• Journal of electromagnetic engineering and science
• /
• v.12 no.1
• /
• pp.122-127
• /
• 2012

Post-wall waveguide structures have attracted a great deal of attention for micro- and millimeter-wave applications. One of the waveguide’s applications is a slotted waveguide array. In order to design the slotted array, the characteristics of a slot unit alone on the post-wall waveguide should be investigated. In this paper, a method for extracting the S-parameters of a unit slot is proposed. This simple method requires only two kinds of waveguides: waveguides without a slot unit and waveguides with a slot unit. Three kinds of slot units are fabricated, and the extracted results show a high level of agreement with predicted (simulated) results. With this method, the equivalent slot length can also be found.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.485-488
• /
• 2005

The 2nd KOrea Multi-Purpose Satellite (KOMPSAT -2) has been developed by Korea Aerospace Research Institute (KARI) since 2000. Multi Spectral Camera (MSC) is the payload for KOMPSAT -2, which will provide the observation imagery around Korean peninsula with high resolution. KOMPSAT-2 has adopted X-band Tracking System (XTS) for transmitting earth observation data to ground station. For this, data which describes and controls the pre-defined motion of each on-board X-Band antenna in XTS, must be transmitted to the spacecraft as S-Band command and it is called as Tracking Parameter Files (TPF). In this paper, the result of the development of TPF Generation S/W for KOMPSAT-2 X-Band Antenna Motion Control.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.602-605
• /
• 2007

COMS SOC is supposed to operate IDACS as a backup of MSC. For the backup operation, there is a route between SOC and MSC for exchanging current version such as radiometric calibration for IMPS, dissemination schedule, encryption key and conversion table for LHGS. DATS C&M S/W is basically designed to control and monitor DATS equipment. However, its capability is extended to monitor the working status of IMPS, LHGS and even MSC IDACS. In addition, DATS C&M SIW can display discrepancy between MSC and SOC when applied version is different each other. This paper presents detailed description on the development of DATS C&M S/W.

• Journal of electromagnetic engineering and science
• /
• v.17 no.1
• /
• pp.29-33
• /
• 2017

This paper proposes a half-mode substrate integrated waveguide (HMSIW) amplifier using lumped-element transition. The input and output impedances of this amplifier are matched by the lumped-element transition structure. This structure provides compact impedance and mode matching circuits between the HMSIW and a stand-alone amplifier. Surface mount technology inductors and capacitors are implemented to realize the lumped-element transition. A prototype of the proposed HMSIW amplifier shows 15 dB gain with 3 dB bandwidth of 4 to 7.05 GHz in a simulation and measurement.

• Journal of electromagnetic engineering and science
• /
• v.5 no.3
• /
• pp.140-145
• /
• 2005

In this paper, an experimental investigation for return loss and a software-based prediction for interference level of single-packaged filtering antenna composed of dielectric waveguide filter and PCB(Printed Circuit Board) slot antenna in transceiver module have been carried out with several different feeding structures in millimeter-wave regime. The implementation and embedding method of the existing air-filled waveguide filters working at millimeter-wave frequency on general PCB substrate have been described. In a view of the implementation of each components, the dielectric waveguide embedded in PCB and LTCC(Low Temparature Co-fired Ceramic) substrates has employed the via fences as a replacement with side walls and common ground plane to prevent energy leakage. The characteristics of several prototypes of filtering antenna embedded in PCB substrate are considered by comparing the wideband and transmission characteristics as a function of bent angle of transmission line connecting two components. In addition, as an essential to the packaging of transceiver module working at millimeter-wave, miniaturization technology maintaining the performances of independent components and the important problems caused by integrating and connecting the different components in different layers are described in this paper.

• ETRI Journal
• /
• v.32 no.2
• /
• pp.195-203
• /
• 2010

A new vertical transition between a substrate integrated waveguide in a low-temperature co-fired ceramic substrate and an air-filled standard waveguide is proposed in this paper. A rectangular cavity resonator with closely spaced metallic vias is designed to connect the substrate integrated waveguide to the standard air-filled waveguide. Physical characteristics of an air-filled WR-22 to WR-22 transition are compared with those of the proposed transition. Simulation and experiment demonstrate that the proposed transition shows a -1.3 dB insertion loss and 6.2 GHz bandwidth with a 10 dB return loss for the back-to-back module. A 40 GHz low-temperature co-fired ceramic module with the proposed vertical transition is also implemented. The implemented module is very compact, measuring 57 mm ${\times}$ 28 mm ${\times}$ 3.3 mm.

• Journal of Advanced Navigation Technology
• /
• v.14 no.1
• /
• pp.11-19
• /
• 2010

In this paper, H-plane filtering-horn antenna operating at millimeter frequency band is proposed with embedded filter and three-layered dielectric lens for frequency selection and maintenance of main beam direction, respectively. The waveguide-typed filter and H-plane sectoral horn antenna are replaced with considerably size-reduced PCB substrate-typed filtering antenna using via fences and several posts. The waveguide-typed filter and H-plane sectoral horn antenna were designed in air-filled waveguide and then combined into size-reduced PCB substrate. For the control of the thickness of dielectric lens, single and multi dielectric lens have been employed. As a result of antenna gain, 8 and 13.5 dBi have been obtained at 41.5 GHz, respectively, from the simulations of single and multi-lens antennas.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.6
• /
• pp.580-588
• /
• 2009

A Missile Warning Radar is an essential sensor for active protection system to detect antitank missile in all weather environments. This paper presents the design, development, and test results of L-band pulsed Doppler radar system for main battle tank. This radar system consists of 3 LRUs, which include antenna unit, transmitter and receiver unit and radar signal & data processing unit. The developed core technologies include the patch antenna, SSPA transmitter, coherent I/Q detector, DSP based Doppler FFT filter, adaptive CFAR, SIW tracking capability, and threat decision. The design performance of the developed radar system is verified through various ground fixed and moving vehicle test.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.1
• /
• pp.10-18
• /
• 2014

In this paper, we propose a new frequency reconfigurable dual-band antenna. By using an electronically compact eighth-mode substrate-integrated-waveguide(EMSIW) resonator, we have designed a compact antenna, which performs dual-band movement by additionally loading a complementary split ring resonator(CSRR) structure. The EMSIW and CSRR structures are designed to satisfy the bandwidths of 1.575 GHz(GPS) and 2.4 GHz(WLAN), respectively. We load the CSRR with a varactor diode to allow a narrow bandwidth and to enable the resonance frequency to continuously vary from 2.4 GHz to 2.5 GHz. Thus, we realize a channel selection function that is used in the WLAN standards. Irrespective of how a varactor diode moves, the EMSIW independently resonates so that the antenna maintains a fixed frequency of the GPS bandwidth even at different voltages. Consequently, as the DC bias voltage changes from 11.4 V to 30 V, the resonance frequency of the WLAN bandwidth continuously changes between 2.38 GHz and 2.5 GHz, when the DC bias voltage changes from 11.4 V to 30 V. We observe that the simulated and the measured S-parameter values and radiation patterns are in good agreement with each other.

• Korea journal of population studies
• /
• v.28 no.2
• /
• pp.131-164
• /
• 2005

The central focus of this research paper is to explore the recent structural core empirical unemployment reason of IT new professional manpower who graduated in higher education level in Korea. The final goal of this issue is to estimate and analyze rambling impediment in IT manpower labor market between 26 detail occupations and between detail occupations and 3 educational levels of new graduates and entrants who entered in IT 6 occupational groups composing 26 particular occupations. This study uses the 2004 data published by the Ministry of ICT and relies upon both one-way analysis of variance and two-way analysis variance to tackle the issue. According to the ANOVA results, 2 main points were delineated In the one-way analysis of variance method. the total sum of squares (SST) is decomposed into two major components: within sum of squares (SSW) (6 detail occupations, 85%) and between sum of squares (SSG) (26 detail occupation, 15%) The other major finding is that total sum of squares (SST) is decomposed into three major components: between detail occupations (SSG) (19.3%), between educations (SSB) and errors (SSE) (56%) in IT SIW development design group.