• Journal of Periodontal and Implant Science
• /
• v.37 no.3
• /
• pp.585-597
• /
• 2007

The present study was performed to evaluate the effect of Tetracycline-HCI and Saline on the change of implant surface microstructure and surface roughness according to application time. Implants with resorbable blasting media surface were utilized. Before test all 13 implants were measured surface roughness. Among them, 6 implants were rubbed with 50mg/ml Tetracycline-HCl solution and other 6 implants with saline for $\frac{1}{2}$min., 1min., $1\frac{1}{2}$min., 2min., $2\frac{1}{2}$min and 3min. Then, specimens were processed for scanning electron microscopic observation and surface roughness after test. The results of this study were as follows. 1. Control group showed a few irregular, rough, uneven surface with crater-like depression. 2. The test group with Tetracycline-HCl conditioning showed an altered surface when Tetracycline-HCl was applied for 30secs, and showed a various surface alteration as application times go on. 3. The test group with Saline conditioning showed no significant surface differences and surface roughness. 4. The significant increase of Ra value was showed when Tetracycline-HCl was applied for 30secs. In conclusion, the 50mg/ml Tetracycline-HCl must not be applied for the RBM surface implant for surface treatment.

• Restorative Dentistry and Endodontics
• /
• v.21 no.1
• /
• pp.218-226
• /
• 1996

This study was performed to evaluate the possibility of pulpal damage by measuring temperature change occured in dentin according to the thickness of dentin, the time of irradiation and the output of laser energy when the dentin surfaces were irradiated with Nd-YAG laser under water coolant and no water coolant. Sound upper and lower molar teeth were sectioned with 1mm, 1.5mm and 2mm thickness of dentin discs and divided into 4 groups by dentin thiness. 0.5 watt, 1 watt, 1.5 watt and 2 watt-energied beam of pulsed 10 p.p.s of Nd : YAG laser was applied respectively to dentin surfaces for 8 secs and 16 secs when water coolant is used or not.Ant then the temperature changes occurd in dentin were measured at opposite surfaces of laser-irradiated dentin surfaces with digital thermometer. The results were as follow. 1. When the amount of irradiated energy was same, the temperatue changes of dentin were higher as the thickness of dentin discs was thinner(p<0.01). 2. When the amount of irradiated energy and the thickness of dentins were same, The temperature changes of dentin were lower under water coolant than under no water coolant in all groups(p<0.01). 3. With the increase of time of irradiation, the temperature changes of Dentin became higher in all groups and were steeply increased at initial period of irradiation of laser. 4. Under the same thickness of dentin, the temperature changes of dentin became higher as irradiated energy was increased. These results suggest that when the beam of Nd : YAG Laser is irradiated to dential hard tissue, amount of irradiating energy, thickness of dentin, using water coolant must be considered in order to minimize thermal damage of the pulp.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3426-3433
• /
• 2015

Three baggage allocation methods of passenger-baggage hybrid train in restricted railway transportation capacity including round conveyor system, vertical circulation system, and horizontal circulation system are presented. Loading/Unloading time is calculated based on the volume transported from Busan to Seoul via Daegu, Daejeon, and Osong with the parcel company P's logistics data. The horizontal circulation system shows less baggage volume capacity to be allocated and the maximum loading/unloading time with 434 secs. The vertical circulation system presents more loading time, but it shows best result with 408 secs. Loading/Unloading times are compared for each system and useful method is presented to improve transportation efficiency of the train.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.18 no.1
• /
• pp.11-15
• /
• 2007

Background and Objectives: $VoCoM^{(R)}$ is a set composed of prefabricated hydroxylapatite implants and shims of various sizes that are designed for the type I thyroplasty, Authors aimed to evaluate the efficacy of $VoCoM^{(R)}$ System in type I thyroplasty. Materials and Method: Twenty three patients with unilateral vocal cord palsy were included in the study, who received type I thyroplasty with $VoCoM^{(R)}$ between May 2000 and May 2007 in St. Mary's Hospital, The Catholic University of Korea, Seoul, Korea, Acoustic, aerodynamic and stroboscopic analyses were performed pre-and post-operatively, Subjective voice improvement was analysed by Voice handicap index, Results : Preoperative jitter was $4.68{\pm}2.46%$ and improved to $3.19{\pm}1.94%$(P<0,05), Preoperative NHR was $0.26{\pm}0.1$ and improved to $0.18{\pm}0,07$(P<0.05), Preoperative MPT was $6.16{\pm}4.9$secs improved to $9.55{\pm}4.67$secs(p<0.05), The postoperative stroboscopy revealed an effective medialization of vocal fold of all patients, Conclusion: Type I thyroplasty using $VoCoM^{(R)}$ is a efficient, safe and convenient way of vocal fold medialization at the expense of its high cost and difficulty in removal.

• Korean journal of applied entomology
• /
• v.42 no.4
• /
• pp.293-300
• /
• 2003

This study examined the foraging activities and the Influence of excessive foraging activity by B. ignitus workers on the quality of cherry-tomato fruits in cherry-tomato green-house. The peak time of pollination by B. ignitus worker was recorded at 8:00 and the average of foraging time on each flower was 11.7 secs. The total pollinating time of B. ignitus was 41 mins and 37 secs and its total number of visiting flowers was 195.2. The average time of staying on flowers was 8.8 ${\pm}$5.4 secs when two bumblebees were allowed to pollinate per Pyong (3.954 square yards) in the green house of tomatoes for 24 hours, but it was two times shorter (4.0${\pm}$3.1 secs) compared with that when one bumble-bee was allowed to pollinate per Pyong for one hour. The stamen color of tomato flowers visited by the bumblebee for one hour was brown while the stamen color for 24 hours was dark brown due to the frequent visiting. The average fruit bearing rate of the 4th-6th clusters of tomatoes visited for one hour was 48.9%, which was not significantly different from those allowed to visite for 24 hours. However, the number of seeds of flowers visited for 24 hours was 64.0, which was more than 55.3 seeds of flowers visited for one hour. The weight of fruit was 25.4 g and 24.4 g, respectively. The sweetness was not different significantly between one and 24 hours of visit (P > 0.05). The result revealed that end pro-duct of cherry-tomato was not influenced by over foraging activity of B. ignitus workers on tomato flowers.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.37-42
• /
• 2007

A network of MAC type was constructed in the Gyeonggi-do area to analyze the usefulness and validity of the Network RTK-GPS. Six sites were selected to conduct GPS observation for 24 hours, and by determining the ITRF of each site, coordinates were determined in connection with IGS network. Then check points which were established in Gimpo area were observed at least 7 times by Network RTK at 20 secs of retrieval intervals. The result showed high accuracy in the difference between the coordinates determined immediately by the in-field network survey and the current performance was 1-2cm. Its biggest benefit is the expanded range of survey and efficiency of practice. In summary, it is proved that a network survey has the accuracy, scalability and efficiency and it is expected that the network survey will contribute to the cadastral survey.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.4
• /
• pp.408-413
• /
• 1995

We investigated the effect of mechanical backside damage upon minority carrier recombination lifetime measurement in Czochralski silicon substrate by laser excitation/microwave reflection photoconductance decay method. The intensity of mechanical damage was evaluated by X-ray double crystal rocking curve, X-ray section topography and wet oxidation/preferential etch methods. The data indicate that the higher the mechanical damage intensity, the lower the minority carrier lifetime, and the threshold full width at half maximum value which affect minority carrier lifetime measurement is about 13 secs.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.447-447
• /
• 2000

This paper proposes an Object-oriented model for Generic Equipment Model(GEM) which is applied to semiconductor processing Equipment. A proposed implementation model for GEM consists of three modules : a module to convert SECS-II message and a module to transmit messages between GEM and a physical equipment. The proposed Object-oriented model for GEM has advantages in reuse and user management from the point of view of development program. Especially, this paper proposes a GEM agent COM, which is a base of GEM, transmits messages and events among modules. This Object-oriented model is analysed and developed by using UML.

• Journal of Sensor Science and Technology
• /
• v.6 no.6
• /
• pp.437-444
• /
• 1997

A potentiometric L-lysine-selective sensor is described for the direct determination of lysine. The sensor system is based on a carbon dioxide gas sensing electrode and an L-lysine decarboxylase immobilized to CNBr-activated sepharose 4B. A highly selective L-lysine sensor has been prepared with immobilizing enzyme slurry put into reaction buffer solution. The optimum conditions for the measurement were evaluated by various experiments. This sensor exhibits a linear response to L-lysine concentrations from $10^{-4}M$ to $10^{-1}M$. Response time of this lysine sensor is shorter than 30secs and the immobilized enzyme slurry is stable over one year.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.323-326
• /
• 2008

This paper describes some field multiplication algorithm over GF($2^m$) on 8-bit processor. Through performance comparisons among algorithm, we show that our proposal is faster than existing algorithms. The proposed algorithm save 26.38% of running time compared with naive comb multiplication algorithm which is a kind of lookup-table (LUT) based algorithm. With the proposed algorithm, a scalar multiplication over GF($2^{163}$) can be computed within 1.04 secs on 8-bit MICAz sensor mote.