• Journal of Life Science
• /
• v.22 no.9
• /
• pp.1180-1186
• /
• 2012

The purpose of this study was to investigate the effect of exercise preconditioning (EPC) on nerve growth factor (NGF), synapsin I, and choline acetyltransferase (ChAT) in the hippocampus of rats subjected to social isolation (SI). We randomly assigned four groups of male Sprague-Dawley (SD) rats (n=32) to the following treatments: GC: group housing control; IC: isolation control; GE: group housing exercise; IE: isolation exercise (n=8 each group). The rats underwent EPC 5 days a week for 8 weeks, and the speed of the treadmill was gradually increased (grade $0^{\circ}C$). After EPC, they were immediately subjected to SI for 8 weeks. The results showed that the protein levels of NGF, synapsin I, and ChAT in the hippocampus were significantly decreased in the IC group (p<0.05) compared with the GC group. However, these protein levels were significantly higher in the IE group (p<0.05). These results show that EPC may buffer the decline of function in the hippocampus by ameliorating the reduction in NGF, synapsin I, and ChAT induced by SI.

• Korean Chemical Engineering Research
• /
• v.49 no.4
• /
• pp.432-437
• /
• 2011

Recently, industry needs a new design of Czochralski(Cz) process for higher productivity with reasonable energy consumption. In this study, we carried out computational simulations for finding out a new optimal design of Cz process with variables which can be applied in real industry such as location of heater, shape of shield and crucible size. Objective process was Cz process which can be produced 8 inch diameter Si ingot for solar cell and we acquired an optimal design for higher productivity, low power consumption with stable production condition. For higher productivity we also change the crucible diameter from 22 inches to 24 inches with changing insulation thickness only because the process housing size could not be changed in industry.

• Journal of Environmental Health Sciences
• /
• v.34 no.1
• /
• pp.20-26
• /
• 2008

The objective of the study which utilised population based data was to determine the respiratory condition of elementary school children in Gangneung. From October 9th to December 14th, 2006, Pulmonary Function Tests (PFT) including Forced Vital Capacity (FVC) and Forced Expiratoy Volume in I Second $(FEV_1)$ were conducted on the target group of children using a spirometer. The prevalence of asthmatic symptoms was 29.8% among boys and 39.6% among girls. By using logistic regression, we found that family history of allergic rhinitis (OR=3.90, CI=1.05-14.51), experience of allergic conjunctivitis (OR=4.67, CI=1.54-14.16) and atopic dermatitis (OR=2.86, CI=1.17-7.05) significantly increased the asthmatic symptoms. Also, a family history of asthma and food allergy were associated with asthmatic symptoms. In relation to housing and environmental risk factors, residences under the ground (OR=3.59, CI=1.35-9.51) and big-size dolls (OR=2.71, CI=0.86-8.53) significantly increased the prevalence of asthmatic symptoms. For PFT, above four families, exposure of passive smoking and pets significantly reduced FVC in both groups (p<0.05). In girls, a big-size doll was significantly associated with decreased lung function (FVC and $FEV_1$). In boys, using bed significantly reduced $FEV_1$. Also, the risk of asthmatic symptoms was found to increase when the house has been built for 5 years or more, the house is close to a road $({\leq}100m)$, a gas/Kerosene heater or carpet is utilized within the house. However, their differences were not significant. It is concluded that genetic factor such as a family history of respiratory disease, allergic symptoms and housing risk factor are related to asthmatic symptoms. These results were worth noting because the findings will help address risk factors related respiratory symptoms especially in relation to housing and environment.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.15-16
• /
• 2012

The estimation of crack damages is studied using the radio frequency system and tilt switch sensors in RC beams. If load is received on the center of the flexible specimen, sensor housing using cement mortar of the flexible specimen will be destroyed, and these are become to send signals of damages at the radio frequency system connected with tilt switch sensors. This study is fundamental research for the estimation of the damage using tilt switch sensors in RC beams.

• Journal of Korea Foundry Society
• /
• v.28 no.4
• /
• pp.190-194
• /
• 2008

Thin-walled die casting of aluminum notebook computer housing with less than 1mm thickness was investigated by using computational solidification simulation and actual casting experiment. Three different types of gate design, finger, tangential and split type, were used and the results showed that sound thin-walled die casting was possible with tangential and split type gating design because those gates allowed aluminum melt flowed into the thin-wall cavity uniformly and split type gating system was preferable gating design than tangential type at the point of view of soundness of casting and distortion generated after solidification. Also, solidification simulation agreed well with the actual die-casting and the casting showed no casting defect and distortion.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.347-348
• /
• 2010

The purpose of this study lies in presenting a methodology to estimate the amount of water to be used in the future by grasping the state of water use in real time based on a statistical analysis using water unit factor application of urban water demand of existing housing, education facilities, and industrial water as well as sensing data by water type. The results of the study would provide in real time the state of water use per water type and the amount of water to be consumed in the future in order to provide basic data for decision-making when planning and managing water facilities based on GIS at times water lacks.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.7
• /
• pp.460-467
• /
• 2010

In housing units constructed recently in Korea, the length of ondol coil is different in each room, so the flow rate of hot water is adjusted by setting valve opening. If the flow rate is not appropriate for heating load, the room temperature seriously deviates from the set temperature range for comfort. In particular, too small valve opening can induce a noise by cavitation. In order to adjust the valve opening, two methods by zone area and a new method by return temperature rise were modelled and simulated using TRNSYS and EES. As a result, heating energy consumption during one week was the same on three methods, but the room temperature of the new method minimally deviated from the range of set temperature with a low possibility of noise.

• Proceedings of the SAREK Conference
• /
• 2004.06a
• /
• pp.124-124
• /
• 2004

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2429-2433
• /
• 2008

A rotary vane blower was developed as an air supply system for fuel cell application. As one way of improving the blower efficiency, a roller was adapted between vanes and cylinder housing. The performance of blower was investigated experimentally. The blower power input was about 115W to compress the air at normal atmospheric condition to 0.2 bar with the flow rate of 140 NLPM, resulting in the blower overall efficiency of 43%. After 400 hours of operation, the performance of blower was not changed. The result showed that developed blower was confirmed to be suitable for fuel cell application.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.2
• /
• pp.133-151
• /
• 2019

This study aims to analyze cold air characteristics in the watershed areas and to suggest strategies for utilizing them in urban ventilation corridor plans. For this purpose, the Jungnangcheon watershed and Uijeongbu-si in the northern part of Gyeonggi province, and Anyangcheon watershed as well as Yangjaecheon Tancheon watershed and Gwacheon-si in the southern part were selected as study areas. We used KALM (Kaltluftabflussmodell), a cold air simulation model developed in Germany and identified both the cold air flow and the height of cold air layer generated during 6 hours at night. Uijeongbu City is located on the main stream of the Jungnangcheon watershed, and the local cold air from the southern outskirts is an important part of Uijeongbu-si's overall ventilation corridor planning. In addition, the cold air generated in the vicinity of Mt. Sapae flows into the central business district near the city hall and plays a major role in regulating the thermal environment of the city. But, the cold air flows in the eastern part of Uijeongbu-si was not smoothly. The cold air flow generated in the east of Gwanak Mountain and in the west of Cheonggye Mountain was the most active in the northern part of Gwacheon-si. This flow is also a major ventilation corridor in Anyangcheon watershed as well as Yangjaecheon Tancheon watershed. But, the southern part where the cold air flow is not smooth is planed to be developed as 'Gwacheon Knowledge Information Town Public Housing District', so rapid development is expected in the future. Hence, it is suggested that an additional ventilation corridor plan should be established based on the detailed local wind flow analysis.