• 한국결정성장학회지
• /
• 제6권3호
• /
• pp.392-398
• /
• 1996

$Si_{3}N_{4}$에 평균입경이 다른 SiC 분말을 0, 10, 20, 30, 40 vol% 첨가하여 고온가압소결법으로 초미립복합재료를 제조하였다. SiC의 첨가량에 따라 $Si_{3}N_{4}$의 결정립성장이 억제되어 원형의 미세한 결정립들이 많아졌다. 이러한 경향은 평균입경이 작은 SiC를 사용한 조성에서 현저하게 나타났다. 이에 따라 파괴강도와 경도는 작은 SiC를 첨가한 시편에서 높은 값을 나타냈으며, 파괴인성은 낮았다.

• 한국세라믹학회지
• /
• 제31권10호
• /
• pp.1089-1098
• /
• 1994

The effect of Si3N4 addition on the microstructure and PTCR characteristics of BaTiO3 was studied. When 0.1 mol% Sb2O3-doped BaTiO3 codoped with Si3N4 (0.1, 0.25, 0.5, 0.75, and 1 wt%, respectively) were sintered, their microstructures were changed by the amount of the liquid phase as a result of eutectic reaction at 126$0^{\circ}C$. By these microstructural changes, the specific resistivity ratio($\rho$max/$\rho$min) with Si3N4 content variation of 0.1 mol% Sb2O3-doped BaTiO3 ceramics sintered at 130$0^{\circ}C$ for 1 hour varied between 3.70$\times$102(0.1 wt% Si3N4) to 1.16$\times$103 (1wt% Si3N4).

• 한국세라믹학회지
• /
• 제36권5호
• /
• pp.547-554
• /
• 1999

The self-reinforced Si3N4 ceramics were prepared by pressureless-sintering using ${\beta}$-Si3N4 whiskers as a seed. Effects of ${\beta}$-Si3N4 whiskers on microstructure and mechanical properties and the ${\alpha}$ to ${\beta}$ phase transition of Si3N4 were investigated. The self-reinforced Si3N4 ceramics were densified(relative density$\geq$98%) by pressureless-sintering (1800$^{\circ}C$ 2h) using 8mol% Y2O3 and 6mol% Al2O3 as sintering aids and 5 vol% ${\beta}$-Si3N4 whiskers within self-reinforced Si3N4 ceramic seemed to hinder the densification owing to their acicular shapes but accelerated the ${\alpha}$ to ${\beta}$ phase transition because they acted as pre-existing nuclei. It was found that the more ${\beta}$-Si3N4 nucei the faster ${\alpha}$ to ${\beta}$ phase transition.

• 한국세라믹학회지
• /
• 제43권10호
• /
• pp.595-600
• /
• 2006

The preparation of $\beta$-SiAlON powder by SHS in the system of $Si-Al-SiO_2-NH_4F(\beta-Si_3N_4)$ was investigated in this study. In the preparation of SiAlON powder, the effect of gas pressure, compositions such as Si, $NH_4F$, \beta-Si_3N_4$ and additive in mixture on the reactivity were investigated. At 50 atm of the initial inert gas pressure in reactor, the optimum composition for the preparation of pure $\beta$-SiAlON was $3Si+Al+2SiO_2+NH_4F$. The $\beta$-SiAlON powder synthesized in this condition was a single phase $\beta$-SiAlON with a rod like morphology.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2002년도 춘계학술발표회 초록집
• /
• pp.49-49
• /
• 2002

독립된 티타늄(Ti)과 실리콘(Si) 타켓을 사용하여 DC reactive magnetron co-sputtering 공 정으로 Ti-Si-N 코탱막을 SKD 11 합금강위에 합성하였다. 고분해능 TEM 및 XPS 분석들로부터 Ti-Si-N 코탱막은 나노미터 크기의 TiN결정체들이 비정질 Si3N4 기지에 분산된 나노복합체의 마세구조를 냐타내었다. 코탱막의 경도는 11 at.%의 Si 함량에서 39 GPa의 최 고 경도값을 나타내었고 이 경우 미셰조직은 5nm 크기의 미세한 TiN 결정이 비정절상의 기지에 균일하게 분포된 특성을 보였다 .. Ti-Si-N 박막내에 Si 함량이 증가할수록 TiN 결정 상들은 다배향성을 나타내었고 크기가 감소하였으며 비정질상에 의해 완전히 둘려싸언 형상 으로 변화하였다. 높은 Si 함량에서는 질소 소스의 부족현상에 의하여 코팅막내에서 free Si 가 나타났다. 상대습도가 증가함에 따라 Ti-Si-N 코탱막의 마찰계수와 마모량이 현저하게 감소하였다. 강재에 대한 Ti-Si-N 코팅막의 마모거동에 있어서 Si02 냐 Si(OH)2 같은 얇은 윤활막의 형성이 중요한 역할을 하는 것으로 판단되어졌다.

• 한국재료학회지
• /
• 제15권3호
• /
• pp.177-182
• /
• 2005

Large amounts of the waste SiC sludge containing small amounts of Si and organic lubricant were produced during the wire cutting process of the single silicon crystal ingots. The waste SiC sludge was purified by the washing process and the purified SiC powders were used to fabricate continuously porous $SiC-Si_3N_4$ composites using a fibrous monolithic process, in which carbon, $6wt\%\;Y_2O_3-2\;wt\%\;A1_2O_3$ and ethylene vinyl acetate were added as a pore-forming agent, sintering additives, and binder, respectively. In the burning-out process, carbon was fully removed and continuously porous $SiC-Si_3N_4$ composites were successfully fabricated. The green bodies containing SiC, Si particles and sintering additives were nitrided at $1410^{\circ}C$ in a flowing $N_2+10\%\;H_2$ gas mixture. Continuously porous composites were combined with SiC, ${\alpha}Si_3N_4,\;\beta-Si_3N_4$ and a few $\%$ of Fe phases. The pore size of the 2nd and the 3rd passed $SiC-Si_3N_4$ composites was $260\;{\mu}m$ and $35\;{\mu}m$ in diameter, respectively.

• 한국세라믹학회지
• /
• 제37권3호
• /
• pp.280-287
• /
• 2000

Adsorption behavior and amount of phenolic resin followed silica (SiO2) formation onto silicon nitride(Si3N4) surface were investigated using electrokinetic sonic amplitude (ESA) technique and with UV spectrometer, to fabricate Si3N4/SiC nano-composite based on reaction between SiO2 formed and phenolic resin absorbed onto Si3N4 particle. The amount of SiO2 formed and carbon from phenolic resin absorbed onto Si3N4 surface were calculated quantitatively to adjust the reaction between SiO2 and phenolic resin, resulting in no residual SiO2 and carbon. As a result, pre-heated tempeature for optimized reaction was below 25$0^{\circ}C$, in which there was no residual SiO2 and carbon.

• 한국재료학회지
• /
• 제5권7호
• /
• pp.835-841
• /
• 1995

Si$_3$N$_4$가 추진기관 연소조건 하에서 흑연의 산화와 마모를 효과적으로 방지하는 다층 코팅재료로 쓰일 수 있도록 하기 위하여 저압화학기상증착법(LPCVD)으로 Si$_3$N$_4$를 코팅할 때의 증착특성에 대해 연구하였다. 흑연 위에 pack cementation방법으로 SiC를 코팅하고 그 위에 저압화학기상증착법으로 Si$_3$N$_4$를 코팅 하였으며, 증착온도와 반응기체입력비를 변화시키면서 이에 따른 증착속도와 표면형상의 변화를 관찰하였다. 증착속도는 증착온도가 높아짐에 따라 처음에는 증가하다가 최대값을 나타낸 후 감소하는 경향을 나타냈으며, 그레인의 크기는 증착온도가 높아짐에 따라 작아지는 경향을 보였다. 한편, 반응기체의 입력비가 20$\leq$NH$_3$/SiH$_4$$\leq$40인 조건에서는 증착속도의 변화나 표면형상의 변화를 관찰할 수 없었다. 증착온도 800~130$0^{\circ}C$ 범위에서 증착된 Si$_3$N$_4$가 비정질상인 것을 XRD로 확인할 수 있었으며 130$0^{\circ}C$, 질소 분위기에서 2시간 동안 열처리하여 결정상인 Si$_3$N$_4$를 인을 수 있었다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권10호
• /
• pp.464-468
• /
• 2003

The double layers of $SiO_2$/$Si_3$$N_4$ have superior charge storage stability than a single layer of $SiO_2$. Many researchers are very interested in the charge storage mechanism of $SiO_2$/$Si_3$$N_4$ [1,2]. In this paper, the electrical characteristics of thermal oxide and atmospheric pressure chemical vapor deposition (APCVD) of $Si_4$$N_4$ have been investigated and explained using high frequency capacitance-voltage measurements. Additionally, this paper will describe capacitance-voltage characteristics for double layers of $SiO_2$/$Si_4$$N_4$ by "Athena", a semiconductor device simulation tool created by Silvaco, Inc.vaco, Inc.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.304-304
• /
• 2014

Quaternary Ti-Al-Si-N films were deposited on WC-Co substrates by a hybrid deposition system of arc ion plating (AIP) method for Ti-Al source and DC magnetron sputtering technique for Si incorporation. The synthesized Ti-Al-Si-N films were revealed to be composites of solid-solution (Ti,Al)N crystallites and amorphous $Si_3N_4$ by instrumental analyses. The Si addition in Ti-Al-N films affected the refinement and uniform distribution of crystallites by percolation phenomenon of amorphous silicon nitride, similarly to Si effect in TiN film. As the Si content increased up to about 9 at.%, the hardness of Ti-Al-N film steeply increased from 30 GPa to about 50 GPa. The highest microhardness value (~50 GPa) was obtained from the Ti-Al-Si-N film having the Si content of 9 at.%, the microstructure of which was characterized by a nanocomposite of $nc-(Ti,Al)N/a-Si_3N_4$.