• Proceedings of the Korea Water Resources Association Conference
• /
• 2002.05a
• /
• pp.27-40
• /
• 2002

Developed at Colorado State University, CASC2D-SED is a physically-based model simulating the hydrologic response of a watershed to a distributed rainfall field. The time-dependent processes include: precipitation, interception, infiltration, surface runoff and channel routing, upland erosion, transport and sedimentation. CASC2D-SED is applied to Goodwin Creek, Mississippi. The watershed covers 21 $\textrm{km}^2$ and has been extensively monitored both at the outlet and at several internal locations by the ARS-NSL at Oxford, MS. The model has been calibrated and validated using rainfall data from 16 meteorological stations,6 stream gaging stations and 6 sediment gaging stations. Sediment erosion/deposition rates by size fraction are predicted both in space and time. Geovisualization, a powerful data exploration technique based on GIS technology, is used to analyze and display the dynamic output time series generated by the CASC2D-SED model.

• Earthquakes and Structures
• /
• v.15 no.2
• /
• pp.123-132
• /
• 2018

In this paper the strain energy density (SED) model is used to analyze the seismic behavior of suspen-domes and a new criterion is established for judging the seismic failure based on a characteristic point in the SED model. Firstly, a nonlinear time-history response analysis was carried out using the finite-element package ANSYS for typical suspen-domes subjected to different ground motions. The seismic responses including nodal displacements, ratios of yielding members, strain energy density and structural maximum deformation energy were extracted corresponding to the increasing peak ground acceleration (A). Secondly, the SED sum ($I_d$) was calculated which revealed that the $I_d-A$ curve exhibited a relatively large change (called a characteristic point) at a certain value of A with a very small load increment after the structures entered the elastic-plastic state. Thirdly, a SED criterion is proposed to judge the seismic failure load based on the characteristic point. Subsequently, the case study verifies the characteristic point and the proposed SED criterion. Finally, this paper describes the unity and application of the SED criterion. The SED method may open a new way for structural appraisal and the SED criterion might give a unified criterion for predicting the failure loads of various structures subjected to dynamic loads.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.1
• /
• pp.87-95
• /
• 2012

In this study, the following conclusions were obtained from an investigation of the effect of the simulation time step on the simulation results of the two-dimensional, vertically averaged sediment transport model SED2D and an analysis of the deposited sediment distribution in suspended sediments of reservoirs according to grain size. The simulation time step has a significant effect on the deposited sediment distribution in a reservoir. In particular, if the simulation time step is set to be excessively large, physically invalid results are obtained. Additionally, in order to determine an appropriate simulation time step for SED2D, the selection of a simulation time step that will allow the analysis of the suspended sediment concentration profile at the main points of the simulation domain is necessary. The deposited sediment distribution in a reservoir according to grain size, including suspended sediments of clay, silt, and sand, was successfully simulated. Such information will prove valuable in application to the establishment of efficient management and reduction measures of reservoir sediment deposits.

• Journal of Wetlands Research
• /
• v.14 no.4
• /
• pp.715-723
• /
• 2012

The Hoelyongpo in the Naeseong River as tributary basin of the Nakdong River is broadly well-known a tourist attraction, which is made of sandy beach, and is called "Island of Inland". But Construction of the Dam was planned at upstream of river. In other words, an influx of sediment is blocked from upstream of river. In this situation, through sediment discharge coming from tributary of the Naeseong river, the whether to go ahead of sand beach of the Hoelyongpo is analyzed by using 1-D and 2-D model. The sediment discharge is estimated through ratio raw with basin area, and the instream flow requirement of river coming from dam and the flow rate and sediment coming from tributary are inputted for model. The 1-D model uses HEC-6 and the 2-D model uses SMS(RMA2 and SED2D). The analysis using the HEC-6 is performed from cross section data 10 year ago to the present cross section. Consequently, Yang equation presenting similar result to the present cross section data is determined, using this, the prediction is conducted for the cross section after 20 years. The 2-D analysis is conducted for the present cross section data. The value of distinction between a deposition and erosion with the results presented in the 1, 2-D models is occur, however, the appearance between the deposition and the erosion is similar.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.1
• /
• pp.94-104
• /
• 2004

The purpose of this study is to analyze various hydraulic characteristics using SMS (Surface Water Modeling System) RMA2 model. It is based on 2-D finite element method. River reaches (13.8km) from Gyeongan gauge station to the inlet of Paldang lake was selected. Finite element was made by RIMGIS Data, and the analysis of river-changes was operated by unsteady flow. The sediment concentration and bed change was simulated using SED2D model. This River's velocity was distributed that 0.05~3.85m/s and bed change was changed about 0.0003~0.0135m.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1551-1555
• /
• 2006

효율적인 댐 운영 및 관리를 위하여 퇴사유입으로 인한 저수용량의 감소에 대한 정량적인 분석이 필수적이다. 본 연구의 대상지인 소양호는 소양강댐이 준공된 1973년을 기준으로 매 10년마다 세부측량을 통한 퇴사량 조사가 실시되고 있다. 기존의 조사에서는 장기적인 퇴사량 예측을 위해 U.S.B.R의 경험적 면적감소법과 90년대 초반부터는 1차원 모형인 HEC-6가 적용되어 왔다. 그러나 기존의 방법은 저수지 내 퇴사의 횡방향 분포는 고려할 수 없다는 단점이 있다. 이를 보완하기 위해 저수지 횡단방향으로의 퇴적과 세굴을 모의할 수 있는 2차원 이상의 모형이 적용되어야 한다. 본 연구에서는 소양호의 장래퇴사분포를 모의하였다. 현재 실무에서 주로 이용되고 있는 HEC-6 모형과 2차원 수치모형인 HSCTM2D(Hydordynamics, Sediment and Contaminant Transport Model)모형 및 SMS-SED2D 모형을 비교한 후 SMS-SED2D 모형을 소양강댐 유역에 적용하였다. 또한 모형의 매개변수 보정을 위하여 퇴사량 조사용역으로 수행된 1983년과 2005년의 실측횡단자료를 이용하였으며, 향후 소양강댐의 관리를 위한 기초자료로의 활용을 위하여 댐 축조후 50년, 100년후의 저수지내 퇴사분포를 모의하였다.

• Journal of Wetlands Research
• /
• v.19 no.4
• /
• pp.542-550
• /
• 2017

The estimations of flow characteristics and river-bed erosion or sedimentation are very important for hydraulic structure design, floodplain management, and especially, river management. The objective of the study is therefore to estimate the change of flow characteristics and river-bed change due to a hydraulic structure construction. With 11.65 km study area of the Geum River which are located in downstream of Daecheong Dam, flow characteristics and river-bed change were estimated based on the RMA2 and SED2D model. As the result of the study, the increase of river-bed sedimentation in upstream and river-bed erosion in downstream were occurred by the construction of hydraulic structure.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2003.10a
• /
• pp.519-522
• /
• 2003

The purpose of this study is to analyze various hydraulic characteristics using SMS (Surface Water Modelling System) RMA2 model. It is based on 2-D finite element method. River reaches (13.8km) from Gyeongan gauge station to the inlet of Paldang lake was selected. Finite element was made by RIMGIS Data, and the analysis of river-changes was operated by unsteady flow. The sediment concentration and bed change was simulated using SED2D model.

• Journal of Korean Society of Disaster and Security
• /
• v.12 no.2
• /
• pp.35-45
• /
• 2019

The enlargement and reduction of river channels can not only change the flow of water but also alter sedimentation patterns, thus hindering smooth flood conveyance. Accordingly, this study aims to analyze the effects of the sudden enlargement of river channels on changes in the riverbed and river flow. For this purpose, as part of the "Hometown River" Construction Project, this study examined the local river Kyungpo-cheon, which a section of the river channel was widened by at least two- to three-fold, using RMA-2 and SED-2D models to simulate the changes in flow characteristics and riverbed variation due to the widening of the channel. The results of the study indicated that widening the Kyungpo -cheon river channel secured its dimensional stability in comparison to before widening. however, due to a flood frequency of more than once per year, future maintenance and management will be costly and time-consuming.

• Journal of Korea Water Resources Association
• /
• v.51 no.1
• /
• pp.61-70
• /
• 2018

This study examined how to determine the optimal sediment level in dam reservoir for efficient plan and operation of dam. Currently, Korea is applying a horizontally accumulated method for sediment level estimation for the safety design of dam and so the method estimated relatively higher level than others. However, the sediment level of dam reservoir should be accurately estimated because it is an important factor in assessing life cycle of a dam. The sediment level in dam reservoir can be determined by SED-2D model linked with RMA-2, horizontally accumulated method, area increment method, and empirical area reduction method. The estimated sediment level from each method was compared with the observed sediment level measured in 2007 in Imha dam reservoir, Korea and then the optimal method was determined. Also, the future sediment level was predicted by each method for the future trend analysis of sediment level. As the results, the most accurate sediment level was estimated by the empirical area reduction method and the future trend of sediment level variation followed the past trend. Therefore, we have found that the empirical area reduction method is a proper one for more accurate estimation of sediment level and it can be validated by the results from a numerical model of SED-2D linked with RMA-2 model.