• Korean Journal of Agricultural Science
• /
• v.42 no.2
• /
• pp.111-116
• /
• 2015

Combined applications of rice bran with pine leaves were tested to examine the inhibitory effects to paddy weeds and increased yield of rice for developing techniques of environment-friendly weed management in paddy rice fields. Weed control efficacy at 60 days after treatment was improved to 88.8% by combined application of rice bran with pine leaves, while weed control efficacy by single application of rice bran showed 67.5%. The other weed control efficacy combined with chestnut leaves and barley straws were 76.3% and 69.9% respectively. Combined application of rice bran with pine leaves was more effective to broadleaf weeds such as Monochoria vaginalis. Weed control efficacy by combined application with pine leaves was 100% until 70 days after rice transplanting and maintained weed control effect up to 90 days after transplanting. Rice yield by combined application of rice bran with pine leaves was 526 kg/10 a, which was higher yield than by combined application with barley straws, single application of rice bran, natural snail application and hand weeding.

• Journal of the East Asian Society of Dietary Life
• /
• v.1 no.1
• /
• pp.53-75
• /
• 1991

To examine the main party of royal family in the Man Kyong Jeon, the authors analyzed“Jin Chan Eui Gue”, which is a historical record published in 1887(King Go-Jong). The results obtained from the study were as follows, 1. The dining tables were divided into two:fixed arranging tables(131) and taking-away tables. 2. Food and flowers were distributed to the 1238 attendants. 3. According to the status or class of the attendants, the pattern or size of table settings were differentiated in the kinds of food, hights of food, flowers china ware etc. 4. The seat of the King's Grand Mother was located facing the south. 5. Red silk table cloth was used in the main party. 6. At the main party for the King's Grand Mother, dishes were arranged in the following sequence, the first line : cakes made of flour, oil and honey etc. the second : oil and honey pastry the third : fruits the fourth : rice cake etc. the fifth : cooked meat and fried fish etc. the sixth : sliced raw fish and beverage etc. the seventh : noodles, soup and soy bean sauce the eighth : spoon and chopsticks. 7. In the arrangements of tables for the King's Grand Mother, the heights of food on the dishes were as following level, a dish : 1 chok and 5 chon (1척 5촌) 27 dishes : 1 chok and 3 chon (1척 5촌) 7 dishes : 1 chok. (1척)

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.3
• /
• pp.395-401
• /
• 2011

Objective: This study examined the effects of working chair that was developed for farmers who work in grapevine's cluster thinning. Background: Agricultural work involves some of the nation's highest occupational risk exposures. Fruit cultivation has been recognized as one of the most hazardous crops in which to work. Grapevine cluster thinning task involve activities related to the main risk factors associated with upper limb work-related musculoskeletal disorders. Method: An experiment was designed to test the working chair. Six healthy male($25.8{\pm}4.9years$) were selected as the subjects for this study. Electromyography(EMG) was used to monitor the muscles activity, and Electro-goniometer was used to measure the ranges of motions of the elbow, trunk and knee. Subjective test was also carried out to examine discomfort body parts and their pain intensity. A grapevine's working space was built for the experiment and working chair was installed on it. In order to examine the muscle activity and range of motion, subjects used to the working chair for 30 minutes for each experimental condition. Another test without working chair was also performed for comparison. %MVC was used to quantify the level of muscle activity. Results: Decreases of muscle activity was found in all leg muscles and significant decrease of muscle activity was found in left Gastrocnemius. The range of motion of the trunk and knee also decreased when working chair used. Discomfort in lower back, thigh and shank region were reduced significantly. However, in upper limbs muscle activity tended to increase in working chair compared with conventional task. Conclusion: Improvement for cushion in seat back and pan required to reduce discomfort in buttocks. Application: Overall findings verified that the working chair might help to prevent upper limb and lower back MSDs based on the current study. These results can be practically used for work improvement for the grapevine growers to prevent MSDs.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.11
• /
• pp.1623-1630
• /
• 2010

In this study, effective forming methods for reducing the roll-over of a sector tooth, which is a main component of an automotive seat recliner, are proposed. Due to the large amount of roll-over, accurate contact between the inner gear of a sector tooth and the outer gear of a pawl tooth cannot be normally achieved; thus sensitivity and safety for the passengers decrease. To overcome the aforementioned drawback, we investigated the effect of flowcontrol forming methods involving local embossing die, coining punch, and VIC (Variable Inverse Clearance) on the roll-over depth by FE-analysis and an experiment. The results of a fine-blanking experiment for verifying the proposed methods showed that VIC type is decidedly superior from the aspects of reduction of roll-over and tool strength of the sector tooth.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.357-362
• /
• 2008

This study have goal with reverse engineering for petrochemistry of high pressure ball valve for localization. Ball valve for development accomplished with flow analysis based on provision of ANSI B16.34, ANSI B16.10, ANSI B16.25 In order to localize the petrochemistry high pressure control valve. Numerical simulation using CFD(Computational Fluid Dynamic) in order to predict a mass flow rate and a flow coefficient form flow dynamic point of view. The working fluid assumed the water($H_2O$). The valve inlet and outlet setup a pressure boundary condition. The outlet pressure was fixed by atmospheric pressure and calculated inlet velocity 5m/s. CFD solver used STAR-CCM+ which is commercial code. The result shows change of mass flow rate according to opening and closing angle of valve. Flow decrease observed open valve that equal percentage flow paten which is general inclination of ball valve. The structural analysis used ANSYS which is a commercial code. Stress analysis result of internal pressure in valve showed lower than yield strength. This is expect to need more detail design and verification for stem and seat structure.

• Journal of the Ergonomics Society of Korea
• /
• v.25 no.3
• /
• pp.25-32
• /
• 2006

As national income increases, consumers began to place a great deal of weight on products or quality of their life. They would like to have products which are more convenient to use and could meet their emotional desire in addition to its basic functional requirements. An automobile is one of the transportation system for human beings and the factor such as safety or environmentaly-friendly is regarded as important things resulting from it's popularization. In fact, domestic design technology leaves much to be desired compared with excellent manufacturing techniques. For this reason, some problems, like lowering of usage, could be caused by introducing technological data as it is from overseas. A survey of domestic car users has found that the most preferred condition (step height) is 460~495cm when they get in and out of their car. Men use their visual information and then get in the car, taking motion fit for each condition when automobile condition is changed. In other words, men get in cars actively within the range of conditions used for this study. These results were found from a motion study, when getting in a car, and checking the possibility of getting injury in accordance with the change of condition as well.

• Journal of Arbitration Studies
• /
• v.25 no.2
• /
• pp.3-17
• /
• 2015

For many years commentators have requested more active regulation of attorney ethics in international arbitration. Gradual deterioration of ethical standards in international arbitration will bring disrepute and, once its reputation is lost, it could take decades to rebuild confidence. The first reason for increasing unethical behavior is that there is no ethical code generally applied to all lawyers participating in international arbitration. A second reason might be that nobody is actively regulating attorneys in international arbitration. The first step to solve this problem is that major arbitration institutions should cooperate to enact a uniform code of conduct to be generally applied to all attorneys representing parties in international arbitration. Recently, IBA and LCIA prepared guidelines on party representation in international arbitration, and the guidelines will help attorneys follow uniform standardsof ethics. However, this will not be sufficient. There should be a regulating body to monitor attorney ethics and take sanctions against unethical attorneys accordingly. Arbitrators, who can see unethical behavior by attorneys from the closest distance, are the most appropriate regulating force rather than courts of arbitration seat or an attorney's licensing country. Of course, arbitrators don't have powers to withdraw or suspend an attorney's license, but they have powers to control attorneys'behavior within arbitration proceedings such as an allocation of fees and costs, barring the assertion of claims or defenses, drawing adverse inferences, or precluding the submission of evidence or testimony. Furthermore, arbitrators should be provided with such obligation as active control of attorney ethics. Even arbitration institutions should participate by imposing on an attorney who is a repeat offender a suspension from appearing in future arbitrations. Unethical behavior will decrease through concerted actions among arbitrational institutions to introduce a uniform code of conduct and to empower arbitrators for more efficient regulation of attorney ethics.

• Corrosion Science and Technology
• /
• v.9 no.6
• /
• pp.310-316
• /
• 2010

Recently a fuel oil of the diesel engine of the marine ship is being changed with heavy oil of low quality as the oil price is higher more and more. Therefore the wear and corrosion in all parts of the engine such as cylinder liner, piston crown, spindle and seat ring of exhaust valves are predominantly increased. In particular the degree of wear and corrosion of piston crown is more seriously compared to the other parts of the engine due to operating in severe environment such as the high temperature of exhaust gas and repeating impact. Thus the repair weldment of the piston crown is a unique method to prolong the its life in a economical point of view. In this case, filler metals having a high corrosion and wear resistance such as stellite 6, Inconel 625 and Inconel 718 are mainly being used for repair welding. However it has been often happened that piston crown on the ship,s job site is being actually inevitably welded with mild filler metals. Therefore in this study, filler metals such as E4301, E4313 and E4316 were welded at SS401 steel as the base metal, and corrosion property of their weld metals in the case of post weld heat treatment or not was investigated with some electrochemical methods such as measurement of corrosion potential, cathodic and anodic polarization curves, cyclic voltammogram and polarization resistance etc. in 0.1% $H_2SO_4$ solution. Corrosion resistance of the weld metal of E4301 was better than the other weld metals in the case of no heat treatment, however, its resistance was considerably decreased with post weld heat treatment(annealing:$625^{\circ}C$, 2 hr) compared to other weld metals. The weld metals of E4313 and E4316 showed a relatively good corrosion resistance by post weld heat treatment.

• Structural Engineering and Mechanics
• /
• v.39 no.1
• /
• pp.125-145
• /
• 2011

Pushover analysis has gained significant popularity as an analytical tool for realistic determination of the inelastic behaviour of RC structures. Though significant work has been done to evaluate the demands realistically, the evaluation of capacity and realistic failure modes has taken a back seat. In order to throw light on the inelastic behaviour and capacity evaluation for the RC framed structures, a 3D Reinforced concrete frame structure was tested under monotonically increasing lateral pushover loads, in a parabolic pattern, till failure. The structure consisted of three storeys and had 2 bays along the two orthogonal directions. The structure was gradually pushed in small increments of load and the corresponding displacements were monitored continuously, leading to a pushover curve for the structure as a result of the test along with other relevant information such as strains on reinforcement bars at critical locations, failure modes etc. The major failure modes were observed as flexural failure of beams and columns, torsional failure of transverse beams and joint shear failure. The analysis of the structure was by considering all these failure modes. In order to have a comparison, the analysis was performed as three different cases. In one case, only the flexural hinges were modelled for critical locations in beams and columns; in second the torsional hinges for transverse beams were included in the analysis and in the third case, joint shear hinges were also included in the analysis. It is shown that modelling and capturing all the failure modes is practically possible and such an analysis can provide the realistic insight into the behaviour of the structure.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.2 no.1
• /
• pp.54-64
• /
• 1984

This paper is a study on structural measurement by using a terrestrial camera. The aim of this paper is to understand the method of a composition by analyzing the geometrical compositive ratio of threestoried pagodas at Gamun-Sa, Gosun-Sa, Bulguk-Sa, Seated iron Buddha in Kwang-Jn, and Main-Seat Buddha at Sukkuram Cave-temple. Measured data and contour maps are accurately obtained by means of photogrammetry, and the following points are able to he found by analyzing them. At first, for Stone Pagodas. the breaths of the Okgesuks are made to the ratio, 8 : 7 : 6. And when an equililateral triangle and an 45$^{\circ}$ isosceles triangle are drawn of which the bases are the length of the upper Gabsuk, and then a circle is drawn whose radius is the length between the vertexes of the two triangles and its center is the vertex of the former the circle passes the upper line of the third Oksin. Also it can be found that an $70^{\circ}$ isosceles triangle being drawn at base line, the triangle passes the edge point of the upper Gabsuk and the center of the third Okgesuk. Also for Budha statues, it can be found that circles whose center is that of eyes can be drawn, and if 2 lines which pass the shoulder and the center of Buddha's body are extended, they intersect the knees.