• The Journal of the Korea Contents Association
• /
• v.22 no.1
• /
• pp.274-282
• /
• 2022

In order to secure pedestrians' right to walk, we have up-cycled second hand mobile phones to overcome limitations of the existing survey methods, analysis methods, and diagnosis to reduce pedestrian traffic accidents. Second hand mobile phones were up-cycled to produce mobile CCTVs and installed in areas where pedestrian deaths rate is high to secure image data sets for the period of more than 24 hours. It was analyzed by applying image visualization technology and clouding reporting technology, and more precise and accurate results were derived through modeling based on artificial intelligence learning and GIS-based diagnostic guidance. As a result, it was possible to analyze the risk factors and number of pedestrian safety, and even factors that were not known in the existing method could be derived. In addition, the traffic accident risk index was derived by converting data into one year to verify whether second hand mobile phone up-cycling mobile CCTV will be an objective tool for finding pedestrian risk factors. Up-cycling mobile CCTV of second hand mobile phones newly applied through research can be used as a new tool to find pedestrian risk factors, and it can be used as a service to protect the safety of the traffic vulnerable other than pedestrians.

• Parasites, Hosts and Diseases
• /
• v.54 no.1
• /
• pp.1-8
• /
• 2016

Laboratory workers, in resource-poor countries, still consider PCR detection of Giardia lamblia more costly and more time-consuming than the classical parasitological techniques. Based on 2 published primers, an in-house one-round touchdown PCR-RFLP assay was developed. The assay was validated with an internal amplification control included in reactions. Performance of the assay was assessed with DNA samples of various purities, 91 control fecal samples with various parasite load, and 472 samples of unknown results. Two cysts per reaction were enough for PCR detection by the assay with exhibited specificity (Sp) and sensitivity (Se) of 100% and 93%, respectively. Taking a published small subunit rRNA reference PCR test results (6%; 29/472) as a nominated gold standard, G. lamblia was identified in 5.9% (28/472), 5.2%, (25/472), and 3.6% (17/472) by PCR assay, $RIDA^{(R)}$ Quick Giardia antigen detection test (R-Biopharm, Darmstadt, Germany), and iodine-stained smear microscopy, respectively. The percent agreements (kappa values) of 99.7% (0.745), 98.9% (0.900), and 97.7% (0.981) were exhibited between the assay results and that of the reference PCR, immunoassay, and microscopy, respectively. Restriction digestion of the 28 Giardia-positive samples revealed genotype A pattern in 12 and genotype B profile in 16 samples. The PCR assay with the described format and exhibited performance has a great potential to be adopted in basic clinical laboratories as a detection tool for G. lamblia especially in asymptomatic infections. This potential is increased more in particular situations where identification of the parasite genotype represents a major requirement as in epidemiological studies and infection outbreaks.

• Journal of Digital Convergence
• /
• v.13 no.8
• /
• pp.1-8
• /
• 2015

This paper focuses on analyzing Korean language learning effect through the STEAM class using a robot which is targeted on multicultural elementary school students. For the purpose of it, the degree of difficulty and interest of how students feel has been measured. By using the programing tool of Korean language entering base, they learn the programming commands like as variable, data type, branching statement, loop statement, etc in Korean, the effect of Korean learning has been measured. It has been examined two interviews at the beginning and the end of the second semester to measure the effect of Korean language learning. As a result of this research, It can be realized that multicultural children who have similar linguistic characteristics and cultural sphere understood Korean language easily when they take the Korean language class by utilizing a robot, and the class had an effect on the acquisition of Korean language for multicultural children.

• Journal of Agricultural Extension & Community Development
• /
• v.20 no.4
• /
• pp.989-1021
• /
• 2013

This paper examines the activating methods of heritage tourism by focusing on ecomuseum as regional revitalization strategy of agriculture heritage. Ecomuseum can be a vital tool to actualize the purpose of agriculture and fisheries heritage system, 'dynamic conservation' of 'a living heritage'. According to case study, Byeokgolje possesses high value to preserve and local government is planning to vitalize heritage tourism, but the system of heritage tourism is not properly equipped the four requisites for it (sincerity, educational value, entertainment, and nostalgia). Byeokgolje is insufficient system as an ecomuseum and has some challenging tasks to prepare the four requisites for ecomuseum(the legacy, museum, participation and contents) despite of high possibility. It is necessary that construct the four requisites for ecomuseum and fulfil the four requisites for heritage tourism to achieve the effect of regional revitalization by link to ecomuseum. That is, authentic contents developing, the participation of local residents, shakeholder, and creative class, site construction, academic approach, and providing the method of residents' income increasing are necessary.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.2
• /
• pp.654-670
• /
• 2020

Workers at construction sites are easily exposed to many dangers and accidents involving falls, tripping, and missteps on stairs. However, researches on construction site monitoring system to prevent work-related injuries are still insufficient. The purpose of this study was to develop a wearable textile pressure insole sensor and examine its effectiveness in managing the real-time safety of construction workers. The sensor was designed based on the principles of parallel capacitance measurement using conductive textile and the monitoring system was developed by C# language. Three separate experiments were carried out for performance evaluation of the proposed sensor: (1) varying the distance between two capacitance plates to examine changes in capacitance charges, (2) repeatedly applying 1 N of pressure for 5,000 times to evaluate consistency, and (3) gradually increasing force by 1 N (from 1 N to 46 N) to test the linearity of the sensor value. Five subjects participated in our pilot test, which examined whether ascending and descending the stairs can be distinguished by our sensor and by weka assessment tool using k-NN algorithm. The 10-fold cross-validation method was used for analysis and the results of accuracy in identifying stair ascending and descending were 87.2% and 90.9%, respectively. By applying our sensor, the type of activity, weight-shifting patterns for balance control, and plantar pressure distribution for postural changes of the construction workers can be detected. The results of this study can be the basis for future sensor-based monitoring device development studies and fall prediction researches for construction workers.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.1
• /
• pp.63-69
• /
• 2006

This study deals with the friction welding of A2024- T6 to A6061- T6; The friction time was variable conditions under the conditions of spindle revolution of 2000rpm, friction pressure of 50MPa, upset pressure of 100MPa, and upset time of 5.0seconds. Under these conditions, the microstructure of weld interface, tensile fracture surface and mechanical tests were studied, of friction weld, and so the results were as follows. 1. When the friction time was 1.5seconds under the conditions, the maximum tensile strength of the friction weld happened to be 292MPa, which is $94.2\%$ of the base material's tensile strength(310MPa). At the same condition, the maximum shear strength was 2l2MPa, which is equivalent to $103\%$ of the base material's shear strength (205MPa). 2. At the same condition, the maximum vickers hardness was Hv 146 at A2024- T6 nearby weld interface, which is higher Hv3 than condition of the friction time 0.5seconds, and the maximum vickers hardness was Hvl20 from weld interface of A6061-T6, which is higher Hv28 then base material's. 3. The results of microstructure analysis show that the structures of two base materials have fractionized and rearranged along a column due to heating and axial force during friction, which has affected in raising hardness and tensile strength.

• Nutrition Research and Practice
• /
• v.4 no.2
• /
• pp.142-148
• /
• 2010

The food frequency questionnaire (FFQ) has been used as an important dietary assessment tool in epidemiologic studies, but the usefulness of the FFQ has been debated in recent years. This study was performed to evaluate the relative validities of 3-day food records and the semi-quantitative FFQ. A total of 124 subjects finished 3-day food records (FRs) during each of the four seasons, as well as the FFQ from December 2002 to May 2004. The FFQ was a food based semi-quantitative FFQ including 103 items. Three-day FRs from each season and a randomly selected season were compared with the remaining 9-day FRs. The remaining 9-day FRs, as a reference measurement, were also compared with the FFQ. Pearson's correlation coefficients between the 3-day FRs and the 9-day FRs were between 0.14 and 0.56. Pearson's correlation coefficients between the FFQ and the 9-day FRs ranged between 0.07 and 0.41. Average proportions of classification into the same quartiles, adjacent quartiles, and distant quartiles between the 3-day FRs and the 9-day FRs were 35.8%, 40.5%, and 5.2%, respectively. On average, the proportions of classification into the same quartiles, adjacent quartiles, and distant quartiles between the FFQ and the 9-day FRs were 31.1%, 39.4%, and 6.9%, respectively. Three-day FRs showed higher correlations and higher agreement proportions of quartile classification with the 9-day FRs than did the FFQ, but both relative validities of 3-day FRs and the FFQ appear to be acceptable as dietary assessment tools. Further studies for validating food intake by reliable biomarkers are necessary.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.5
• /
• pp.558-565
• /
• 2013

In this paper, modeling and simulation for performance analysis of high resolution SAR system has been carried out in the time, frequency and numeric domain using ADS Ptolemy simulation tool of Agilent corporation. SAR system consists of antenna, controller and transceiver. Error parameters affecting SAR system performances have been defined, modeled and simulated such as phase noise of frequency synthesizer, amplitude and phase characteristic of TWTA, sampling frequency of waveform generator and I/Q imbalance. Finally, the development requirements of SAR system based on the impulse response function have been derived.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.7
• /
• pp.521-527
• /
• 2014

Most of Sea Surveillance Radar(SSR)s which are used in Vessel Traffic Service are Magnetron-based Non-Coherent Method and use the pulse integration technique having a signal to noise ratio enhancement function to satisfy a surveillance performance about target. Especially, Pulse Integration technique has an effect on target serveillance performance through signal to noise ratio, in addition, has an effect to improve a signal interference and noise spike. In this paper, we have a simulation experiment by using MATLAB simulation tool for appling a pulse integration technique in VTS system using a Non-Coherent radar, and verify an optimum pulse integration technique through out performance analysis between frequently use pulse integration techniques.

• The Journal of the Korea Contents Association
• /
• v.14 no.11
• /
• pp.686-694
• /
• 2014

Criminal profiling, also known as offender profiling is designed to predict the characteristics of unknown criminal perpetrator through an analysis of the crime scene. Until now, there has been conflict about the effectiveness of criminal profiling among academics. In this study, 113 police investigators', working in serious crime divisions, were interviewed about their experiences with criminal profiling, and their belief about its effectiveness. 63.7% of the respondents agreed that criminal profiling is a valuable investigative tool and 62.8% agreed that profilers are valuable to criminal investigations. A total of 31.8% agreed that profilers help the police identify offenders and 15.0% agreed that there is no risk of profiler misdirecting and investigation. 61.5% of the respondents who had reported using a profile agreed that profiling is helpful and 71.4% told that they would use profiling again in the future.