible substrates; we therefore suggest low-temperature lead-free soldering and bonding processes as a possible alternative for flex-on-flex applications. Test vehicles were designed on polyimide flexible substrates (FPCBs) to measure the contact resistances. Solder bumping was carried out using a solder-on-pad process with Solder Bump Maker based on Sn58Bi for low-temperature applications. In addition, thermocompression bonding of FPCBs was successfully demonstrated within the temperature of $150^{\circ}C$ using a newly developed fluxing underfill material with fluxing and curing capabilities at low temperature. The same FPCBs were bonded using commercially available ACFs in order to compare the joint properties with those of a joint formed using solder and an underfill. Both of the interconnections formed with Sn58Bi and ACF were examined through a contact resistance measurement, an $85^{\circ}C$ and 85% reliability test, and an SEM cross-sectional analysis.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.45.1-45.1
• /
• 2013

Type Ia supernovae (SNe Ia) are a powerful tool to investigate the expansion history of the universe, because their peak luminosity is as bright as a galaxy and is known as an excellent standard candle. Since the discovery of the acceleration of the universe based on the observations of SNe Ia, higher than ever accuracy of their peak luminosity is needed to investigate various problems in cosmology. We started a project to improve the accuracy of the calibration of the peak luminosity of SNe Ia by measuring accurate distances to nearby resolved galaxies that host SNe Ia. We derive accurate distances to the SN Ia host galaxies using the method to measure the luminosity of the tip of the red giant branch (TRGB). In this study we present the results for M66 and M96 in the Leo I Group which are nearby spiral galaxies hosting SN 1989B and SN 1998bu, respectively. We obtain VI photometry of resolved stars in these galaxies from F555W and F814W images in the Hubble Space Telescope archive. We derive the distances to these galaxies from the luminosity of the TRGB. With these results we derive absolute maximum magnitudes of two SNe (SN 1989B in M66 and SN 1998bu in M96). We derive a value of the Hubble constant from the optical magnitudes of these SNe Ia and SN 2011fe in M101 based on our TRGB analysis. This value is similar to the values derived from recent estimates from WMAP9 and Planck results, but smaller than other recent determinations based on Cepheid calibration for SNe Ia luminosity.

• Journal of the Korean Ceramic Society
• /
• v.38 no.12
• /
• pp.1180-1186
• /
• 2001

W $O_3$-Sn $O_2$thin film sensors with approximately 1${\mu}{\textrm}{m}$ in thickness were fabricated by using a high-vacuum resistance-heating evaporator, were annealed at 50$0^{\circ}C$ for 4 hours in air, and then their crystallinities and surface microstructures were analyzed. As results of gas-sensing characteristics to oxidizing gas, N $O_2$, and reducing gas, CO, of 100 ppm, the highest gas sensitivities (S= $R_{gas}$/ $R_{air}$) were the W $O_3$thin-film sensor measured at 25$0^{\circ}C$ for N $O_2$(S≒1000) and the Sn $O_2$thin-film sensor measured at 15$0^{\circ}C$ to 25$0^{\circ}C$ range for CO (S≒0.25), respectively.ely.

• Current Photovoltaic Research
• /
• v.10 no.2
• /
• pp.33-38
• /
• 2022

Planner configuration thin film solar cells (TFSCs) with SnS/CdS heterojunction performed a lower short-circuit current (J_SC). In this study, we have demonstrated a path to overcome deficiency in J_SC by the incorporation of Se in the SnS absorber. We carried out the incorporation of Se in VTD grown SnS absorber by rapid thermal annealing (RTA). The diffusion of Se is mostly governed by RTA temperature (T_RTA), also it is observed that film structure changes from cube-like to plate-like structure with T_RTA. The maximum J_SC of 23.1 mA cm^-2 was observed for 400℃ with an open-circuit voltage (V_OC) of 0.140 V for the same temperature. The highest performance of 2.21% with J_SC of 18.6 mA cm^-2, V_OC of 0.290 V, and fill factor (FF) of 40.9% is observed for a T_RTA of 300℃. In the end, we compare the device performance of Se- incorporated SnS absorber with pristine SnS absorber material, increment in J_SC is approximately 80% while a loss in V_OC of about 20% has been observed.

• Reproductive and Developmental Biology
• /
• v.35 no.4
• /
• pp.469-473
• /
• 2011

These study was carried out to investigate the effects of the supplementation with sodium nitroprusside (SN) and nitric oxide (NO) of canine oocytes on IVM rates. Oocytes were incubated in TCM-199 supplement with at 0.03~0.10 mM SN and 0.3~1.0 mM NO for 48 hrs. Oocytes were transferred to 50 ul drops of maturation medium covered mineral oil and cultured in a $CO_2$ incubator (5% $CO_2$, 95% air, $38^{\circ}C$). The in vitro maturation rate of oocytes cultured for 48 hrs in TCM-199 medium supplement with 0.03, 0.05, 0.07, 0.10 mM SN were $25.9{\pm}3.5%$, $36.4{\pm}3.2%$, $33.3{\pm}3.5%$, $28.8{\m}3.2%$, respectively. The in vitro maturation rate of oocytes cultured for 48 hrs in TCM-199 medium supplement with 0.03~0.07 mM SN were significantly increased compare to the control ($26.0{\pm}2.2%$). The in vitro maturation rates of oocytes cultured for 48 hrs in TCM-199 medium supplement with 0.3, 0.5, 0.7, 1.0 mM NO were $28.0{\pm}4.2%$, $36.5{\pm}3.6%$, $30.0{\pm}3.8%$, $19.2{\pm}3.5%$, respectively. The in vitro maturation rate of oocytes in TCM-199 medium supplemented with 0.3 and 0.5 mM NO were significantly increased compare to the control ($26.0{\pm}2.2%$). The in vitro maturation rates of oocytes cultured for 12~48 hrs in TCM-199 medium supplement with 0.05 mM SN were $26.0{\pm}3.2%$, $28.0{\pm}3.4%$, $38.0{\pm}3.2%$, respectively. The in vitro maturation rate of oocytes cultured for 12~48 hrs in TCM-199 medium supplement with 0.5 mM NO were $22.0{\pm}3.0%$, $30.0{\pm}3.8%$, $36.0{\pm}4.2%$, respectively. These result was significantly increased compare to the control.

• Journal of Korean Ophthalmic Optics Society
• /
• v.11 no.3
• /
• pp.259-265
• /
• 2006

We polymerized material of AA(Acrylic acid) and BMA(butyl methacrylate) to make up for the weak points of hydrogel contact lens. The synthesis process of silicone synthesis is as follows. Acrylate-PDMS(Polydimethylsiloxane)-Urethane prepolymer was composed after Diisocynate reacted with HEMA(2-hydroxyethylmethacrylate) under the catalyst and it reacted again with bis(hydroxyalkyl) terminated poly(dimethylsiloxane) with high oxygen transmissibility characteristics. HEMA(2-hydroxyethylmethacrylate) was used to make prepolymer that can be polymerized and the urethane was used to improve elasticity and oxygen transmissibility, copolymerization was performed with conventional hydrogel contact lens materials to make silicone hydrogel contact lens with higher oxygen transmissibility. For manufacturing of contact lens, We added BMA(Butyl methacrylate) with better elasticity and flexibility, and AA(Acrylic acid) with higher moisturizing to used contact lens materials. AIBN (Azobis2-methylpropionitrile) as initiator and EGDMA(Ethylene Glycol Dimethacrylat) as crosslinking agent were used and the lens with higher oxygen transmissibility and better moisturizing were manufactured complying with basic contact lens properties, which have several combination trial of each monomer characteristics. Compounding SN which included SILICONE, HEMA, NVP and EGDMA etc was showed by swelling ratio of 9.38% and water content of 23.7%. SN was showed by swelling ratio of 9.38%, water content of 23.7% and a visible ray transmissibility of 89%. SB which added BMA in the SN was showed by swelling ratio of 12.50%, water content of 18.56% and a visible ray transmissibility of 88%. SAB which added both AA and BMA in the SN was showed by swelling ratio of 8.33%, water content of 12.93% and a visible ray transmissibility of 88%.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.9
• /
• pp.1256-1264
• /
• 2011

Infant formula is one of the main nutritional sources for infants. In this study, the fatty acid compositions of Korean (domestic, n=8) and foreign infant formulas (n=3) were analyzed. Crude fats were extracted using the Folch method, and fatty acid compositions (total and positional) were analyzed by gas chromatography. In the fatty acid compositions of infant formulas, oleic (19.88~44.64%), palmitic (7.59~21.65%) and linoleic acids (16.72~25.87%) were the major fatty acids. Domestic infant formula products contained 35.94~56.55% total saturated fatty acid content, whereas that of foreign infant formula ranged from 34.40~42.88%. The content of monounsaturated fatty acids ranged from 20.23~44.99% in domestic products and 34.11~45.07% in foreign products. In addition, 0.17~2.57% arachidonic acid/docosahexaenoic acid and 10~13% linoleic acid/linolenic acid were detected in the analyzed products (domestic and foreign products). A small amount of trans fatty acids (0.25~1.69%) were found. In sn-2 position analysis, palmitic acids (1.84~38.74%) were detected in the analyzed formulas. Further, typical triacylglycerols in human milk, including 1,3-di-monounsaturated-2-saturated triacylglycerol, were not detected in the analyzed formulas.