• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.231-231
• /
• 2011

본 연구에서는 co-sputtering 시스템을 이용하여 아나타세 TiO2의 도핑 농도 변화에 따른 다성분계 TiO2-ITO (TITO) 박막의 전기적, 광학적, 구조적 특성 변화 및 급속 열처리(RTA) 공정에 따른 전기적, 광학적 특성 변화를 분석하였다. 실험을 위해 아나타세 TiO2 타겟과 ITO 타겟(10 wt% $SnO_2$ doped $In_2O_3$)이 tilted cathode에 장착되었으며, ITO 타겟의 인가전류를 120 W로 고정한 채 아나타세 TiO2 타겟의 인가전류를 증가시킴으로써 도핑 농도를 변화하였다. 제작된 TITO 투명 전극의 전기적, 광학적, 구조적 특성 평가를 위해 four-point probe measurement, Hall effect measurement, UV/Vis. spectrometry, scanning electron microscopy (SEM) 이용하여 각각의 특성을 분석하였다. 상온에서 제작된 TITO의 경우 최적화된 $TiO_2$ 인가전류 100W에서 460.8 ohm/sq. 의 전기적 특성과 가시광선 영역 400~550 nm에서 85% 이상의 광학적 투과율을 확보할 수 있었다. 뿐만 아니라 상온에서 최적화된 TITO 투명 전극의 급속 열처리 시 600$^{\circ}C$ 급속 열처리 조건에서 매우 낮은 25.94 ohm/sq.면저항, $5.1{\times}10^{-4}$ ohm-cm 비저항과 81% 투과율을 확보할 수 있었다. 아나타세 $TiO_2$가 도핑된 TITO 투명 전극의 급속 열처리 공정에도 불구하고 매우 평탄한 표면을 나타냄을 SEM 이미지를 통하여 확인할 수 있었다. 이러한 TITO 투명 전극의 우수한 전기적, 광학적, 구조적 특성은 indium saving 투명 전극으로써 고가 ITO 박막의 대치가능성을 나타낸다.

• Applied Chemistry for Engineering
• /
• v.23 no.3
• /
• pp.308-312
• /
• 2012

Nitrogen doped $TiO_2$ photocatalysts were prepared by ammonia for exploring the visible light photocatalytic activity. To explore the visible light photocatalytic activity of the nitrogen doped $TiO_2$ photocatalyst, the removal of methylene blue dye was investigated under the sunlight. SEM images showed that the flocculated particle sizes of N-doped $TiO_2$ decreased due to the reaction with ammonia. XRD patterns demonstrated that the samples calcined at temperatures up to $600^{\circ}C$ and doped with nitrogen using ammonia clearly showed rutile as well as anatase peaks. The XPS results showed that the nitrogen composition onto $TiO_2$ increased according to the reaction time with ammonia. Photocatalytic activity of the nitrogen doped $TiO_2$ was better than that of undoped $TiO_2$. Nitrogen doping onto the $TiO_2$ also affected the crystal type of $TiO_2$ photocatalyst.

• Transactions of the Korean hydrogen and new energy society
• /
• v.28 no.5
• /
• pp.521-530
• /
• 2017

Improving the microstructure of NiO/YSZ is one of several approaches used to enhance the electrical and mechanical properties of an anode support in Solid Oxide Fuel Cells (SOFCs). The aim of the work reported in this paper was to predict the relationship between these microstructural changes and the resulting properties. To this end, modification of the anode microstructure was carried out using different sizes of Poly (Methyl Methacrylate) (PMMA) beads as a pore former. The electrical conductivity and mechanical strength of these samples were measured using four-probe DC, and three-point bend-test methods, respectively. Thermal etching followed by high resolution SEM imaging was performed for sintered samples to distinguish between the three phases (NiO, YSZ, and pores). Recently developed image analysis techniques were modified and used to calculate the porosity and the contiguity of different phases of the anode support. Image analysis results were verified by comparison with the porosity values determined from mercury porosimetry measurements. Contiguity of the three phases was then compared with data from electrical and mechanical measurements. A linear relationship was obtained between the contiguity data determined from image analysis, and the electrical and mechanical properties found experimentally. Based upon these relationships we can predict the electrical and mechanical properties of SOFC support from the SEM images.

• Journal of Korean Ophthalmic Optics Society
• /
• v.11 no.2
• /
• pp.85-89
• /
• 2006

To research of the improved mechanical properties of materials for spectacle lens cutting, SiC and TiC were used as the main powder. Also, $Al_2O_3$ and $Y_2O_3$ was included as a sintering additive. The weight ratio of the alumina($Al_2O_3$) to yttria($Y_2O_3$) was set to 1:1. The materials for spectacle lens cutting were fabricated by hot-pressing at $1810^{\circ}C$ for 1h and subsequently annealed at $1860^{\circ}C$ for 3, 6 and 12h to initiated grain growth. The longer annealing time is, the bigger the grain size is. The microstructures were observed by scanning electron microscopy (SEM). The SEM images were quantitatively analyzed by image analysis (Image-Pro Plus, Media Cybernetics, Maryland, U.S.A.). Crack deflection by elongated SiC grains was most frequently observed as the dominant toughening mechanism. Crack deflection was generally observed for elongated SiC grains with aspect ratio(AR) > 2.5 and grain thickness < $2.3{\mu}m$. Crack bridging was also observed as one of the operating toughness mechanism.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.2
• /
• pp.33-38
• /
• 2020

In the photoelectrochemical (PEC) water splitting, GaN is one of the most promising photoanode materials due to high stability in electrolytes and adjustable energy band position. However, the application of GaN is limited because of low efficiency. To improve solar to hydrogen conversion efficiency, we introduce a Cobalt Phosphate (Co-pi) catalyst by photo-electrodeposition. The Co-pi deposition GaN were characterized by SEM, EDS, and XPS, respectively, which illustrated that Co-pi was successfully decorated on the surface of GaN. PEC measurement showed that photocurrent density of GaN was 0.5 mA/㎠ and that of Co-pi deposited GaN was 0.75 mA/㎠. Impedance and Mott-Schottky measurements were performed, and as a result of the measurement, polarization resistance (R_p) and increased donor concentration (N_D) values decreased from 50.35 Ω to 34.16 Ω were confirmed. As a result of analyzing the surface components before and after the water decomposition, it was confirmed that the Co-pi catalyst is stable because Co-pi remains even after the water decomposition. Through this, it was confirmed that Co-pi is effective as a catalyst for improving GaN efficiency, and when applied as a catalyst to other photoelectrodes, it is considered that the efficiency of the PEC system can be improved.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.42 no.1
• /
• pp.1-7
• /
• 2016

Highly porous polymethyl methacrylate (PMMA) microspheres impregnated by $TiO_2$ powder were prepared by spray drying method. The particle size and the porosity were controlled by optimizing the co-solvent ratio and the polymer concentration. $TiO_2$ powder was impregnated into the microspheres upto 74.6 wt% content based on the weight of the resultant $PMMA/TiO_2$ microspheres. SEM images showed that $TiO_2$ powder was well distributed throughout the inside of the microsphere. EDX mapping showed that the Ti signal was well detected from every part of the microspheres, which was the evidence of the formation of the $PMMA/TiO_2$ composite. Hg porosimetry result showed that the porosity was found to be over 50% regardless of the $TiO_2$ contents. The final product was found to have high oil-absorbing capacity and great hiding power, both of which are key properties in designing the microsphere materials for make-up cosmetics application.

• Journal of Distribution Research
• /
• v.17 no.5
• /
• pp.85-111
• /
• 2012

Introduction : The purpose of this study was to examine the relationship between perceptual characteristics of consumers and intent of relational continuance for PB(Private Brand) products in discount stores. This study was conducted as an empirical study based on survey. For the empirical study, factors of PB products as characteristics perceived by consumers such as perceived quality, store image, brand image and perceived value were deduced from preceding studies. The effect of such factors on intent of relational continuance mediated by brand trust and brand equity of PB products was structurally examined. Research Model : Based on theory analysis and hypotheses, constructed a Structural Equation Model(SEM). The research model is shown in Figure 1. Research Method : This paper is based on s qualitative study of selected literature and empirical data. The survey for empirical study was carried out on consumers in Gyeonggi and Busan between January 2012 and May 2012. 300 surveys were distributed and 253 (84.3%) of them were returned. After excluding omissions and insincere responses, 245 surveys (81.6%) were used for final analysis as effective samples. Result : First of all, the Reliability was carried out for instrument used. The lower limit of 0.7 for Cronbach's Alpha as suggested by Hair et al. (1998). And Construct validity was established by carrying out exploratory factor analysis by Varimax rotation for all. Four factor result for the consumer's perceptual characteristics of PB Products, two mediating factors and one dependent factor. All constructs included in research framework have acceptable validity and reliability. Table 1 shows the factor loading, eigen value, explained variance and Cronbach's alpha for each factor. In order to assure validity of constructs, I implemented Confirmatory Factor Analysis (CFA), using AMOS 20.0. In confirmatory factor analysis, researcher can take control over the specification of indicators for each factor by hypothesizing that a specific factor is loaded with the relevant indicators. Moreover, CFA is particularly useful in the validation of scale for the measurement of specific construct. CFA result summarized Table 2 shows that the fit measures of all constructs fulfill the recommended level and loadings are significant. To test causal relationship between constructs in the research model, used AMOS 20.0 that provides a graphic module as method for analysing Structural Equation Modeling. The result of hypothesis test is shown in Table 3. As a result of empirical study, perceived quality, brand image and perceived value as selected attributes for PB products showed significantly positive (+) effect on brand trust and brand equity. Furthermore, brand trust and brand equity showed significantly positive (+) effect on intent of relational continuance. However, store image of discount stores selling the PB products was analyzed to have positive (+) effect on brand trust and no significant effect on brand equity. Discussion : Based on the results of this study, the relationship between overall quality, store image, brand image and value perceived by consumers about PB products and intent of relational continuance was structurally verified as being mediated by brand trust and brand equity. Looking at the results, a strategic approach that maximizes brand trust and equity value for PB products by large discount stores is required on top of basic efforts to improve quality, brand image and value of PB products in order to maximize consumer's intent of relational continuance and to continuously attract repeated purchase of products.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.154-154
• /
• 2016

다공성 수지상 구리분말은 그 구조적 특성으로 인해 다양한 촉매 분야에 사용되어왔으며, 본 연구에서는 전해도 금욕의 종류에 따라 수지상 구리의 표면적 특성에 대해 연구하였다. 도금욕의 종류($CuSO_4$, $CuCl_2$, $Cu_2P_2O_7$), 인가 전위, 도금시간(1, 5, 10, 30min)에 따른 수지상 형상을 비교하였다. SEM 이미지 분석 결과 황산구리와 염화구리 도금용액에서는 plate-like dendrite 형상이 관찰되었으며, 피로인산구리 도금용액에서는 needle-like dendrite 형상이 관찰되었다. 정전위 실험결과 도금용액별 한계전류밀도에서 음(-)의 방향으로 100mV 낮은 지점의 인가 전위 및 도금시간 10분에서 3가지 용액 모두 가장 미세한 수지상 입자가 관찰되었다. 도금용액별 겉보기 밀도 및 BET 비표면적을 측정해본 결과 미세한 수지상일수록 겉보기밀도는 낮게 비표면적은 크게 측정되었다. 가장 낮은 겉보기 밀도와 가장 높은 BET 비표면적을 가지는 용액은 염화구리 도금용액이었으며 그 값은 $0.951g/cm^3$, $1.8052m^2/g$이었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.176-176
• /
• 2010

전자기술이 발전함에 따라 전자부품 소자는 소형화, 다기능화, 고집적화, 대용량화 되고 있다. 그에 따른 부품들의 고밀도화는 높은 열을 발생시켜 각종 전자부품을 기판으로부터 단락 시키거나 기능을 상실하게 하는 문제점이 발생된다. 이와 같은 문제점을 해결하기 위해서는 발생된 열을 가능한 빠르게 방열 시켜주는 것이 대단히 중요하고 높은 방열 특성을 가지는 금속 PCB기판의 중요성이 높아지고 있다. 하지만 금속을 PCB에 적용하기 위해서는 금속기판과 회로전극사이에 절연층이 반드시 필요하다. 본 실험에서는 RF-Magnetron Sputtering 방법을 이용하여 AlN(질화알루미늄)을 절연물질로 사용, Aluminum기판위에 후막을 제작하여 열적 전기적 구조적 특성을 분석 하였다. 스퍼터링시 아르곤과 질소 분압비에 따른 특성과 후막의 두께에 따른 열적, 전기적, 구조적 특성을 측정 분석하였고, 후열처리를 통하여 AlN 후막의 특성 측정 결과 $200^{\circ}C$로 후열처리 했을 경우 절연파괴전압이 후열처리 전 0.56kV보다 1.125kV로 높아지고 SEM 이미지 상의 AlN 입자 밀도가 더욱 조밀해지는 것으로 확인 하였다. 결론적으로 AlN를 RF-Magnetron Sputtering 방법으로 증착 금속 PCB의 절연물질로 적용하기 위해서는 적정한 가스분압비와 후열처리가 필요하며 이를 통하여 금속 PCB의 절연층으로 응용 가능성이 높을 것으로 사료된다. 본 연구는 한국 산업기술 진흥원의 사업화 연계 연구개발(R&BD)사업의 연구비 지원에 의한 것입니다.

• Analytical Science and Technology
• /
• v.21 no.2
• /
• pp.148-157
• /
• 2008

To describe the lifetime prediction of gas turbine core parts serviced in some ten thousands rpms at over $1,000^{\circ}C$, the Larson-Miller Creep Curves, which are formed by creep rupture tests as the destructive experiment with parameters of stress and temperature, are used often, but not exact and reliable with errors of over some tens. On the other hand, this study shows a non-destructive method with increased accuracy and reliability. The SEM and TEM specimens were extracted by replica after polishing the local airfoil and root surfaces of the first stage scraped blade (bucket), serviced for 18,000 hours at $1,280^{\circ}C$ in Gas Turbines of Boryong. The observed TEM and SEM precipitates were digitalized for calculation of the average size. Here we could find the precipitate size grown from $0.45{\mu}m$ to $0.6{\mu}m$ during service and the grown precipitates to be still sound. From these results we could conclude that the scraped balde can be used for ten thous and hours additionally and for twenty thousand hours by additional heat treatments on the scraped blade.