• Journal of the Korean Geotechnical Society
• /
• v.19 no.1
• /
• pp.51-60
• /
• 2003

As piling works in urban area are increasing, SIP which has low noise & vibration piling method takes the place of driven pile which has good bearing charateristics and is economical. Although SIP has been used far more than 15 years and it's use is increasing year by year, accurate analysis of bearing mechanism of SIP is not enough. So the design of SIP is much more conservative than driven pile. This paper is aimed at analysing the bearing charateristics of 103 SIPs constructed in Korea to give rational design criteria. Research result shows that bearing capacity of SIP is 40% lower than that of driven pile and conservative Meyerhof(20$\bar{N}_b'A_b$) method produced closer result to load test results than any other design method. And this result shows that in order to use optimised design criteria for the economical SIP design, quality control criteria must be settled down to produce high bearing capacity.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.583-588
• /
• 2002

As environmental problem in course of construction has been a matter of interest, noise and vibration in the process of piling are considered as a serious problem. For this reason, the use of SIP method inserting pile as soon as boring and cement grouting is rapidly increasing for preventing vibration and noise. But a resonable bearing capacity formula for SIP method does not exit and even the standard specification for domestic condition isn't formed, though the lateral friction between cement paste and the ground does an important role and boring depth largely influences to the design bearing capacity, applying the SIP method . Therefore, the lateral friction was analyzed after the direct shear test worked with the lateral face of SIP and the soil.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4B
• /
• pp.411-423
• /
• 2004

This paper defines test methodologies and performance indices for SIP server system, and describes elements that can have influence on the test of SIP network equipments. Moreover, we implement a tester to evaluate the performance of SIP Servers such as Registrar and Proxy server. The performance indices for testing SIP servers are message processing rate, transaction delay, and call success probability. The parameters that can have an effect on the performance of SIP servers are user population, transport protocol, method of database access, method of DNS, call creation pattern, definition of transactions, and size of packets. We tested several SIP servers that act as Registrar, Proxy, and Redirect server using the implemented SIP tester, and, as a result, verified functions of the tester and performance indices and input parameters defined in this paper. Performance indices and methodologies presented in this paper can be used to evaluate SIP servers in NGN

• Proceedings of the Korea Contents Association Conference
• /
• 2004.05a
• /
• pp.342-347
• /
• 2004

The VoIP(Voice over Internet Protocol) technology which is able to use a voice service through internet is more cheaper then existing telephone charges, and is easily accept the various of multimedia services from internet. Previous connection method of VoIP used H.323 protocol, but it is very complex to connection establishment. so, the SIP(Session Initiation Protocol) protocol that propose in SIP-Working Group Is in use recently. Therefore, we need new interworking methodology between H.323 and SW products. In this thesis, the progress interworking method between H.323 and SIP are propose, then interpret unnecessary packet delay for call setup and improved feature of message exchange.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.7
• /
• pp.3287-3295
• /
• 2011

Currently in construction Soil-cement Injected Precast pile of buried pile method are in wide use. But deterioration in pile quality and faulty construction can be often found these days because of problems arise in the construction field. For this study, survey was carried out by targeting construction engineers working in the field in order to identify the types and the causes of problems arise based on SIP(Soil-cement Injected Precast) method. By analyzing the causes of problems arise, countermeasures could be presented. The data and the analysis presented in the study could be effectively used for minimizing problems arise in future during SIP method construction.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1996.10a
• /
• pp.295-302
• /
• 1996

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.05a
• /
• pp.1481-1484
• /
• 2004

SIP Proxy 서버는 SIP UA가 전송하는 대량의 Call 메시지를 처리해야 한다. SIP Proxy 서버가 SIP UA에 의해 전송된 Call Message를 처리 하기 위해서는 Registrar 서버에 등록 되어 있는 UA들의 정보를 빠르게 검색하여 처리해야 한다. 본 논문에서는 SIP Proxy 서버가 Registrar 서버에 등록 되어 있는 SIP UA에 대한 접속 정보를 빠르게 처리하기 위해 SIP Proxy 서버와 Registrar 서버에 UA 정보용 cache를 도입할 것을 제안 하며, SIP Proxy 서버와 SIP UA의 상호 동작 패턴을 적용한 SIP UA 정보 캐슁 기법에 대해서 제안 한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.10a
• /
• pp.201-207
• /
• 2010

In this study, the SIP (Soil-cement Injected precast Pile) method among the Low-vibration & Low-noise pile driving methods was decided into study compensation. Ground vibrations by the SIP methods step by step divide and were analyzed. Quantitative response values and ground vibration equations with reliability were presented from findings of this study. Also, vibration responses that are occurred by the SIP method of construction were compared as quantitative with vibration responses by general method of construction that are presented in existent study. Ground vibration values by the SIP method correspond to level of 17 ~ 57% of values that are assumed by the Attewell & Famer's equation, respectively, and these result compares in reliability 50% and separated distance 10 ~ 50 m. Also, those values were analyzed that correspond to level of 14 ~ 96% of ground vibration values by the Prof. Park's equation, respectively. Construction limit extents, separation distances from vibration occurs position, were presented that can satisfy domestic criteria for vibration control for the SIP methods. Those presented in this paper were divided newly according to reliability.

• Journal of Korea Multimedia Society
• /
• v.15 no.8
• /
• pp.1038-1047
• /
• 2012

The SIP(Session Initation Protocol) is an application layer protocol that is used to establish, release, and change the call session of the IP telephony. In the SIP signalling networks, when the number of the UA(User Agent) requested the call session increase, the number of messages to be processed by SIP proxy server increase. It often will be caused the overload of the SIP proxy server. In this paper, we proposed the overload control method with a normal queue and a delay queue in the SIP proxy server. When it is estimated the overload of the server by the excess of the high threshold in the normal queue, new INVITE messages will be put into the delay queue to reduce the load of the server. It results in some delay of the call session from the INVITE message. Subsequently when the number of messages in the normal queue is reduced below the low threshold, the INVITE messages in the delay queue is processed. The simulation results showed that the number of the retransmission messages by our proposed method was 45% less than the one by the method with single queue. The results also showed that the average call success rate by the proposed method was 2% higher than the one by the method with single queue.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.176-179
• /
• 2003

The use of Multiparty Conference service based on SIP for VoIP provides is gradually magnified, and the work for continuous development and standardization on SIP is in the process of advancing. But, currently it is impossible for SIP to support identity discovery and distribution of each participant for multiparty conference. In this paper, we propose a SIP extension for guaranteeing security on the multiparty conference using SIP by adding new method and reconstructing header informations. With this, it is also possible to identify discovery and to distribute each participant using SIP extension when a call is established for closed multiparty conference.