• Journal of radiological science and technology
• /
• v.34 no.2
• /
• pp.97-103
• /
• 2011

The Full-length examination of the femur sometimes does not show all of the femur because of the limited width in collimator and size of detectors although it is located in the diagonal direction. Aim of this study is to identify usefulness of the method of combining images which obtained from two radiographic images containing the femoral head and condyle respectively. Our group interviewed 30 radiological technologists who used both palliative DR method and SM method in their examinations of the femur of patients who were carried to the emergency rooms in Gwang-ju city from August 2007 to November 2009. We evaluated twenty images according to the contraction of femoral neck, turning of knee joints and inclusion of the femur. The examination were performed by two radiologists and six radiological technologists who have more than ten years of career. The results are as follows: SM method was graded with higher score for examination time, number of examiners, emaciation, retake and patients' discomfort (p< 0.001) while the. SM method was scored higher than the palliative DR method in the palliative DR method for examination of long bone.

• Transactions on Electrical and Electronic Materials
• /
• v.5 no.2
• /
• pp.81-85
• /
• 2004

High T$\_$c/ (Sm/Y)$\_$1.8/Ba$\_$2.4/Cu$\_$3.4/O$\_$7-$\delta$/ ［(Sm/Y)］ superconductor, a combination of Y and Sm(50% each), was systematically investigated by the zone melt growth process. A sample prepared by this method showed well-textured microstructure, and (Sm/Y)$_2$BaCuO$\_$5/［(Sm/Y)211］inclusions were uniformly dispersed in large (Sm/Y)Ba$_2$Cu$_3$O$\_$y/ ［(Sm/Y)123］matrix. The sample showed a sharp superconducting transition at 91 K. The magnetization measurements of the (Sm/Y)1.8 sample exhibited the enhanced flux pinning, compared with Y$\_$1.8/Ba$\_$2.4/Cu$\_$3.4/O$\_$7-$\delta$/(Y1.8) sample without Sm. Critical current densities of (Sm/Y) 1.8 sample was 3.5${\times}$10$^4$A/$\textrm{cm}^2$ at 1 T and 77 K.

• Journal of the Korean Magnetics Society
• /
• v.9 no.6
• /
• pp.312-320
• /
• 1999

Effect of deposition conditions on the magnetic properties of SmCo/Cr prepared by a RF magnetron sputtering method was studied. We obtained the maximum coercivity of 3.2 kOe in the sample of Cr(50 nm)/SmCo(40 nm, 50W, 20 mT)/Cr(150 nm, 100 W, 30 mT). The coercivity of the SmCo/Cr depends largely on the roughness of the Cr underlayer and the composition of SmCo. The roughness of the Cr underlayer increased with increasing the Ar pressure and thickness, and promoted the isolation of SmCo grains which resulted in an enhanced coercivity. The composition of the SmCo was changed with RF power and Ar pressure due to the mass difference between Sm and Co and the resputtering phenomena. The maximum coercivity was obtained in the composition of about 20 at.% Sm. The mechanism of magnetization reversal of the present SmCo films changed from domain wall motion to domain rotation as the RF power and the Ar pressure increase. This was though to be due to the defects, such as the roughness of Cr surface, porous column boundaries etc., which inhibit domain wall movement.

• The KIPS Transactions:PartD
• /
• v.14D no.5
• /
• pp.483-490
• /
• 2007

Recently mining techniques that analyze the data stream to discover potential information, have been widely studied. However, most of the researches based on the support are concerned with the frequent event, but ignore the infrequent event even if it is crucial. In this paper, we propose SM-AF method discovering association rules to an abnormal event. In considering the window that an abnormal event is sensed, SM-AF method can discover the association rules to the critical event, even if it is occurred infrequently. Also, SM-AF method can discover the significant rare itemsets associated with abnormal event and periodic event itemsets. Through analysis and experiments, we show that SM-AF method is superior to the previous methods of mining association rules.

• Journal of Powder Materials
• /
• v.16 no.5
• /
• pp.336-341
• /
• 2009

To produce alloy powders with only Sm$_2$Fe$_{17}$ single phase by reduction-diffusion (R-D) method, the effect of excess samarium oxide on the preparation of Sm-Fe alloy powder during R-D heat treatment was studied. The quantity of samarium oxide was varied from 5% to 50% whereas iron and calcium were taken 0% and 200% in excess of chemical equivalent, respectively. The pellet type mixture of samarium, iron powders and calcium granulars was subjected to heat treatment at 1100$^{\circ}C$ for 5 hours. The R-D treated pellet was moved into deionized water and agitated to separate Sm-Fe alloy powders. After washing them in deionized water several times, the powders were washed with acetic acid to remove the undesired reaction products such as CaO. By these washing and acid cleaning treatment, only 0.03 wt% calcium remained in Sm-Fe alloy powders. It was also confirmed that the content of unreacted $\alpha$-Fe in Sm$_2$Fe$_{17}$ matrix gradually decreased as the percentage of samarium oxide is increased. However, there was no significant change above 40% excess samarium oxide.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2001.02a
• /
• pp.9-12
• /
• 2001

The microstructure evolution and the peritectic solidification of Sm$Ba_{2}$$Cu_{3}$ $O_{7-\delta}$ superconducting materials during the isothermal annealing were studied over the temperature range 1030-$1060^{\circ}C$ The faceted growth of the peritectic phase and its dependence upon Sm-diffusion in the liquid phase are discussed. A growth model is proposed to explain the growth shape of Sm123 crystals.

• Journal of Soil and Groundwater Environment
• /
• v.6 no.4
• /
• pp.73-81
• /
• 2001

With the development of industry and standard of living, the quantity of groundwater consumption has been increasing. For the analysis of groundwater, to determine the hydraulic parameters of aquifer is very important. Various numerical methods have been developed to solve aquifer tests and eliminate the subjectivity of traditional graphical type curve methods. The slope-matching method, which matches the slope of the Theis type curve to the slope of the field data, can be used to numerically solve pump tests for both leaky and nonleaky aquifers. A FORTRAN program on based slope-matching method was developed to obtain the transmissivity, storage coefficient, and leaky factor from pumping test data automatically. Results derived from published data show that the improved slope-matching method gives parameters close to the ones derived by the slope-matching method.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2014.06a
• /
• pp.64-66
• /
• 2014

본 논문에서는 케이블 TV 콘텐트를 대용량의 Wi-Fi 통신을 이용하여 전송하고, 집 안에 배치된 여러 가지의 수신기를 이용하여 콘텐트를 편하게 즐길 수 있는 서비스에 적합한 SM(spatial modulation) 전송기법의 수신 성능을 분석한다. 케이블 채널의 개수는 100가지가 넘으며 HD 이상의 화질을 가진다. 이러한 수십 개의 대용량 콘텐트를 무선으로 한정된 대역폭에 전송하기 위해서는 공간다중화 방식의 MIMO 기법이 필요하다. 그 중에서도 채널 간의 간섭이 많은 집 안 환경에 적합한 SM 전송기법은 수신 신호간의 간섭이 없으며 수신기가 간단하다는 장점을 가지고 있다. 또한 기존 SM의 낮은 대역효율을 증가시키기 위한 golden-SM 방식도 제안되었다. 그러나 실제 채널 환경에서의 기존 SM 전송기법들의 수신 성능은 비교된 것이 거의 없으므로 본 논문에서는 WiMAX(IEEE802.16a)에서 사용되고 있는 SUI 채널 모델을 고려하여 기존 SM 기법들의 수신 성능을 비교분석하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.190-193
• /
• 2003

Sm-doped lead zirconate titanate($Pb_{1.1}(Zr_{0.6}Ti_{0.4})O_3$; PZT) thin films on the Pt(111)/Ti/$SiO_2$/Si(100) substrates prepared by a sol-gel method. The effect on structural and electrical properties of PZT thin films measured according to the Sm content. Sm-doping altered significantly dielectric and ferroelectric properties. The remanent polarization and the coercive field decreased with the increasing Sm content. The dielectric constant and the dielectric loss of PZT thin films decreased with the increasing Sm content. At 100 kHz, the dielectric constant and the dielectric loss of. the 0.3 mol% of Sm-doped PZT thin film were 1200 and 0.12 respectively. The remanent polarization (2Pr) of the 0.3 mol% of Sm-doped PZT thin film was $52.13{\mu}C/cm^2$ and the coercive field was 94.01 kV/cm. The 0.3 mol% of Sm-doped PZT thin film showed an improved fatigue characteristic comparing to the undoped PZT thin film.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.24 no.2
• /
• pp.33-51
• /
• 2011

Objectives: This study was performed to assess the protective effect of Saengmaek-san (SM) on UVB-induced HaCaT cell damage. Methods: The protective effects of Saengmaek-san(SM) were determined by UVB-induced HaCaT assay. We assessed protective effects of Saengmaek-san (SM) on LDH release and nitrite release from HaCaT. And COX-2, Bcl-2, Bax, $TNF{\alpha}$, c-jun, c-fos, NF-kB, iNOS, Bcl-xL gene expression were determined in HaCaT using real-time PCR method. Results: 1. SM inhibited LDH-release, nitrite production in UVB-exposed HaCaT. 2. SM suppressed the gene expression of COX-2, $TNF{\alpha}$ in UVB-exposed HaCaT. 3. SM increased the gene expression of Bcl-2, Bax, Bcl-xL family protein in UVB-exposed HaCaT. 4. SM suppressed the gene expression of c-jun, c-fos, NF-kB in UVB-exposed HaCaT. Conclusions: The study showed SM inhibited the cell damage in UVB-exposed HaCaT.