• YAKHAK HOEJI
• /
• v.44 no.6
• /
• pp.558-565
• /
• 2000

SK-1080 is one of the newly developed orally active nonpeptide angiotensinII $AT_1-receptor$ antagonist that selectively acts at $AT_1$ receptor with high affinity. The cardiac effect on ischemia/reperfusion injury of SK-1080 was compared with those of losartan, a prototype of this class, in isolated rat hearts. Isolated perfused rat heart was pretreated with drug for 10 min and then subjected to global ischemia for 30 min followed by reperfusion with- or without drug for 30 min. The possible additive effect of SK-1080 on the platelet aggregation and coagulation in human blood was also studied. We investigated whether SK-1080 effects the platelet aggregation induced by ADP, a platelet agonist partially dependent on $thromboxaneA_2$. The clotting times in the prothrombin time (PT) and activated partial thromboplastin time (APTT) were also examined in human plasma in vitro as coagulation screening test. SK-1080 improved reperfusion function (LVDP, left ventricular developed pressure; PRP, rate-pressure product) in a dose-dependent manner. SK-1080 reduced ADP-induced platelet aggregation compared with vehicle but less than losartan, and did not affect clotting times.

• Journal of Ginseng Research
• /
• v.44 no.1
• /
• pp.115-122
• /
• 2020

Background: In aged skin, degradation of collagen fibers, which occupy the majority of the extracellular matrix in the dermis, and changes of aquaporin 3 (AQP3) and skin constituents, such as hyaluronic acid and ceramide, cause wrinkles and decrease skin moisturization to contribute to dryness and lower elasticity skin. Red ginseng (RG) is used as a cosmetic and food material and is known to protect from UVB-induced cell death, increase skin hydration, prevent wrinkles, and have an antioxidative effect. But, in general, RG used as a material is the soluble liquid portion in the solvent, and the part that is not soluble in the solvent is discarded. Thus, we made the whole RG into microgranulation and dispersed in water to produce gel form for using entire RG, and it was named red ginseng NaturalGEL (RG NGEL). Methods: RG NGEL was investigated for matrix metalloproteinases inhibitory activity, induction of Type I collagen, AQP3, hyaluronan synthetase 2, serine palmitoyl transferase, ceramide synthase 3, and filaggrin expression and compared with RG water extract. Results: RG NGEL reduced the levels of UV-induced matrix metalloproteinases and increased Type I collagen in human fibroblast cells and upregulated AQP3, hyaluronan synthetase 2, serine palmitoyl transferase, ceramide synthase 3, and filaggrin expressions in human keratinocytes compared with RG water extract. Conclusion: RG NGEL has the potential as an effective reagent for antiaging cosmetics to improve wrinkle formation and skin hydration.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.196.2-196.2
• /
• 2013

본 연구에서는 분자선 에피택시 (MBE)법으로 성장된 InAs submonolayer quantum dot (SML-QD)을 태양전지에 응용하여 광학 및 전기적 특성을 평가하였다. 본 연구에서 사용된 양자점 태양전지(quantum dot solar cell, QDSC)의 구조는 n+-GaAs 기판 위에 n+-GaAs buffer와 n-GaAs base layer를 차례로 성장 한 후, 활성영역에 InAs/InGaAs SML-QD와 n-GaAs spacer layer를 8주기 형성하였다. 그 위에 p+-GaAs emitter, p+-AlGaAs window layer를 성장하고 ohmic contact을 위하여 p+-GaAs 를 성장하였다. SML-QD 구조의 두께는 0.3 ML 이며, 이때 SML-QD의 적층수를 4 stacks 으로 고정하였다. SML-QD 와의 비교를 위하여 2.0 ML크기의 InAs자발 형성 양자점 태양전지(SK-QDSC)과 GaAs 단일 접합 태양전지 (reference-SC)를 동일한 성장조건에서 제작하였다. PL 측정 결과, 300 K에서 SML-QD의 발광 피크는 SK-QD 보다 고에너지에서 나타나는데(1.349 eV), 이것은 SML-QD가 SK-QD보다 작은 크기를 가지기 때문으로 사료된다. SML-QD는 single peak를 보이는 반면, SK-QD는 dual peaks (1.112 / 1.056 eV)을 확인하였다. SML-QD의 반치폭(full width at half maximum, FWHM)이 SK-QD에 비하여 작은 것으로 보아 SML-QD가 SK-QD보다 양자점 크기 분포의 균일도가 높은 것으로 해석된다. Illumination I-V 측정 결과, SML-QDSC의 개방 전압(VOC) 과 단락전류밀도(JSC)는 SK-QDSC의 값과 비교해 보면, 각각 47 mV와 0.88 mA/cm2만큼 증가하였다. 이는 SK-QD보다 상대적으로 작은 크기를 가진 SML-QD로 인해 VOC가 증가되었으며, SML-QD가 SK-QD 보다 태양광을 흡수할 수 있는 영역이 비교적 적지만, QD내에 존재하는 energy level에서 탈출 할 수 있는 확률이 더 높음으로써 JSC가 증가한 것으로 분석 된다.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.17 no.1
• /
• pp.209-212
• /
• 2003

A wide variety of cancer chemotherapeutic agents have been shown to induce programmed cell death (PCD, apoptosis) in various tumor cell fines in vitro. This study was performed to know how ginsenoside Rc affect on SK-MEL-28 cell line, and how they induce the apoptosis. SK-MEL-28 cell lines were treated with various concentrations of ginsenoside Rc and cultured for various times. At cell cycle analysis, cells arrested at G2/M phase by ginsenoside Rc and apotosis percentage increased along with increasing concentration and time. TUNEL assay was performed to know whether SK-MEL-28 cell fine die as apoptosis or necrosis by ginsenoside Rc. As a result, fluorescence increased along with increasing time and concentration. Fas expressed on SK-MEL-28 cell lines membrane by ginsenoside Rc was identified using flow cytometer. Ginsenoside Rc induced apoptosis against SK-MEL-28 cell fines, and the apoptosis mechanism was identified as Fas-mediated apotosis.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.5
• /
• pp.919-923
• /
• 2004

The sk10 isolated from kimchi was identified as W. kimchii on the basis of l6s-rDNA sequencing. Studies were made to analyze the metabolic flux shift of the sk10 on glucose under aerobic growth conditions. The sk10 produced 38.2 mM acetate, 16.3 mM ethanol, and 33.2 mM lactate under aerobic conditions, but 2.4 mM acetate, 48.0 mM ethanol, and 44.1 mM lactate under anaerobic conditions. The NADH peroxidase (NADH-dependent hydrogen peroxidase) activity of sk10 grown under aerobic conditions was 11 times higher than that under anaerobic conditions. Under the low ratio of $NADH/NAD^+$, the metabolic flux toward lactate and ethanol was shifted to the flux through acetate kinase without NADH oxidation. The kinds of enzymes and metabolites of sk10 were close to those in the pathway of Leuconostoc sp., but the metabolites produced under aerobic growth conditions were different from those of Leuconostoc sp. The stoichiometric balance calculated using the concentrations of metabolites and substrate was about 97%, coincident with the theoretical values under both aerobic and anaerobic conditions. From these results, it was concluded that the metabolic flux of W. kimchii sk10 was partially shifted from lactate and ethanol to acetate under aerobic conditions only.

• Proceedings of the SCSK Conference
• /
• 2003.09a
• /
• pp.540-567
• /
• 2003

Metabolic disease such as diabetes, which is caused by stress or imbalanced diet, has been increasing. A diabetic tend to suffer from a delay or difficulty of wound healing. The extract of SHIKON (SK), that is the root of Lithospermun erythrorhison, has been reported to have an effect on healing for normal wound, but has never studies for intractable wound so far. Therefore we examined the effect of SK extract on wound healing with healing impaired mouse model. Full-thickness round wounds were created on the backs of db/db mice and applied SK, and we observed neovascularization and collagen synthesis, distribution of apoptotic cells, and vascular endothelial growth factor (VEGF)- positive cells in granulation tissue. After two weeks, a number of capillary vessel and collagen synthesis were increased in SK-treated wounds. Infiltration of VEGF-positive neutrophils was also seen in the wound, besides apoptotic fibroblasts and endothelial cells were appeared in the granulation tissue. After three weeks, the wound closed completely with SK-treated but not in control. These results suggest that SK enhanced neovascularization by VEGF and this kind of apoptosis process makes the scar smooth. In this study, it is obvious that SK also accelerates healing of intractable wound.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1998.11a
• /
• pp.76-80
• /
• 1998

In order to identify the cause of ground water drawdown of a piezometer installed around the LPG storage cavern, parameter estimations were conducted by inverse and forward numerical models. An inverse model, SK-EST developed by SK Engineering & Construction Co., Ltd.(SKEC,1997) was performed to estimate the change of the hydraulic conductivity. It was verified by the commercial forward model, AQUA3D (VATNASKIL,1995). The simulation results showed that the hydraulic diffusivity of the rock mass between the piezometer and the cavern had been increased and the change rate of the hydraulic head had been abruptly increased in response to the change of the operation pressure. Finally the statistical analysis for observed data showed the increase of the change rate of the hydraulic head and thus proved the applicability of SK-EST.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.409-414
• /
• 2009

The SK Chemical R&D center is an eco-friendly building designed as top score in the GBCC(GREEN BUILDING CERTIFICATE CRITERIA). This building has applied various eco-friendly technologies such as energy /water resource cutdown, improvement of indoor quality and improvement of user convenience, etc through eco-friendly concept from the design phase. In this thesis, an economic efficiency evaluation has been performed on building energy cwater resource cutdown technologies among them and the results are as follows. The building energy has cut down about 40% compared to ordinary buildings and the investment recovery period was shown as about 5 years. The water resource has cut down about 63% compared to ordinary buildings and the investment recovery period was shown as about 10 years.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.95-96
• /
• 2006

This study examined the effects of the tempering temperatures($360-420^{\circ}C$) on the mechanical properties of the carbon tool steel (SK4M) for flat spring. Hardness test, tensile test and fatigue test were performed at room temperature($20^{\circ}C$). The tensile strength and yield strength of $390^{\circ}C\;and\;420^{\circ}C$ tempered SK5M were 0.93-0.97 times and 0.81-0.87 times those of $360^{\circ}C$ tempered SK5M, respectively. The fatigue limit of $360-420^{\circ}C$ tempered SK5M were 35-40% of tensile strength of $360-420^{\circ}C$ tempered SK5M, respectively.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.693-696
• /
• 2002

This study examined the effects of the testing temperature on the mechanical properties of the carbon tool steel (SK4M) for flat spring. Hardness test and fatigue test were performed at room temperature ($20^{\circ}C$). Tensile test and creep test were performed at temperature range $20^{\circ}C$ ~$160^{\circ}C$. The micro-vickers hardness values of SK4M was Hv=584. The Elastic modulus, tensile strength and yield strength of SK4M at 160t test temperature were decreased 0.92 time, 0.97 time and 0.82 time those of SK4M at 2$0^{\circ}C$ test temperature, respectively. The maximum creep strain for 100hr at creep temperature ($80^{\circ}C$ ~$160^{\circ}C$) and creep stress ($37.4Kgf/\textrm{mm}^2$ ~$93.6Kgf/\textrm{mm}^2$) was 0.572%. The fatigue limit of SK4M was $94Kgf/\textrm{mm}^2$.