• 제목/요약/키워드: SI Business

검색결과 314건 처리시간 0.021초

경계윤활에서 기계 부품 소재의 트라이볼로지적 특성에 관한 연구 (Study on Tribological Characteristics of Machine Component in Boundary Lubrication)

  • 김명구;서국진;남자현;김대은
    • Tribology and Lubricants
    • /
    • 제35권6호
    • /
    • pp.356-361
    • /
    • 2019
  • The friction and wear between machine components directly influence the energy loss and failure in various machines. Therefore, there is always a demand for finding methods to reduce friction and wear. Of the possible methods, lubrication is a widely used method for reducing friction and wear. In the case of lubrication, it is important to analyze the tribological behavior in the boundary lubrication because most of friction and wear occurs in the boundary lubrication regime. Cast iron has been regarded as a good material for industrial applications due to the excellent mechanical properties and high productivity. Especially, nodular cast iron is a material that shows better mechanical properties and wear-resistance compared with cast iron due to inclusion of spheroidal graphite. In this work, we investigated the tribological characteristics of nodular cast iron with respect to different counter parts in boundary lubrication regime. Sliding tests were conducted with SUJ2, ZrO2, Si3N4 balls as counter parts using a pin-on-disk type tribotester. The results showed different friction and wear behaviors with different counter parts. The case of ZrO2 showed the lowest wear rate in specimen and no significant ball wear. In case of SUJ2, it showed similar wear rate with ZrO2 case in specimen and the highest friction coefficient. The case of Si3N4 showed the lowest friction coefficient, 33% lower than the case of SUJ2. It showed 16.9 times larger wear rate in specimen and 43% larger wear rate in ball compared to that of the SUJ2 case.

Fe-0.7%C-2.3%Si강의 미세조직과 기계적 성질에 미치는 잔류 오스테나이트 변태 거동 (Transformation Behavior of Retained Austenite on Microstructure and Mechanical Properties in Fe-0.7wt%C-2.3wt%Si Steel)

  • 손제영;권도영;김지훈;김원배;김학진;예병준
    • 한국주조공학회지
    • /
    • 제32권3호
    • /
    • pp.138-143
    • /
    • 2012
  • This steel has been synthesized integrating concepts from Austempering Ductile Cast Iron (ADI) technology. While ADI has excellent mechanical and physical properties, the Young's modules of ADI is approximately 20% lower than steel. In addition, the presence of graphite nodules in ADI can be sites of crack initiation, where fracture takes place at graphite matrix interface. Because of this limitations of ADI, there has been a growing interest in austempered steels as structural materials in resent years. In this investigation, a new steel with microstructure composed of ferrite and austenite and with simultaneous high tensile strength (1,150 MPa) and high ductility (33%) was developed. The goal of this investigation is to obtain a better understanding of deformation and transformation behaviour in high carbon retained austenite(${\gamma}_{HC}$) and over-saturated ferrite(${\alpha}$) during the plastic deformation. A detailed study of the microstructure of this steel was carried out by means of X-ray diffraction (XRD) and electron back scattering diffraction (EBSD) technic. In this way it was shown that BCC phase (BCC) took up the larger part of the nominal strain whereas the a part of retained austenite responded to the mechanincal load by partial martensite transformation, and misorientation change in the retained austenite after plastic strain could be attributed to the large elongation.

국방 MDM 수용요인에 관한 연구 (A Study on Acceptance Factors for MND-MDM)

  • 이인석;이춘열
    • 디지털융복합연구
    • /
    • 제9권6호
    • /
    • pp.355-368
    • /
    • 2011
  • 네트워크중심전(NCW: Network Centric Warfare) 환경 하에서 효과적인 전쟁수행을 위해서는 각종 시스템 간 데이터 공유가 필수적이며, 이를 위해서는 국방아키텍처(MND-EA) 고도화 및 국방 통합정보관리소 구축 등과 연계한 데이터 공동 활용을 위한 표준화와 통합관리 등이 필요하다. 본 연구의 목적은 현재 각 기관에서 주요 이슈로 등장하고 있는 데이터 공동 활용을 위한 마스터 데이터관리(Master Data Management: MDM)를 국방 분야에 도입하기 위해 기술수용모델을 활용하여 사용자의 이용의도에 영향을 미치는 요인들을 분석하고자 하였다. 또한 현재 총괄적인 기업 형태에 따라 보편적으로 적용되고 있는 가트너사(社)의 MDM 구현아키텍처를 대상으로 국방 업무환경과 특성을 고려한 선호아키텍처를 선정하고 이용의도에 미치는 영향을 분석함으로서 효과적인 국방 MDM(MND-MDM) 구축 방안을 제안하고자 한다. 자료조사는 국방정보화 시스템의 개발 및 유지보수와 자료를 관리하는 정 보화분야 담당자들과 국방정보시스템 개발 사업경험을 가진 주요 SI업체의 국방사업팀 담당자들을 대상으로 2011년 9월 19부터 10월 7일까지 3주간에 걸쳐 실시하였다.

1000MPa급 DP강 MIG 아크 브레이징 접합부의 기계적 성질에 미치는 브레이징 전류의 영향 (Effects of Brazing Current on Mechanical Properties of Gas Metal Arc Brazed Joint of 1000MPa Grade DP Steels)

  • 조욱제;윤태진;곽승윤;이재형;강정윤
    • Journal of Welding and Joining
    • /
    • 제35권2호
    • /
    • pp.23-29
    • /
    • 2017
  • Mechanical properties and hardness distributions in arc brazed joints of Dual phase steel using Cu-Al insert metal were investigated. The maximum tensile shear load was 10.4kN at the highest brazing current. It was about 54% compared to tensile load of base metal. This joint efficiency is higher than that of joint of DP steel using Cu-based filler metals which are Cu-Si, Cu-Sn. Fracture positions can be divided into two types. Crack initiation commonly occurred at three point junction among upper sheet, lower sheet and the fusion zone. However crack propagations were different with increasing the brazing current. In case of the lower current, it instantaneously propagated along with the interface between fusion zone and upper base material. On the other hand, in case of higher current, a crack propagation occurred through fusion zone. When the brazing current is low (60, 70A), the interface shape is flat type. However the interface shape is rough type, when the brazing current is high (80A). It is thought that the interface shapes were the reason why the crack propagations were different with brazing current. The interface was the intermetallic compounds which consisted of $(Fe,Al)_{0.85}Cu_{0.15}$ IMC formed by crystallization at $1200^{\circ}C$during cooling. Therefore the maximum tensile shear load and the fracture behavior were determined by a interface shape and effective sheet thickness of the fracture position.

네트워크 구조와 조직학습문화, 지식경영참여가 개인창의성 및 성과에 미치는 영향에 관한 실증분석: SI제안팀과 R&D팀의 비교연구 (Exploring Influence of Network Structure, Organizational Learning Culture, and Knowledge Management Participation on Individual Creativity and Performance: Comparison of SI Proposal Team and R&D Team)

  • 이건창;서영욱;채성욱;송석우
    • Asia pacific journal of information systems
    • /
    • 제20권4호
    • /
    • pp.101-123
    • /
    • 2010
  • Recently, firms are operating a number of teams to accomplish organizational performance. Especially, ad hoc teams like proposal preparation team are quite different from permanent teams like R&D team in the sense of how the team forms network structure and deals with organizational learning culture and knowledge management participation efforts. Moreover, depending on the team characteristics, individual creativity will differ from each other, which will lead to organizational performance eventually. Previous studies in the field of creativity are lacking in this issue. So main objectives of this study are organized as follows. First, the issue of how to improve individual creativity and organizational performance will be analyzed empirically. This issue will be performed depending on team characteristics such as ad hoc team and permanent team. Antecedents adopted for this research objective are cultural and knowledge factors such as organizational learning culture, and knowledge management participation. Second, the network structure such as degree centrality, and structural hole is used to analyze its influence on individual creativity and organizational performance. SI (System Integration) companies are facing severely tough requirements from clients to submit very creative proposals. Also, R&D teams are widely accepted as relatively creative teams because their responsibilities are focused on suggesting innovative techniques to make their companies remain competitive in the market. SI teams are usually ad hoc, while R&D teams are permanent on an average. By taking advantage of these characteristics of the two kinds of teams, we will prove the validity of the proposed research questions. To obtain the survey data, we accessed 7 SI teams (74 members), and 6 R&D teams (63 members), collecting 137 valid questionnaires. PLS technique was applied to analyze the survey data. Results are as follows. First, in case of SI teams, organizational learning culture affects individual creativity significantly. Meanwhile, knowledge management participation has a significant influence on Individual creativity for the permanent teams. Second, degree centrality Influences individual creativity significantly in case of SI teams. This is comparable with the fact that structural hole has a significant impact on individual creativity for the R&D teams. Practical implications can be summarized as follows: First, network structure of ad hoc team should be designed differently from one of permanent team. Ad hoc team is supposed to show a high creativity in a rather short period, implying that network density among team members should be improved, and those members with high degree centrality should be encouraged to show their Individual creativity and take a leading role by allowing them to get heavily engaged in knowledge sharing and diffusion. In contrast, permanent team should be designed to take advantage of structural hole instead of focusing on network density. Since structural hole can be utilized very effectively in the permanent team, strong arbitrators' merits in the permanent team will increase and therefore helps increase both network efficiency and effectiveness too. In this way, individual creativity in the permanent team is likely to lead to organizational creativity in a seamless way. Second, way of Increasing individual creativity should be sought from the perspective of organizational culture and knowledge management. Organization is supposed to provide a cultural atmosphere in which Innovative idea suggestions and active discussion among team members are encouraged. In this way, trust builds up among team members, facilitating the formation of organizational learning culture. Third, in the ad hoc team, organizational looming culture should be built such a way that individual creativity can grow up fast in a rather short period. Since time is tight, reasonable compensation policy, leader's Initiatives, and learning culture formation should be done In a short period so that mutual trust is built among members quickly, and necessary knowledge and information can be learnt rapidly. Fourth, in the permanent team, it should be kept in mind that the degree of participation in knowledge management determines level of Individual creativity. Therefore, the team ought to facilitate knowledge circulation process such as knowledge creation, storage, sharing, utilization, and learning among team members, which will lead to team performance. In this way, firms must control knowledge networks in permanent team and ad hoc team in a way mentioned above so that individual creativity as well as team performance can be maximized.

백화점(百貨店) 및 브랜드의 마케팅전략(戰略) 제안(提案)을 위한(爲限) 영캐주얼 브랜드의 위치(位置) 분석(分析) - L 백화점(百貨店)을 중심(中心)으로 - (A Study on the Position of Young Casual brands to Propose Marketing Strategies of the Brands and those of the Department Stores - focused on the L-Department Store -)

  • 유지헌
    • 패션비즈니스
    • /
    • 제8권4호
    • /
    • pp.117-130
    • /
    • 2004
  • The purposes of this study were to find out highly market sharing young casual brands, to compare their trends of concept and competition, and to propose orientation of brand concept repositioning and marketing strategies on Department stores. Reference searching method and field searching method were used for this study. The results were as follows: 1. The brands which covered more than 50% market share included <96NY> . 2. Price range of these brands was from 130,000 to 220,000 won. The brands of upper-moderate price zone included <96NY> and they were very competitive each other. The brands of moderate price zone included and they were also very competitive between them. However, the brands of lower-moderate price zone had lower competition. This price zone might be a good point to launch new brands. 3. The main target-age of young casual zone was from 17 to 30 years. The most of brands focused on 21-25 years old, which were higher age targeted before. 4. The main concepts of these brands were 'luxury, girlish, sexy' and 'Sportism, lifestyle' were sub-concepts.

기계 산업 분야의 통합 환경 조화와 안전을 위한 작업복 색채 배색 평가 (Color Arrangement Evaluation on Working Clothes for Safety and Integrated Environment Harmony in Machinery Industry Fields)

  • 박혜원;양정희
    • 패션비즈니스
    • /
    • 제16권5호
    • /
    • pp.207-219
    • /
    • 2012
  • It is intended to study the colors of work environment and the working clothes colors between humans and environment with application of the arrangement of working clothes colors to domestic machinery companies that play pivotal roles in the industry of Korea. The purpose of this study is to provide the foundation of color plan for the integrated environmental harmonization and the safety of industrial sites by analyzing the photographs of working clothes in the sires in consideration of the functions of colors (clearness, attention-getting, and safety) using the Faber Birren's Color Harmony and by analyzing the result of a questionnaire survey. The study was conducted by the method to shoot a worksite using a digital camera after wearing 24 sets of uniforms, which were developed by the color plan established in a previous study, in the same worksite. The shooting place was an outdoor steel sheet inspection site of D company, a machinery company in Changwon-si, Gyeongnam, and the intensity of illumination was 2400lux. 24 pieces of images were printed in 5x7 inch size and a questionnaire survey was performed at 5-point scale. The questionnaire survey was performed for 13 subjects consisting of 6 field professionals having more than 30 years of experiences, 4 clothes color professionals, and 3 industrial engineering professionals. The result of the survey was statistically analyzed by the method of frequency analysis using IBM SPSS Statistics 20 Program. As the result of assessment of basic four colors (yellow green, sky blue, blue, and violet) of working clothes, yellow green, sky blue, and blue showed high mean values in (Tint)+(Shade)+(Tone)+(Gray) equation indicating that its is a harmonized equation.

모바일 플랫폼에 따른 스마트 뱅킹의 지속사용에 영향을 미치는 선행요인: Android OS vs. iOS (Antecedent Factors Influencing the Continued Use of Smart Banking by Different Mobile Platforms: Android OS vs. iOS)

  • 김도형;하성호;박경배
    • 한국정보시스템학회지:정보시스템연구
    • /
    • 제24권2호
    • /
    • pp.209-240
    • /
    • 2015
  • 연구 목적 본 연구는 스마트 뱅킹(smart banking)의 다양한 속성과 사용자 속성, 지각된 즐거움, 신뢰 및 만족, 그리고 지속 사용 의도와의 관계를 구글의 안드로이드 운영체제(Android OS)와 애플의 운영체제(iOS)간 비교 분석하였다. 연구설계/방법론/접근법 본 연구의 목적을 달성하기 위해 2012년 9월 국내에서 실시된 설문조사를 바탕으로 총 245개의 샘플을 수집하였으며 이를 토대로 구조방정식을 통해 분석해 보았다. 결과 스마트 뱅킹 서비스에서 수렴성과 친숙성은 지각된 유용성에 유의미한 영향을 미치는 것으로 나타났으며, 보안성과 경제성은 지각된 신뢰성에 유의미한 영향을 미치는 것으로 밝혀졌다. 또한, 보안성, 경제성 및 혁신성의 지각된 유용성과의 관계, 그리고 편의성 및 친숙성의 지각된 신뢰성과의 관계에서 모두 안드로이드 운영체제가 iOS 보다 강한 영향력을 미침을 확인 할 수 있었다. 본 연구는 스마트 뱅킹에 관한 서로 다른 두 운영체제(Android OS vs. iOS)간의 비교분석을 수행함과 동시에 통합된 프레임워크를 제안함으로써 관련 연구에 이바지 할 것으로 기대된다.

MIS 정체성과 IS 핵심 역량 관점의 MIS 교육과정 방향 및 내용에 관한 연구 (A Study on the MIS curriculum directions and courses based on the MIS identity and IS core competency)

  • 장윤희
    • 디지털융복합연구
    • /
    • 제10권1호
    • /
    • pp.253-270
    • /
    • 2012
  • MIS 전공은 전 세계적으로 전공자 감소와 정체성에 대한 논의로 위기를 맞고 있다. 그러나 오늘날 기업에서의 IS 역할은 더욱 중요하며, 역량있는 IS 인력은 기업과 국가 경쟁력의 원천이다. 본 연구는 IS 인력을 양성하는 대학이 수요지향적인 IS 역량을 가진 인력을 배출할 수 있는 내용에 대하여 제안하고자 관련 선행연구, 북미 표준교육과정인 IS 2010, MSIS 2006, 국내 IT 인력 양성사업의 현황, 그리고 국내 SI 기업들의 인력양성 현황 등을 다양하게 살펴보았다. 향후 요구되는 IS 핵심역량에 기초한 미래지향적인 주요 교과목들은 ITA/EA, IT 거버넌스, IS 컨설팅, IS 전략과 정책, 시스템 분석 및 설계, DW/DM, BI, 최신 IT 기술, Packaged Solution 관련 과목, IT 감리/평가/보안 관련 과목, 프로젝트 관리, IT 서비스 관리 등이며, 비즈니스와 시스템에 대한 통합적 시각을 갖출 수 있는 캡스톤 과목의 신설이 요구된다. 또한 논리적, 분석적 사고, 문제 해결력, 커뮤니케이셔 등의 소프트 스킬을 개발할 수 있는 과목과 효과적인 교수법이 요구되며, 인턴십, 멘토링 프로그램 위한 산학협력의 중요성이 더욱 강조되었다.

지식경영 성공요인 및 장애요인 분석 (Survey for Success and Failure Factors in Knowledge Management)

  • 이동욱;이태식
    • 한국건설관리학회:학술대회논문집
    • /
    • 한국건설관리학회 2002년도 학술대회지
    • /
    • pp.261-264
    • /
    • 2002
  • 지적자본에 대한 중요성이 부각되는 시점에서 지식경영을 위한 지식관리시스템의 도입에 대한 관심이 고조되고 있다. 지식경영의 도입방법은 IT(Information Technology, 정보기술) 측면의 접근과 Non-IT 측면의 접근방법이 있다. IT 측면의 접근방법은 지식관리시스템(KMS)에 집중하는 것이며, Non-IT측면의 접근방법은 사람(people), 업무 프로세스(business process), 조직문화, 제도 등에 집중하는 것을 말한다. 지식경영 관련 부서 담당자 및 전문가와의 인터뷰에 따르면 효과적인 지식경영을 위해서는 IT 측면의 접근과 Non-IT측면의 접근이 동시에 추진되어야 하며, 성공적인 지식 경영을 위해서는 Non-IT 측면의 접근에 더 많은 비중을 두어야 한다고 답하였다. 본 연구에서는 지식경영 성공요인과 실패요인에 대해서 전문가(지식경영 컨설팅업체, 시스템 구축업체(SI업체), 지식경영 추진 부서 근무자)와 지식경영을 추진하고 있는 기업 임직원을 대상으로 설문 조사${\cdot}$분석을 실시하였다.

  • PDF