• Journal of the Korean Society of Safety
• /
• v.12 no.3
• /
• pp.3-9
• /
• 1997

The strength of material is scattered owing to the inhomogenity of microstructure, in spite of the same material. Therefore, in order to design the mechanical structure with the reliability engineering, it is important to grasp the statistic nature of material strength. In this paper, effects of grain sizes for the statistical nature of the fatigue crack growth was discussed. And the statistical of mechanical properties was compared with statistical nature of the fatigue crack growth rate.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.6
• /
• pp.953-962
• /
• 1987

Domestic dissimilar structural steels, SM 45 C and SUS304 were friction welded under optimal welding condition and the micro-artificial holes were drilled at SM 45 C base metal, SM 45 C HAZ, welded zone, SUS 304 HAZ, and SUS 304 base metal for fatigue behavior tests. In this study, the fatigue limit and the behavior of micro-crack propagation, crack propagation rate, and its dependency on stress intensity factor under the low stress level and high stress level of bending stress have been investigated. The results obtained are as follows. (1) The fatgiue strength of the portion of SM45C B.M., SM45C HAZ, welded zune, SUS304 HAZ and SUS304 B.M. on notched friction welded specimens are 20 kgf/mm$^{2}$, 32 kgf/mm$^{2}$, 27kgf/mm$^{2}$, 29kgf/mm$^{2}$, and 29kgf/mm$^{2}$, respectively. (2) The fatigue strength of welded zone of unnotched and notched specimens are 32.5kgf/mm$^{2}$, and 27kgf/mm$^{2}$, respectively. (3) Micro-crack initiation in the welded zone, HAZ, and each base metals occurrs simultaneously in front and rear of micro-hole tips in the view of the rotational directions. (4) Fatigue crack propagates more slowly in the welded zone than in another protions of specimen, regardless of the magnitude of the stress level. (5) Fatigue crack propagation rates were plotted as a function of stress intensity range. The value of m in the equation da/dN=C(.DELTA.K)$^{m}$ was found to range from 2.09-2.55 in this study.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.4
• /
• pp.401-406
• /
• 2011

This study presents the stress safety analysis of a cylinder, which is manufactured by a tempered ASTM D2, tempered SM45C and normalized SM45C materials, respectively. The inner diameter of three cylinder models are 85mm, 95mm, and 11 Omm and the total length of a cylinder is 2,365mm for a high pressure injection molding machine. The FEM computed results show that the inner diameter of 85mm with a thick thickness of 62.5mm may produce the injection pressure of 325MPa and the inner diameter of 110mm with 50mm thickness reduces up to the injection pressure of 220MPa because of a reduced thickness of a cylinder. These injection pressures are enough for a high pressure injection molding machine assembled by ASTM D2 cylinder. And also, an injection cylinder manufactured by a tempered SM45C material in which is low priee may produce 225MPa injection molding pressure and this may sufficiently endure stress safety compared to that of ASTM D2 cylinder material. Thus, this study recommends that tempered SM45C cylinder is appropriated for a mild injection molding machine as an alternative cylinder material when the safety strength and low prices are considered. But the normalized SM45C cylinder material does not meet a stress safety of yield strength in general.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.7
• /
• pp.44-55
• /
• 2003

The Nd:YAG laser process is known to have high speed and deep penetration capability to become one of the most advanced welding technologies. This paper describes the machining characteristics of SM45C carbon steel welding by use of an Nd:YAG laser. In spite of its good mechanical characteristics, SM45C carbon steel has a high carbon contents and suffers a limitation in the industrial application due to the poor welding properties. The major process parameters studied in the present laser welding experiment were position of focus, travel speed and laser power. Optical microscope and SEM were used to investigate the microstructures of the welded zone. The experimental results showed that penetration depth of the welding process increases with laser power. Both the microstructural investigation and the theoretical calculations indicated that materials undergoes a very high heating and cooling cycle during welding process. It was also found that the austenite nucleation takes place at the initial stage and the completion temperature of austenite transformation is much higher than in the case of the arc welding.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.165-165
• /
• 2013

희토류 발광 물질은 4f 껍질에 위치하는 전자의 독특한 특성 때문에 발광 소자와 디스플레이에 그 응용성을 확장하고 있다. 본 연구에서는 고효율의 적색과 주황색 형광체를 합성하기 위하여 모체 격자 CaNb2O6에 희토류 이온인 유로퓸과 사마륨을 치환 고용하여 최적의 합성 조건을 조사하였다. Ca1-1.5xNb2O6:REx3+ (RE=Eu, Sm) 형광체 분말 시료는 고상반응법을 사용하여 활성제 이온인 Eu3+와 Sm3+의 농도비를 0, 0.01, 0.05, 0.10, 0.15, 0.20 mol 로 변화시키면서 합성하였다. 초기 물질 CaO, Nb2O5, Eu2O3와 Sm2O3을 화학 적량으로 측정하고, 400 rpm의 속도로 24시간 밀링 작업을 수행한 후에, 건조기 $60^{\circ}C$에서 28시간 건조하고, 시료를 막자 사발에서 갈아 세라믹 도가니에 담아 튜브형 전기로에서 분당 $5^{\circ}C$의 비율로 승온시켜 $500^{\circ}C$에서 5시간 동안 하소와 $1,100^{\circ}C$에서 6시간 소결하여 합성하였다. Eu3+가 도핑된 경우에, 발광 스펙트럼은 Eu3+ 이온의 농도비에 관계없이 강한 적색 발광 스펙트럼이 616 nm에서 관측되었다. 이외에도, 596 nm와 708 nm에서 상대적으로 발광 세기가 약한 주황색 발광과 적색 발광 신호가 검출되었으며, 541 nm에서는 매우 약한 녹색스펙트럼이 관측되었다. Eu3+ 이온의 농도비에 0.01 mol에서 0.15 mol로 증가함에 따라 주발광 신호의 세기는 점점 증가하였으며, 0.15 mol에서 최대 발광 세기를 나타내었다. Eu3+ 이온의 농도비가 0.20 mol 로 더욱 증가함에 따라 주 피크의 세기는 농도 소강 현상에 의하여 현저히 감소함을 보였다. 한편, 주된 흡광 스펙트럼은 279 nm에서 나타났는데, 이것은 전하전달밴드 신호이다. Sm3+가 도핑된 형광체 분말의 발광 스펙트럼은 모든 시료의 경우에 613 nm에서 강한 적주황색 발광 스펙트럼이 관측되었고, 상대적으로 세기가 약한 570 nm와 660 nm에 피크를 갖는 황색과 적색 발광 스펙트럼이 발생하였다. 흡광과 발광 스펙트럼의 최대 세기는 0.05 mol에서 나타났으며, Sm3+ 이온의 농도비가 더욱 증가함에 따라 흡광과 발광 세기는 급격하게 감소하였다.

• Fisheries and Aquatic Sciences
• /
• v.23 no.1
• /
• pp.2.1-2.6
• /
• 2020

Background: As the cost of fishmeal continues to rise, there will be a need to optimize the diet by minimizing dietary fishmeal inclusion in aquafeed. In this study, a 7-week experiment was conducted to evaluate soybean meal, fermented soybean meal (soytide), and sesame meal as fishmeal replacers in whiteleg shrimp, Litopenaeus vannamei. Methods: A 30%-based fishmeal diet was considered as control (CON), six other diets were prepared by replacing 20% or 40% of fishmeal with soybean meal (SB₂₀ and SB₄₀), fermented soybean meal (ST₂₀ and ST₄₀), or sesame meal (SM₂₀ and SM₄₀) from the CON diet. Twenty shrimp with average initial weight of 0.65 ± 0.05 g (mean ± SD) were randomly distributed into 21 tanks (45 L) and fed four times a day. Water temperature was controlled at 28 ± 1 ℃ and aeration was provided by air stones. Results: Weight gain, specific growth rate, feed efficiency, and protein efficiency ratio of shrimp fed CON showed no significant differences compared to shrimp fed all the other diets. However, growth performance of shrimp fed ST₂₀ diet was significantly higher than those of shrimp fed the SM₂₀ and SM₄₀ diets (P < 0.05). Superoxide dismutase activity (SOD) of shrimp fed CON, ST₂₀, and ST₄₀ diets was significantly higher than those of shrimp fed the SB₄₀ and SM₄₀ diets. But there were no significant differences among shrimp fed CON, SB₂₀, ST₂₀, ST₄₀, and SM₂₀ diets. Also, lysozyme activity of shrimp fed ST₂₀ diet was significantly higher than those of shrimp fed the SB₄₀ and SM₄₀ diets. Although, lysozyme activity of shrimp fed the CON diet was not significantly different compared to shrimp fed all the other experimental diets. Conclusions: Therefore, SB, ST, and SM could replace 40% of fishmeal based on growth performance and lysozyme. According to the SOD activity, SB and SM could replace 20% of fishmeal and ST could replace 40% of fishmeal in juvenile whiteleg shrimp Litopenaeus vannamei.

• Journal of the Korean Chemical Society
• /
• v.43 no.3
• /
• pp.257-263
• /
• 1999

Ln-macrocyclic([20]DOTA) complexes, [Ln([20]DPTA)(NO_{3})(H_{2}O)](NO_{3})_{2} \cdotxH_{2}O{Ln(III)=Pr, Sm, Gd, Dy}, which had been synthesized from 2, 6-diformyl-p-cresol(DFPC), was placed in methanol for 2 days, and $[Ln([20]DPTA)(NO_{3})(CH_{3}OH)]^{2+}$ was formed. The equilibrium constants(L) for the substitution of coordinated $CH_{3}OH$ in the Ln-[20]DOTA complexes by various auxiliary ligands, $L_{a}(=monodentate ligands; pyridine, imidazole, triethylamine, diethylamine, piperidine) were determined spectroscopically at $25^{\circ}C$ and 0.1M. The pKa of auxiliary ligand is in the order of pyridine < imidazole < triethylamine < diethylamine < piperidine, however the K has shown the trend of pyridine < imidzole < diethylamine < piperidine < triethylamine.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.12
• /
• pp.1786-1793
• /
• 2005

The study compared the fatty acid profiles of 3 muscles (Longissimus dorsi, LD, Triceps brachii, TB and Semimembranosus, SM) obtained from Korean Hanwoo (18 steers, 24 months old) and Australian Angus beef (18 steers, 24 months old) and assessed their role in sensory perception. The samples of each carcass were prepared in the same manner, and cooked both as traditional grilled steaks and Korean BBQ style. A total of 720 Korean sensory panelists evaluated the beef samples for tenderness, juiciness, flavor, and overall liking. Oleic acid (18:1) was significantly (p<0.05) higher in TB than that in LD and SM. The essential linoleic acid (C18:2) was significantly (p<0.05) higher in TB and SM than that in LD. For LD muscle, the proportion of saturated fatty acids was significantly (p<0.05) highest, while that of polyunsaturated fatty acids was lowest among the three muscles. Australian Angus beef had significantly (p<0.05) higher n-3 PUFA than that of the Korean Hanwoo for the three muscles, while the latter contained significantly (p<0.05) higher n-6 PUFA than that of the former. The clustering analysis showed that there a was significant difference in fatty acids such as C16:0, C16:1n7, C18:0, C18:2n6, C18:3n3, C20:3n6, C20:4n6, C22:4n6, and C22:5n3 for sensory perception (tenderness, juiciness, flavor and overall likeness) of the beef from two origins (p<0.05) among three clusters. Especially, C14:0 had a significant effect on sensory perception only for Korean Hanwoo beef; while C20:5n3 had a significant (p<0.05) effect only for Australian Angus beef based on clustering with the sensory variables.

• Journal of the Korean Ceramic Society
• /
• v.35 no.4
• /
• pp.355-363
• /
• 1998

The oxygen flux of SDC ($Sm_2O_3\;doped\;CeO_2$) solid electrolyte membranes with electronic and oxygen ion-ic conductivities has been investigated as a basic research in order to develop the conversion process of na-tural gas to syngas using the ceramic membrane reactor. Tube type membranes(1 mm thickness) were fa-bricated by slip casting of SDC powders prepared by the oxalate coprecipitaion method. Dense oxygen per-meation membranes(0.1 mm thickness) could be synthesized via sintering at $1450^{\circ}C$ for 2h and their re-lative density was over 95% The oxygen flux through SDC membranes doped 20mol% $Sm_15$ was about $1.13{\times}10^{-5}\;mol/m_2{\cdot}sec$ at low temperature around $800^{\circ}C$. In addition the SDC membranes showed a good thermaal stability for a long period of service.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.1
• /
• pp.17-20
• /
• 2001

Cytogenetic characteristics of three species in Centropomidae (Coreoperca herzi, C. kawamebari and Siniperca schezeri) were evaluated, based on karyologcial analysis, erythrocytic measurement and genome size estimation using flow cytometry. Modal chromosome number of three species was same as 2n=48. Karyotypes were 4SM+44A$\cdot$T (NF=52) for Coreoperca herzi, 6SM+42 A$\cdot$T (NF=52) for C. kawamebari and 4SM+44A$\cdot$T (NF=52) for Siniperca schezeri. Heteromorphic sex chromosome was not found in both sexes of any species examined, Cellular and nuclear volumes of Siniperca schezeri were smaller than those of other two species, Average amounts of cellular DNA contents estimated by flow cytometry were well coincided with erythrocytic sizes. The estimated genome sizes were 1.83, 1.85 and 1.44 pg/cell for C. herzi, C. kawamebari and S. schezeri, respectively.