• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2052-2054
• /
• 2005

TFT-LCD requires to use poly silicon for High resolution and High integration. Thin film make of Poly silicon on the excimer laser-induced crystallization of PECVD(plasma-enhanced chemical vapor deposition)-grown amorphous silicon. In the thin film hydrogen affects to a device performance from bad elements like eruption, void and etc. So dehydrogenation prior to laser exposure was necessary. In this study, use RTP(Rapid Thermal Process) at various temperature from $670^{\circ}C$ to $750^{\circ}C$ and fabricate poly-silicon. it propose optimized RTP window to compare grain size to use poly silicon's SEM pictures and crystallization to analyze Raman curved lines.

• 한국전기전자재료학회논문지
• /
• 제24권3호
• /
• pp.208-214
• /
• 2011

In this thesis, the partial discharge according to applied voltage and variations of cross-sectional area and length of the conductor related to general condition for using cable was measured in order to study degradation diagnosis for 2-Core cable of the PVC insulator used in industrial fields for other safety installations. Also the thermal degradation conditions under various installation circumstances of cables were studied by assuming degradation conditions with each different degradation rate (50%, 67%, 100%) such as variation in degradated temperature, thermal exposure time, normal state, partially degradated state and overall degradated state for thermal degradation diagnosis. The quantity of electric discharge (V-Q) according to applied voltage was measured for measurement of inception voltage and extinction voltage. The quantity of electric discharge and the number of electric discharge (Q-N) were measured with applied voltage kept constantly. In addition, pictures were taken using SEM (scanning electron microscope) to compare the surface of external insulator to degradated state of internal insulator according to thermal degradation temperature and also compare the surface of external insulator to degradated surface state of internal insulator according exposure time of cables to thermal stress.

• 한국의류학회지
• /
• 제48권1호
• /
• pp.172-191
• /
• 2024

This study investigated how the visual and verbal presentation format of haptic information on apparel products in online stores affects consumers' imagery information processing. This includes the quantity and vividness of mental imagery, the ease of evoking mental imagery, and the evocation of imagination imagery. Additionally, the study explored consumer satisfaction with the information and online store. The study also tested a conceptual model to examine the effects of three imagery types on imagination imagery (as elaborated imagery) and how this imagination imagery affects consumer satisfaction. Employing a 2 × 3 × 2 between-subjects factorial design, twelve one-page websites were created for the experiment. 528 women in their 20s and 30s were randomly assigned to one of the 12 treatment conditions and answered the questionnaire. The results demonstrated significant differences in the three types of mental imagery, consumers' evocation of imagination imagery, and their satisfaction with information and online stores based on presentation format. The SEM analysis revealed that the quantity and vividness of mental imagery influenced the evocation of imagination imagery, affecting consumers' satisfaction with the information. These findings suggest that online retailers must provide close-up pictures or descriptive text of apparel products to elicit positive consumer responses.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
• /
• pp.61-66
• /
• 2006

Over the past 20 years there has been a revolution involving the use of nano or macro size particles as drainage and retention systems during the manufacture of paper. More recently a group of patented technologies called Synthetic Mineral Microparticles (SMM) has been invented and developed. This system has potential to further promote the drainage of water and retention of fine particles during papermaking. Prior research, as well as our on preliminary research showed that the SMM system has advantages in both of drainage and retention compared with montmorillonite (bentonite), which one of the most popular materials presently used in this kind of application. In spite of the demonstrated advantages of this SMM system, the properties and activity of SMM particles in the aqueous state have not been elucidated yet. Streaming current titrations with highly charged polyelectrolytes were used to measure the charge properties of SMM and to understand the interactions among SMM particles, fibers, fiber fines, and cationic polyacrylamide (cPAM) as a retention aid. It was found that pH profoundly affects the charge properties of SMM, due to the influence of Al-ions and the Si-containing particle surface. SEM pictures, characterizing the morphology, geometry and size distribution of SMM, showed an broad distribution of primary particle size. Dilution of SMM mixturee appeared to wash out particles smaller than 100 nm from the surface of larger particles, which themselves appeared to be composed of fused primary particles. DSC thermoporometry was used to measure the size distribution of nanopores within SMM particles.

• 한국의류산업학회지
• /
• 제10권2호
• /
• pp.249-253
• /
• 2008

The purpose of this study was to investigate the properties changes of wool fabrics dyed with safflower red and yellow colorants under Ultraviolet(UV)-light. For this purpose, the wool fabrics dyed with safflower red and yellow colorants were compared with each other after uv-light exposure in terms of K/S value, color changes(${\Delta}E$), morphology, and strength retention. K/S value rapidly decreased with increasing exposure time, but K/S value of the samples dyed with safflower yellow colorants decreased less than that of the samples dyed with safflower red colorants. In color changes, as increasing exposure time, $L^*$ and $b^*$ increased, $a^*$ decreased, and thereby ${\Delta}E$ increased in the samples dyed with safflower red colorants, $L^*$ increased, $a^*$ and $b^*$ decreased, and so ${\Delta}E$ increased in the samples dyed with safflower yellow colorants, indicating fading away by uv-light and changes of hue, value and chroma value. But the color change of samples dyed with safflower yellow colorants was less than that of samples dyed with safflower red colorants. SEM pictures showed a severe degradation by uv exposure, regardless of colorants type. Tensile strength slowly decreased until 14 days, and rapidly decreased until 21 days and slowly decreased. Strength retention of the samples dyed with safflower yellow colorants was higher than that of the samples dyed with safflower red colorants.

• Bulletin of the Korean Chemical Society
• /
• 제19권1호
• /
• pp.39-44
• /
• 1998

$LiCoO_2$ powder was synthesized in an aqueous solution by a sol-gel method and used as a cathode active material for a lithium ion rechargeable battery. The layered $LiCoO_2$ powders were prepared by igniting in air for 12 hrs at 600 ℃ $(600-LiCoO_2)$ and 850 ℃ $(850-LiCoO_2)$. The structure of the $LiCoO_2$ powder was assigned to the space group R bar 3 m (lattice parameters a=2.814 Å and c=14.04Å). The SEM pictures of $600-LiCoO_2$ revealed homogeneous and fine particles of about 1 μm in diameter. Cyclic voltammograms (CVs) of $600-LiCoO_2$ electrode displayed a set of redox peaks at 3.80/4.05 V due to the intercalation/deintercalation of the lithium ions into/out of the $LiCoO_2$ structure. CVs for the $850-LiCoO_2$ electrode had a major set of redox peaks at 3.88/4.13 V, and two small set of redox peaks at 4.18/4.42 V and 4.05/4.25 V due to phase transitions. The initial charge-discharge capacity was 156-132 mAh/g for the $600-LiCoO_2$ electrode and 158-131 mAh/g for the $850-LiCoO_2$ electrode at the current density of 0.2 mA/cm2. The cycleability of the cell consisting of the $600-LiCoO_2$ electrode was better than that of the $850-LiCoO_2$. The diffusion coefficient of the $Li^+$ ion in the $600-LiCoO_2$ electrode was calculated as $4.6{\times}10^{-8}\; cm^2/sec$.

• 대한치과보철학회지
• /
• 제36권3호
• /
• pp.468-482
• /
• 1998

Since the concept of osseointegration was introduced by Branemark of Sweden, dental implants have been used for various dental prosthetic treatments. The survival rate of dental implant is likely to be closely related to the total biomechanical role of each component of implant system. The use of interchangeable component is very attractive for dental practitioners because such an approach would save treatment cost, flexibility of prosthetic treatment options as well as conveniences. Therefore, the use of interchangeable implant system has been increasing without scientific assessment of safety and efficacy of various interchangeable implant system. The purpose of this study, therefore, were to compare the geometric characteristic of four interchangeable dental implant screws and the loosening torque of these screws. Four types of dental implant screws tested in this study were Nobelpharma, 3i, Impla-med, Restore. Four screws each of the test specimens were subjected for scanning electron microscopic examinations under the same condition and a 35x magnified standard SEM picture was objected from each test specimen using JSM-5200 scanning microscope. From each of the SEM pictures, eight parameters. i.e., diameter of screw head. screw length, thread pitch, major diameter. neck diameter, neck length, crest width and root width were determined using a caliper. The measurement for each parameters were then corrected for their magnification factor. The loosening torque were also determined by using a torque gauge. All of the measurements were statistically analyzed by ANOVA test and multiple range test. Statistical significance was set in advance at the probability level of less than 0.05. All analyses were done with SPSS software for the personal computer. The conclusion obtained from this studies were summarized as the following; 1. No statistically significances were noted in the thread pitch. and crest width in the four screws, and in the case of major diameter, the Impla-med screw was significantly smaller than the other three screws (p<0.05). Therefore, four implant bolts could be physically inserted in a abutment nuts. 2. The diameter of screw head was decreased in the order of Restore, 3i, Nobelpharma, Impla-med screws and the length of screws were decreased in the order of 3i, Restore, Nobelpharma and Impla-med. The diameter of neck was decreased in the order of Impla-med, Restore. Nobelpharma, 3i screws. The differences of each of these parameters were statistically significant (p<0.05). The width of root of screws were decreased in the order of Nobelpharma, Impla-med, Restore and 3i. The differences among Nobelpharma and Impla-med. Restore and 3i were statistically significant (p<0.05). 3. When the screws were loosening 1, 3, 4 and 5 times, the loosening torque for Impla-med and 3i screws were significantly higher than that of Nobelpharma or Restore screws (p<0.05). However, when statistically smaller than that of 3i, Restore or Nobelpharma screws(p<0.05).

• 공업화학
• /
• 제28권1호
• /
• pp.73-79
• /
• 2017

이축압출기(twin screw extruder)를 이용하여 $190^{\circ}C$에서 말레인산 무수물(maleic anhydride, MAH)과 스티렌 모노머(styrene monomer, SM)의 함량을 변화시켜가며 MAH와 SM이 그래프트된 폴리프로필렌(PP-g-MAH-SM) 공중합체를 제조하였다. 제조한 PP-g-MAH-SM 공중합체의 그래프트율은 비수용성 역적정을 통하여 측정하였으며, 동일한 MAH 함량에서 SM이 사용된 경우 높은 그래프트율을 나타내었다. 그래프트율에 따른 PP-g-MAH-SM/케나프섬유(kenaf fiber, KF) 복합체를 $200^{\circ}C$에서 제조하였고, KF의 함량은 20 wt%로 고정시켰다. 복합체에 대한 열중량분석기(TGA)의 분해온도에 따르면, MAH 만 적용된 PP-g-MAH 보다 MAH와 SM이 함께 적용된 PP-g-MAH-SM 복합체의 열안정성이 다소 우세하였다. 복합체의 기계적 강도 또한 MAH와 SM이 함께 적용된 경우에 개선정도가 우수하였다. 계면접착정도는 파단면의 SEM과 접촉각으로 확인하였다.

• 폴리머
• /
• 제38권5호
• /
• pp.566-572
• /
• 2014

이축압출기(twin screw extruder)를 이용하여 폴리프로필렌(polypropylene, PP)의 종류에 따라 말레인산 무수물(maleic anhydride, MAH) 함량과 스티렌(SM)/MAH 몰비를 변화시키며 MAH가 그래프트된 PP(MAH-g-PP)를 제조하였다. PP의 종류로는 이소탁틱(isotactic, iPP), 블록(block, bPP), 랜덤(random, rPP)에 대해 용융지수(melt index, MI)가 10 그리고 25 g/10 min이 사용되었고, 개시제로는 dicumyl peroxide(DCP)가 사용되었다. MAH의 그래프트 정도는 FTIR을 이용하여 $1700cm^{-1}$ 근처에서 나타나는 카르보닐기(C=O) 신축진동 피이크의 존재 여부를 통해 확인하였다. 또한 PP/MAH-g-PP/pulp 복합체의 열적특성을 시차주사열용량분석기(DSC)와 열중량분석기(TGA)를 이용하여 관찰하였다. 복합체의 열적특성에는 큰 차이를 나타내지 않았다. 복합체의 인장특성과 인장시험 후 파단면의 SEM을 측정한 결과, MAH-g-rPP를 상용화제로 적용한 경우 인장특성 개선효과가 가장 우수하였다. MAH 함량 1.0 wt%, SM/MAH 몰비 1.0, MI = 25 g/10 m인 경우가 최적으로 평가되었다. 복합체의 유변학적 특성은 동적유변측정기를 이용하여 측정하였고, 복소 점도와 전단박하 그리고 함수량의 경우 펄프의 함량에 따라 증가하였다.

• 공업화학
• /
• 제25권3호
• /
• pp.318-323
• /
• 2014

랜덤 폴리프로필렌(random polypropylene, rPP)의 무수말레인산(maleic anhydride, MAH) 반응압출에 대한 MAH 함량 및 스티렌/MAH 몰비의 영향을 고찰하기 위해 이축압출기(twin screw extruder)를 이용하여 MAH가 그라프트된 rPP(MAH-g-rPP)를 제조하였다. MAH의 함량은 0.5, 1.0, 3.0, 5.0 phr이었고, 스티렌/MAH 몰비는 0, 1, 2로 하였으며, 개시제로는 dicumyl peroxide (DCP)가 사용되었다. MAH의 그라프트 정도는 FT-IR을 이용하여 $1700cm^{-1}$ 근처에서 나타나는 카르보닐기(C = O) 신축진동 피크의 존재 여부를 통해 확인하였으며, $3000cm^{-1}$ 근처의 C-H 신축진동을 기준으로 하여 정량한 결과 그라프트 반응이 MAH 함량이 3.0 phr까지 증가하는 경향을 보여주었고, 스티렌 몰비는 1.0일 때 최적을 나타내었다. MAH-g-rPP와 MAH-g-rPP가 5.0 phr 포함된 PP/MAH-g-rPP/pulp 복합체의 열적특성, 결정화 특성 등을 시차주사열용량분석기(DSC), 열중량분석기(TGA), X-선 회절분석(XRD), 편광현미경(POM) 등을 이용하여 관찰하였다. 비등온 결정화온도는 rPP-g-MAH가 첨가되었을 때 감소하는 경향을 나타내었고, PP/MAH-g-rPP/pulp 복합체의 인장특성과 인장시험 후 파단면의 SEM을 측정한 결과, MAH 함량 1.0 wt%, 스티렌/MAH 몰비 1.0일 때 상용화제로의 역할이 가장 우수한 것으로 나타났다. 복합체의 가공성 비교를 위해 복소 점도와 전단박하(shear thinning) 정도를 동적유변측정기를 이용하여 측정하였다. 상용화제를 가지는 복합체의 경우 낮은 멱수 법칙 지수(n)를 보여주었다.