• 한국기계가공학회지
• /
• 제9권2호
• /
• pp.6-11
• /
• 2010

For the purpose of reducing the energy consumption in the house heating, the various devices have been developed. One of these is to control the flow in the heat pipe and the flow control valve using shape memory alloy(SMA) spring is proposed in our study. The proposed house heating system is to save the gas consumption and the remote control system is designed for the convenience of using the proposed valve. The developed valve consists of SMA spring, disk, return spring, and regulation handle. The regulation handle is for supplying the additional hot water and is controlled by remote-control-motor. In order to design the remote control system, the Zigbee wireless communication protocol is used. The performance of the proposed valve structure is shown through the experimental result.

• Smart Structures and Systems
• /
• 제3권2호
• /
• pp.189-200
• /
• 2007

As a functional material, shape memory alloy (SMA) has attracted much attention and research effort to explore its unique properties and its applications in the past few decades. Some of its properties, in particular the electrical resistance (ER) based self-sensing property of SMA, have not been fully studied. Electrical resistance of an SMA wire varies during its phase transformation. This variation is an inherent property of the SMA wire, although it is highly nonlinear with hysteresis. The relationship between the displacement and the electrical resistance of an SMA wire is deterministic and repeatable to some degree, therefore enabling the self-sensing ability of the SMA. The potential of this self-sensing ability has not received sufficient exploration so far, and even the previous studies in literature lack generality. This paper concerns the utilization of the self-sensing property of a spring-biased Nickel-Titanium (Nitinol) SMA actuator for two applications: ER feedback position control of an SMA actuator without a position sensor, and estimation of the opening of a SMA actuated valve. The use of the self-sensing property eliminates the need for a position sensor, therefore reducing the cost and size of an SMA actuator assembly. Two experimental apparatuses are fabricated to facilitate the two proposed applications, respectively. Based on open-loop testing results, the curve fitting technique is used to represent the nonlinear relationships between the displacement and the electrical resistance of the two SMA wire actuators. Using the mathematical models of the two SMA actuators, respectively, a proportional plus derivative controller is designed for control of the SMA wire actuator using only electrical resistance feedback. Consequently, the opening of the SMA actuated valve can be estimated without using an extra sensor.

• 한국정밀공학회지
• /
• 제16권8호
• /
• pp.79-87
• /
• 1999

In this study, a new type of flow control valve which is SMA actuated flow control valve is presented. The flow control valve is actuated by a small motion of shape memory alloy. The performance of this valve as a position control component is analyzed by computer simulation. A variable structure control technique is applied for the position control by the flow control valve. The position control performance of the valve is evaluated on the step responses of a PID control by a electrohydraulic servo valve. For the simulation study, first, the mathematical model of a hydraulic system, which is consisted of the flow control valve and a hydraulic cylinder, is formulated. This mathematical model and the designed variable structure control algorithm are then combined by the MATLAB software. The same sequence of work is carried out for the PID position control system with a electrohydraulic servo valve. The simulation results show the validity of the new type of flow control valve as a variable position control component.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1055-1060
• /
• 2009

Noise is one of the major environmental problems in human life. But hot water distributers with the flow rate control valve bring about often noise according to the heating control condition in residential buildings. The sound power level increased as the flow rate and pressure difference increased. And thus, experimental analyses for the flow rate control and the pressure difference control were carried out in this study to reduce the noise emitted from the flow rate control valve. As the results, the flow rate control method using a SMA(Shape Memory Alloy)-valve and the flow rate control system using a pressure difference sensor can be expected to control noise in the region of below 50 dB of sound power level.

• Journal of Chest Surgery
• /
• 제51권3호
• /
• pp.209-212
• /
• 2018

Superior mesenteric artery (SMA) aneurysms are rare and often fatal. A 72-year-old man had previously been admitted to the emergency room with epigastric pain and heart murmur. The echocardiographic diagnosis was vegetation on the aortic and mitral valves, with moderate regurgitation from both valves due to infective endocarditis. No aneurysm was detected on abdominal computed tomography, and emergency double-valve replacement was performed. On postoperative day 25, the patient experienced abrupt abdominal pain, and computed tomography revealed a mycotic SMA aneurysm. Open surgical repair of the SMA aneurysm was performed using the femoral vein, and the patient's postoperative course was uneventful.

• Journal of Chest Surgery
• /
• 제39권7호
• /
• pp.527-533
• /
• 2006

배경: 전북대학교 흉부외과에서 1984년 5월 이후 시행한 St. Jude 기계판막을 이용한 승모판막 치환술의 장기 성적을 후향적 방법으로 고찰해보고자 한다. 대상 및 방법: 1984년 5월부터 1996년 12월까지 전북대학교 흉부외과에서 St. Jude 기계판막을 이용하여 승모판막 치환술을 받은 총 95명의 환자를 대상으로 하였으며 추적관찰 기간은 2004년 5월까지였다. 결과: 환자의 나이는 19에서 69세의 범위를 보였다. 평균 추적관찰 기간(mean${\pm}$standard deviation)은 $10.6{\pm}4.2$ 년이었다. 조기 사망은 4.2% (4/95) 이고 만기 사망 환자는 9명이었으며 5년, 10년, 20년 총 생존율은 각각 $90.5{\pm}3.0%,\;87.9{\pm}3.4%\;83.2{\pm}4.6%$를 보였으며 판막관련사망이 없을 확률은 각각 $95.5{\pm}2.1%,\;94.3{\pm}2.4%\;91.0{\pm}3.9%$를 보여주었다. 7명의 환자에서 혈색전층으로 인한 합병증이 발생하였고(1.05%/patient-year) 15명의 환자에게서 의의 있는 항응고제관련 출혈이 발생하였다(3.56%/patient-year). 추적관찰 기간 중 기계판막의 구조적 결함은 없었으며 모든 합병증이 발생하지 않을 확률은 5년, 10년, 20년 동안에 각각 $82.0{\pm}3.9%,\;71.3{\pm}4.8%\;42.4{\pm}10.5%$였다. 결론: St. Jude기계판막은 내구성이 좋으며 판막에 관련된 합병증의 빈도가 낮아 안전하게 사용할 수 있는 판막이라 생각하며 다만 기계판막을 가지고 있는 환자에서 항응고제 복용과 용량 조정에 관한 적정한 추적관찰로 항응고제 관련 출혈의 빈도를 더욱 낮추어야 한다고 생각한다.}3mm$였다. 괴사된 부위에서 살아 있는 세포를 발견할 수 없었다. 결론: 냉동 후 해동과정은 폐조직의 전도율을 변화시키며 이는 이차 냉동 시 폐조직의 온도를 더욱 떨어뜨리고 세포파괴의 범위를 넓힌다., $3{\mu}mol/L,\;6{\mu}mol/L,\;9{\mu}mol/L$의 농도로 첨가하여 심근세포로의 분화를 유도하였다. 4주간의 배양이 끝난 후 각 실험 조직군의 세포들을 cell blocks으로 만든 후에, CD34, heavy myosin chain, troponin T, SMA에 대한 항체를 이용하여 면역형광염색을 시행하였고, 형광염색에 반응을 보인 세포들의 대략적 비율을 비교하였다. 결과: CD34, heavy myosin chain에 대하여는 모두 음성이었으나, SMA에 대해서는 $3{\mu}mol/L,\;6{\mu}mol/L$의 복강 내 지방조직에서 $5{\sim}10%$ 정도의 양성반응을 보였고, troponin T에 대하여는 피하지방조직과 복강 내 지방조직 모두에서 $6{\mu}mol/L$와 $9{\mu}mol/L$에서 $10{\sim}15%$ 정도의 양성 반응을 보였다. 결론: 본 연구 결과, 지방조직에서 추출한 중간엽 줄기세포는 심근세포로 분화할 수 있는 가능성이 충분히 있는 것이 확인되었으나, 분화유도 비율면에서는 만족할 수준이 되지 못하였으며, 심근세포로의 분화는 복부 피하지방과 복강 내 지방조직에서 모두 가능한 것으로 판단되었다. 대형조각 작품들 - 예를 들어 대형화된 미니별 조각이나 개념미술, 또는 대지예술 등 -은 풍경의 실재가 아니기 때문에 환경으로부터 구분된다고 언급하고 있다. 이들 조각은 더 이상 만져지는 실체이거나 점유하는 공간의 상징언어를 지닌 조각의 범주에 한정되지 않게 된다.