• 한국항해항만학회지
• /
• 제37권5호
• /
• pp.511-517
• /
• 2013

UNFCCC was adopted in 1992 in order to prevent global warming. However, as a lack of concrete reduction goal and implementation plan, UNFCCC could not have effectiveness. In 1997, Kyoto Protocol to UNFCCC was adopted and UNFCCC regime started practically binding on the parties. Global warming takes the leading role in changing marine environment such as the rising of water level and sea water temperature. Also, Ocean plays the vital role in storing carbon to prevent global warming. Meanwhile ships which get the propulsion generated by consuming the fossil fuel are identified as GHG source and the discussions regarding the control of GHG emitted from ships are still in progress in IMO. IMO instrument has some legal conflicts with UNFCCC in principle. Therefore, this paper reviews the present UNFCCC regime and UNCLOS. Also, it surveys activities of IMO and analyze the Amendment to MARPOL73/78 Annex VI which entered into force on January 1, 2013. Finally, conclusions suggest the improvements in order to ensure effectiveness the new Amendment to MARPOL73/78 practically.

• 대한조선학회논문집
• /
• 제52권2호
• /
• pp.110-118
• /
• 2015

Weather routing method is one of the best practices of SEEMP (Ship Energy Efficiency Management Plan) for fuel-efficient operation of ship. KR is carrying out a basic research for development of the weather routing algorithm and making a monitoring system by FOC (Fuel Oil Consumption) analysis compared to the reference, which is the great circle route. The added resistances applied global sea/weather data can be calculated using ship data, and the results can be corrected to ship motions. The global sea/weather data such as significant wave height, ocean current and wind data can be used to calculate the added resistances. The reference route in a usual navigation is the great circle route, which is the shortest distance route. The global sea/weather data can be divided into grids, and the nearest grid data from a ship's position can be used to apply a ocean going vessel's sea conditions. Powell method is used as an optimized routing technique to minimize FOC considered sea/weather conditions, and FOC result can be compared with the great circle route result.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2013년도 춘계학술대회
• /
• pp.198-200
• /
• 2013

최근 국제해사기구(IMO)의 해양환경보호위원회에서(MEPC)는 선박에서 대기로 방출되는 CO2의 양을 최소로 하기 위해서 신조선 설계 건조시 에너지효율지수(EEDI : Energy Efficiency Design Index for new ships), 에너지 효율지표(EEOI : Energy Efficiency Operational Indicator), 그리고 에너지 효율관리 계획(SEEMP : Ship Energy Efficiency Management Plan) 지수들을 이용하여 전 세계 이산화탄소 배출 규제 방침을 운영하고 있다. 이러한 환경규제 강화와 발맞추어 세계 각국은 지속적인 Green-ship의 개발과 저탄소 고효율 선박의 운항을 위해 연구와 노력한다. 본 연구에서는 선박이 움직이는데 있어 동력이 시작되는 부분과 그 힘이 전달되어 운항자의 의식이 반영되어 선체의 이동으로 이어지기까지 흐름에 대해 도식 및 수식으로 정리하였다. 그리하여 해상의 상태와 이에 따른 운항결정이 어떤 결과를 초래할 수 있는지 살펴보고 이 부분에서 운항효율을 증대시킬 수 있는 부분에 대해 모색해 보았다. 또한 엔진의 상태에 따른 연료 절감율에 대해 살펴보고 보다 경제적 운항을 위한 적정 RPM과 속도 등에 대해서 고찰해 보았다. 이 같은 정리를 통해 앞으로의 Echo-ship, Green-ship의 연구방향에 대한 초석으로 삼고자 한다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2013년도 춘계학술대회
• /
• pp.97-100
• /
• 2013

전 세계 국제무역거래의 80%가 해상운송으로 이루어지고 있음에 따라, 연 6%로 세계 컨테이너 물동량의 증가가 전망됨에 따라 선박기인 온실가스의 증가에 대한 관심과 규제가 강화되고 있다. 즉 IMO 제62차 해양환경보호위원회에서 선박기인 온실가스 규제방안으로 EEDI와 SEEMP를 도입, 현재 발효 중에 있으며, 각 국의 항만당국 또한 대기오염 등의 환경규제 정책의 일환으로 그린 또는 에코포트 정책을 수립하여 이행 중에 있다. 이러한 해운환경의 변화로 인하여 해운선사는 글로벌 경쟁력 강화와 환경규제에 대응하기 위하여, 선박의 대형화를 통한 규모의 경제 실현은 물론, 급등하는 유가와 환경규제에 대비하여 고 에너지효율 및 저탄소 선박에 대한 수요가 늘어나고 있다. 이에 일본, 싱가폴, 노르웨이 등 EU 국가 등의 해운 선진국들은 1990년대 후반부터 친환경 선박의 개발에 대한 국가적 프로젝트를 체계적으로 이행해 오고 있으며, 이를 통한 친환경 선박기술의 확보와 친환경 선박시장의 점유율을 높이고 있는 추세이다. 따라서 본 논문은 선진 해운국가들이 수행중인 친환경 선박개발의 현황에 대한 벤치마킹을 통하여 상대적으로 뒤쳐져 있는 우리나라 친환경 선박개발 방안을 위한 여러 정책적 제안을 하고자 한다.

• 대한조선학회논문집
• /
• 제55권6호
• /
• pp.457-465
• /
• 2018

Since IMO has discussed the effectuation of the EEDI, EEOI and SEEMP, each country, shipping company, shipbuilding company and research institute have been requested to prepare the design, construction and operation of the efficient ship. From the shipbuilding company's point of view, it was necessary to develop a method based on the maneuvering equations of motion in a bid to estimate the EEOI considering the design, model test results and the calculation results of the ship. In this paper, the estimation method of RPM, power and fuel consumption proposed in the previous research was developed to construct a framework that helps in the estimation of the EEOI. It was possible to estimate the EEOI from the estimated ship speed (distance), LNG cargo mass, fuel consumptions and emission factors according to the type of fuel. The rapid increase of the evaluated EEOI was observed when the LNGC with ME-GI engine executing the course changed with a large difference. This prompted the comparison of the type of fuel on the estimated EEOI by considering HFO, LNG fuel and MGO properties.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권2호
• /
• pp.123-132
• /
• 2014

The maritime sector is advancing with dedicated endeavor to reduce greenhouse gas in addressing issues with regards to global warming. Since 01 January 2013, the International Maritime Organization (IMO) regulation mandatory requirement for Energy Efficiency Design Index (EEDI) has been in place and should be satisfied by newly-built ships of more than 400 gross tonnage and the Ship Energy Efficiency Management Plan (SEEMP) for all ships type. Therefore, compliance to this necessitates planning during the design stage whereas verification can be carried-out through an acceptable method during sea trial. The MEPC-approved 2013 guidance, ISO 15016 and ISO 19019 on EEDI serves the purpose for calculation and verification of attained EEDI value. Individual ships EEDI value should be lower than the required value set by these regulations. The key factors for EEDI verification are power and speed assessment and their synchronization. The shaft power can be measured by telemeter system using strain gage during sea trial. However, calibration of shaft power onboard condition is complicated. Hence, it relies only on proficient technology that operates within the permitted ISO allowance. On the other hand, the ship speed can be measured and calibrated by differential ground positioning system (DGPS). An actual test on a newly-built vessel was carried out to assess the correlation of power and speed. The Energy-efficiency Design Index or Operational Indicator Monitoring System (EDiMS) software developed by the Dynamics Laboratory-Mokpo Maritime University (DL-MMU) and Green Marine Equipment RIS Center (GMERC) of Mokpo Maritime University was utilized for this investigation. In addition, the software can continuously monitor air emission and is a useful tool for inventory and ship energy management plan. This paper introduces the synchronization and identification method between shaft power and ship speed for EEDI verification in accordance with the ISO guidance.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권10호
• /
• pp.1054-1061
• /
• 2015

The International Maritime Organization (IMO) has been regulating emissions by making mandatory the compliance with institutions aimed at protecting air quality such as the Energy Efficiency Design Index (EEDI), Ship Energy Efficiency Management Plan (SEEMP) and Tier III. Under the circumstances, one of the response measures considered to be the most feasible is the replacement of existing marine fuel with Liquefied Natural Gas (LNG). The industry has been preemptively building infrastructure and developing and spreading engine technology to enable the use of LNG-fueled ships. The IMO, in turn, recently adopted the International Code of Safety for Ships Using Gases or Other Low-Flash-Point Fuels (IGF Code) as an institutional measure. Thus, it is required to comply with regulations on safety-related design and systems focused on response against potential risk for LNG-fueled ships, in which low-flash-point fuel is handled in the engine room. Especially, the Standards of Training, Certification and Watchkeeping (STCW) Convention was amended accordingly. It has adopted the qualification and training requirements for seafarers who are to provide service aboard ships subject to the IGF Code exemplified by LNG-fueled ships. The expansion in the use of LNG-fueled ships and relevant facilities in fact is expected to increase demand for talents. Thus, the time is ripe to develop methods to set up appropriate STCW training courses for seafarers who board ships subject to the IGF Code. In this study, the STCW Convention and existing STCW training courses applied to seafarers offering service aboard ships subject to the IGF Code are reviewed. The results were reflected to propose ways to design new STCW training courses needed for ships subject to the IGF Code and to identify and improve insufficiencies of the STCW Convention in relation to the IGF Code.

• 한국해양공학회지
• /
• 제29권6호
• /
• pp.418-426
• /
• 2015

Recently, shipping operators have been making efforts to reduce the fuel cost in various ways, such as trim optimization and bulb re-design. Furthermore, IMO restricts the hydro-dioxide emissions to the environment based on the EEDI (Energy Efficiency Design Index), EEOI (Energy Efficiency Operational Indicator), and SEEMP (Ship Energy Efficiency Management Plan). In particular, ship speed is one of the most important factors for calculating the EEDI, which is based on methods suggested by ITTC (International Towing Tank Conference) or ISO (International Standardization Organization). Many shipbuilding companies in Korea have carried out speed trials around the Korea Straits. However, the conditions for these speed trials have not been exactly the same as those for model tests. Therefore, a ship’s speed is corrected by measured environmental data such as the seawater temperature, density, wind, waves, swell, drift, and rudder angle to match the conditions of the model tests. In this study, fundamental research was performed to evaluate the ship resistance performance due to changes in the water temperature and salinity, comparing the ISO method and numerical simulation. A numerical simulation of a KCS (KRISO Container ship) with a free-surface was performed using the commercial software Star-CCM+ under three conditions that were assumed based on the water temperature and salinity data in the Korea Straits. In the simulation results, the resistance increased under low water temperature & high salinity conditions, and it decreased under high water temperature & low salinity conditions. In addition, the ISO method showed the same result as the simulation.

• Journal of Advanced Marine Engineering and Technology
• /
• 제41권1호
• /
• pp.15-20
• /
• 2017

국제해사기구(IMO)는 온난화의 원인인 온실가스 감축을 위한 강제 규제를 도입하여 시행을 하고 있다. 하지만 여전히 지구의 온난화는 진행 중에 있고, IMO는 빠른 시일 내에 SEEMP와 EEOI에 기반한 자발적인 이산화탄소 감축 방법을 강제화 하려는 움직임이 있다. 연료 및 이산화탄소 절감을 위해 대형 컨테이너 선박은 낮은 속도에서 운항을 결정하였다. 하지만 높은 선속으로 설계되어진 선수 구조는 오히려 선속 저하 때는 저항으로 작용하여 연료 절감 효과를 저해하는 현상을 발견하였다. 대형 컨테이너 선박의 저속화를 위해 선수 구상부를 개조하여 더욱더 높은 연료 절감을 시행하였다. 고속 대형선의 저속 운항에 적합한 선수 개조가 얼마나 효율적으로 운항선 에너지효율지수를 변하게 하는지를 개조 전후의 연료 소비량을 비교 검토하였다. 그 결과 예상했던 것보다 많은 이산화탄소 감축량을 확인하였다. 운항선 이산화탄소 감축 강제 규제가 시행된다면 고속선들의 연료 절감 방법의 하나로 효과적인 적용 방법으로 고려되어진다. 또한 연료절감형 운항 선박에 투자하여 에너지 효율적인 선박으로 운항하기 위한 것이다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권7호
• /
• pp.722-728
• /
• 2015

2013년 1월 1일 이후 발효된 선박 에너지효율관리계획(SEEMP) 규정에 따라 선박에서는 점차 에너지관리에 대한 요구가 증가되고 있다. 이에 따라, 선박의 에너지 사용에 가장 많은 부분을 차지하는 주기관의 연료 사용량 및 출력과 관련된 요소들이 엄격하게 모니터링 되어 질 필요가 있다. 현재 주기관 출력을 모니터링 및 확인하기 위한 많은 장치들이 개발되어 적용되고 있으나 본 연구에서는 저렴하고 장치가 쉬운 각도센서인 엔코더(encoder)를 이용하여 주기관의 출력상태를 실시간으로 파악하기 위한 실험을 하였다. 실제 운항 중인 두 선박의 주기관에서 엔코더와 근접센서를 이용하여 한 사이클 동안의 각속도 변동을 계측하고 이 데이터 값을 토크 변동으로 계산하여 주기관의 토크변동 상태를 조사하였다. 또한, 실린더의 이상 연소 시 발생하는 각속도 변화를 측정하여 착화 실패에 따른 토크 변동을 조사하고 실험의 신뢰성을 확보하기 위해 해상시운전 데이터와 비교하였다. 본 연구를 통해 저렴한 장치를 이용하여 실시간 출력상태를 파악할 수 있었다.