• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.736-741
• /
• 2006

In this study, a ubiquitous sensor for condition monitoring of insulators and lightning arresters installed in power distribution lines and electric traction vehicles is presented. The sensor consists of two parts; a leakage current measurement and a lightning surge detection. Measured data are transmitted to a supervisory computer through ZigBee protocol based on IEEE 802.15.4. To detect leakage current, a window type Mn-ZCT is used and a low-noise amplifier with a gain of 60dB is designed, and this can measure leakage current in ranges of $100{\mu}A{\sim}5mA$. A sample-hold(S/H) and a Rogowski coil are injected to analyze the magnitude of surge current in ranges from 500A to 10kA with $8/20{\mu}s$-waveform.

• Journal of IKEEE
• /
• v.19 no.3
• /
• pp.311-318
• /
• 2015

This dissertation proposes method for development technology of voice and SMS(Short Message Service) alarming system based on modbus protocol. The proposed technology is composed of the following 3 stages; hardware development based on microprocessor, development of input and output driver for modem, mp3 decoder, making modbus protocol stack. In the stage of hardware development based on microprocessor, we develop hardware which receives alarm from modbus master and transmit sms message, play mp3. In the stage of development of input / ouput device driver such as modem, mp3 decoder, we develop program which control each devices. In the stage of making modbus protocol stack, voice and sms alarm system is made for receiving alarm via modbus protocol. To evaluate performance of proposed technology, we issued alarm to voice and sms alarming system on purpose. As a result, response speed of detecting alarm was 10.7ms, communication distance was 1.2Km, operating temperature was from $-25^{\circ}C$ to $70^{\circ}C$, we confirmed supporting modbus protocol. And we verified that proposed voice and sms alarming system in the thesis has a performance to be used as an industrial building alarming system.

• Aerospace Engineering and Technology
• /
• v.12 no.1
• /
• pp.120-127
• /
• 2013

Recently, In Aerospace area the interest of open source software is increasing. One of examples is celestia that is used for visualizing space environment with 3D. Celestia that is open source software has many advantages. First is very easy to use, second is that it can extend new features easily with script language. It is very useful to extend with other systems. But, celestia has a few of remote control features from remote site. In this paper I describe design and implementation of remote control module using UDP communication protocol between celestia and GenSim that is satellite simulation software developed by KARI and describe the problem and solution items are found during development duration.

• Journal of Korea Society of Industrial Information Systems
• /
• v.13 no.5
• /
• pp.168-177
• /
• 2008

The code propagation is one of the most important technic for software update in wireless sensor networks. This paper presents a new scheme for code propagation using network coding. The proposed code propagation method roughly shows 20$\sim$25% performance improvement according to network environments in terms of the number of data exchange compared with the previously proposed pipelining scheme. As a result, we can efficiently perform the software update from the viewpoint of speed, energy, and network congestion when the proposed code propagation system is applied. In addition, the proposed system solves the overhearing problems of network coding such as the loss of original messages and decoding error using the predefined message. Therefore, our system allows a software update system to exchange reliable data in wireless sensor networks.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.4
• /
• pp.127-132
• /
• 2008

Wireless sensor network technologies applicable to various industrial fields are rapidly growing. Because it is difficult to change a battery for the once distributed wireless sensor network, energy efficient design is very critical. In order to achieve this purpose in network design, a number of studies have been examining the energy efficient routing protocol. The sensor network consumes energy in proportion to the distance of data transmission and the data to send. Cluster-based routing Protocols such as LEACH-C achieve energy efficiency through minimizing the distance of data transmission. In LEACH-C, however, the total distance between the nodes consisting the clusters are considered important in constructing clustering. This paper examines the cluster-head-selection-algorithm that reflect the distance between the base station and the cluster-head having a big influence on energy consumption. The Proposed method in this paper brought the result that the performance improved average $4{\sim}7%$ when LEACH-C and the base station are located beyond a certain distance. This result showed that the distance between cluster-head and the base station had a substantial influence on lifetime performance in the cluster-based routing protocol.

• The Korean Journal of Pesticide Science
• /
• v.6 no.4
• /
• pp.309-319
• /
• 2002

Soil adsorption study was carried out to define the mobility of pesticides or to evaluate leaching potential in soils. Five pesticides including ethoprophos, procymidone, iprobenfos, isoprothiolane, and butachlor were subjected to optimized adsorption experiment protocol for three types of cultivation soils. Freundlich adsorption coefficients (K) were ranged $0.35{\sim}0.95$ for ethoprophos, $0.98{\sim}2.2$ for iprobenfos, $1.2{\sim}4.3$ for procymidone, $1.5{\sim}3.5$ for isoprothiolane and $7.9{\sim}19$ for butachlor in three soils. Based on Koc values, ethoprophos was classified as mobile, iprobenfos, isoprothiolane and procymidone as moderately mobile and butachlor as slightly mobile. Two evaluation methods, Groundwater Ubiquity Score (GUS) index and standard indices of soil-chemical adsorption and biodegradation, were used for the estimation of pesticide leaching potential. Leachability of isoprothiolane and iprobenfos were evaluated as moderate, ethoprophos as a little potential, while butachlor and procymidone showed very low leaching potential. The leaching potential of pesticides was essentially determined on the basis of intrinsic properties of the pesticides and environmental properties. Among the soil properties, organic matter gave a great influence on the leachability of soils. Therefore, leachabilities of pesticides were expected less in loam with relatively higher organic matter than clay loam with lower organic matter.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.15 no.1
• /
• pp.17-23
• /
• 2015

Background: Dental injury as a result of oroendotracheal intubation during general anesthesia is very common. We report our experiences of using mouthguard to prevent dental injury during intubation based on our protocol. Methods: This retrospective study enrolled patients referred for preanesthetic evaluation, those patients with a history of any of the dental treatments to their anterior teeth listed on our fabrication protocol from January 1, 2009 to June 30, 2010. Results: No cases of dental trauma during oroendotracheal intubation were reported among the 202 patients who used a protective device. 66% of the patients had risk factors for hard tissue damage aged 10-40 years. At the ages of 40-70 years, the incidence of risk group for periodontal damage was higher. Conclusions: Preanesthetic consultation was effective for preventing dental injury, so preanesthetic questionnaire and proper dental consultation would be helpful.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.4
• /
• pp.808-815
• /
• 2017

We demonstrated the quantitative detection of a toxin-producing Microcystis aeruginosa (M. aeruginosa) strain with the laboratory protocol of the NanoGene assay. The NanoGene assay was selected because its laboratory protocol is in the process of being transplanted into a portable system. The mcyD gene of M. aeruginosa was targeted and, as expected, its corresponding fluorescence signal was linearly proportional to the mcyD gene copy number. The sensitivity of the NanoGene assay for this purpose was validated using both dsDNA mcyD gene amplicons and genomic DNAs (gDNA). The limit of detection was determined to be 38 mcyD gene copies per reaction and 9 algal cells/ml water. The specificity of the assay was also demonstrated by the addition of gDNA extracted from environmental algae into the hybridization reaction. Detection of M. aeruginosa was performed in the environmental samples with environmentally relevant sensitivity (${\sim}10^5$ algal cells/ml) and specificity. As expected, M. aeruginosa were not detected in nonspecific environmental algal gDNA over the range of $2{\times}10^0$ to $2{\times}10^7$ algal cells/ml.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10d
• /
• pp.317-322
• /
• 2007

IPv6 이동성 관리를 위한 기존의 호스트 기반 프로토콜인 Mobile IPv6는 오랜 기간 동안 많은 연구에 의해 표준화되어진 안정적인 기술이지만 실제 상용망에서는 잘 사용이 안되고 있다. 그 이유는 단말의 수정 요구, 과도한 유/무선 자원 사용, 느린 핸드오버 지연시간 등이 있다. 이와 같은 Mobile IPv6의 단점을 극복하기 위하여 개발된 네트워크 기반 이동성 관리 프로토콜인 Proxy Mobile IPv6가 최근에 주목받고 있다. Proxy Mobile IPv6는 단말에서의 이동성 지원을 위한 수정이 필요하지 않으며, 유/무선 자원도 효율적으로 사용하며, 핸드오버 지연시간도 단축된다는 장점을 지니고 있다. 본 논문에서는 Proxy Mobile IPv6와 기존 호스트 기반 프로토콜인 Mobile IPv6, Hierarchical Mobile IPv6를 체계적으로 분석하고 핸드오버 지연시간을 비교 분석한다. 비교 분석 결과로서 Proxy Mobile IPv6는 기존 기법들보다 약 $84{\sim}93%$ 정도의 핸드오버 지연시간 단축이 있음을 알 수 있다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.8
• /
• pp.671-677
• /
• 2016

A Controller Area Network (CAN) is a serial communication protocol that is highly reliable and efficient in many aspects, such as wiring cost and space, system flexibility, and network maintenance. Therefore, it is chosen for the communication protocol between a single chip controller based on Field Programmable Gate Array (FPGA) and peripheral devices. In this paper, the design and implementation of CAN IP, which is written in VHSIC Hardware Description Language (VHDL), is presented. The implemented CAN IP is based on the CAN 2.0A specification. The CAN IP consists of three processes: clock generator, bit timing, and bit streaming. The clock generator process generates a time quantum clock. The bit timing process does synchronization, receives bits from the Rx port, and transmits bits to the Tx port. The bit streaming process generates a bit stream, which is made from a message received from a micro controller subsystem, receives a bit stream from the bit timing process, and handles errors depending on the state of the CAN node and CAN message fields. The implemented CAN IP is synthesized and downloaded into SmartFusion FPGA. Simulations using ModelSim and chip test results show that the implemented CAN IP conforms to the CAN 2.0A specification.