• Nuclear Engineering and Technology
• /
• 제56권3호
• /
• pp.1066-1080
• /
• 2024

SMART100 has a containment pressure and radioactivity suppression system (CPRSS) for passive containment cooling system (PCCS). This prevents overheating and over-pressurization of a containment through direct contact condensation in an in-containment refueling water storage tank (IRWST) and wall condensation in a CPRSS heat exchanger (CHX) in an emergency cool-down tank (ECT). The Korea Atomic Energy Research Institute (KAERI) constructed scaled-down test facilities, SISTA1 and SISTA2, for the thermal-hydraulic validation of the SMART100 CPRSS. Three separate effect tests were performed using SISTA1 to confirm the heat removal characteristics of SMART100 CPRSS. When the low mass flux steam with or without non-condensable gas is released into an IRWST, the conditions for mitigation of the chugging phenomenon were identified, and the physical variables were quantified by the 3D reconstruction method. The local behavior of the non-condensable gas was measured after condensation inside heat exchanger using a traverse system. Stratification of non-condensable gas occurred in large tank of the natural circulation loop. SISTA2 was used to simulate a small break loss-of-coolant accident (SBLCOA) transient. Since the test apparatus was a metal tank, compensations of initial heat transfer to the material and effect of heat loss during long-term operation were important for simulating cooling performance of SMART100 CPRSS. The pressure of SMART100 CPRSS was maintained below the design limit for 3 days even under sufficiently conservative conditions of an SBLOCA transient.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 추계학술대회 논문집
• /
• pp.117-118
• /
• 2014

This paper presents a new smart power module for 100[kVA] inverter. In the inverter, the three smart modules are used and those are installed at the each pole of the inverter. Each module receives the switching functions from the inverter main controller, and generates duty ratio for IGBTs' switching of the pole. For the reliable operation of the inverter, CAN communication is used for transferring the switching functions form the main controller to the modules. Experiments verify the performance of the smart power module installed in 100[KVA] inverter.

• 전기저널
• /
• 통권421호
• /
• pp.100-101
• /
• 2012

• 대한교통학회지
• /
• 제32권5호
• /
• pp.473-486
• /
• 2014

본 연구는 SMART Highway에서 종단선형에 따른 표준트럭의 교통영향을 분석하여 오르막차로 설치 필요성을 검토하고 오르막차로 필요 시 경사길이에 따른 속도변화 곡선을 구하여 제시하는 것을 목적으로 한다. SMART Highway는 미래 고속도로이므로 표준트럭의 실제 주행실험이 불가능하여 VISSIM 시뮬레이션 모형을 이용하여 오르막구간에서 표준트럭의 속도변화를 구하였다. 오르막차로의 표준트럭은 100kg/kW(170lb/hp)로 결정하고 진입속도는 장래 여건을 고려하여 90, 100, 110km/h로 설정하였다. 본 연구결과는 SMART Highway 환경하에서 종단선형 1, 2%에서 오르막차로는 필요하지 않고 3%의 오르막구간에서만 설치 필요성이 있음을 제시하였다. 3% 종단선형에서 오르막차로를 설치하기 위해 진입속도 90, 100, 110km/h에서 경사길이에 따른 트럭의 속도변화 곡선을 제시하였고 오르막차로 설치 위치도 제시하였다.

• 한국해양공학회지
• /
• 제35권4호
• /
• pp.266-272
• /
• 2021

Mooring systems are among the most important elements employed to control the motion of floating offshore structures on the sea. Considering the use of polymer material, a new method is proposed to address the creep characteristics rather than the method of using a tension load cell for measuring the tension of the mooring line. This study uses a synthetic mooring rope made from a polymer material, which usually consists of three parts: center, eye, and splice, and which makes a joint for two successive ropes. We integrate the optical sensor into the synthetic mooring ropes to measure the rope tension. The different structure of the mooring line in the longitudinal direction can be used to measure the loads with the entire mooring configuration in series, which can be defined as SMART (Smart Mooring and Riser Truncation) mooring. To determine the characteristics of the basic SMART mooring, a SMART mooring with a diameter of 3 mm made of three different polymer materials is observed to change the wavelength that responds as the length changes. By performing the longitudinal tension experiment using three different SMART moorings, it was confirmed that there were linear wavelength changes in the response characteristics of the 3-mm-diameter SMART moorings. A 54-mm-diameter SMART mooring is produced to measure the response of longitudinal tension on the center, eye, and splice of the mooring, and a longitudinal tension of 100 t in step-by-step applied for the Maintained Test and Fatigue Cycle Test is conducted. By performing a longitudinal tension experiment, wavelength changes were detected in the center, eye, and splice position of the SMART moorings. The results obtained from each part of the installed sensors indicated a different strain measurement depending on the position of the SMART moorings. The variation of the strain measurement with the position was more than twice the result of the difference measurement, while the applied external load increased step-by-step. It appears that there is a correlation with an externally generated longitudinal tensional force depending on the cross-sectional area of each part of the SMART mooring.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.99-100
• /
• 2023

It is proposed that smart construction machinery should be developed to prevent safety accidents at construction sites.

• International journal of advanced smart convergence
• /
• 제5권2호
• /
• pp.66-72
• /
• 2016

With the growing shift from traditional educational approaches and studying to the more digital classroom, using electronic textbooks and digital native's demand, there is a growing need to develop new methods for learn Kanji characters for children. The purpose of this study is to help children learn the basic Kanji by using stop motion and block methods, and approaching the basic Kanji character education with a more innovative and interactive smart phone APP. In the development of this smart phone App for children's Kanji character education proposed in this study, 100 basic Kanji characters for children are selected. These 100 characters are required for the stop motion animation production, where each selected Kanji is created as a stop-motion animation utilizing a variety of techniques, such as storytelling, to better engage children. The intelligent App is designed with image recognition technology, so that in the learning process children take a picture for the assembled block using their smart phone, the APP then recognizes whether it is assembled correctly, and then plays an animation corresponding to the assembled Kanji character.

• 정보과학회지
• /
• 제31권3호
• /
• pp.81-100
• /
• 2013

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2011년도 추계학술대회
• /
• pp.100-101
• /
• 2011

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권3호
• /
• pp.91-100
• /
• 2022

Major developed countries are seriously considering smart factories to increase their manufacturing competitiveness. Smart factory is a customized factory that incorporates ICT in the entire process from product planning to design, distribution and sales. This can reduce production costs and respond flexibly to the consumer market. The smart factory converts physical signals into digital signals, connects machines, parts, factories, manufacturing processes, people, and supply chain partners in the factory to each other, and uses the collected data to enable the smart factory platform to operate intelligently. Enhancing personalized value is the key. Therefore, it can be said that the success or failure of a smart factory depends on whether big data is secured and utilized. Standardized communication and collaboration are required to smoothly acquire big data inside and outside the factory in the smart factory, and the use of big data can be maximized through big data analysis. This study examines big data analysis and standardization in smart factory. Manufacturing innovation by country, smart factory construction framework, smart factory implementation key elements, big data analysis and visualization, etc. will be reviewed first. Through this, we propose services such as big data infrastructure construction process, big data platform components, big data modeling, big data quality management components, big data standardization, and big data implementation consulting that can be suggested when building big data infrastructure in smart factories. It is expected that this proposal can be a guide for building big data infrastructure for companies that want to introduce a smart factory.