• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.177-179
• /
• 2008

This paper, we proposed the theoretical model which includes series resistance $R_s$ and shunt resistance $R_{sh}$ of single-crystalline PV module and used numerical method based on physics. Series resistance $R_s$ was derived from approach for p-n junction diode instead of established form obtained from the simulator with irradiance changes. Electrical output characteristics for PV modules to count the effect of $R_s$ were then studied. Finally simulation results were compared to experimental data leading to good agreement.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1810-1814
• /
• 2008

A small L-type megasonic module for nano-pattern cleaning was designed and manufactured. The impedance graph of the quartz waveguide with a piezoelectric actuator was predicted using finite element method (FEM). The peak value of the piezoelectric actuator alone was 3.373 MHz, which was the same as the experimentally measured value of 3.373 MHz (0.0% error). In addition, the maximum impedance value of the quartz waveguide with the actuator was 3.373 MHz, which agreed well with the measured value of 3.362 MHz (0.3% error). The acoustic pressures of a conventional megasonic system (3 MHz) and the developed system under similar conditions were measured and compared. The results showed that the maximum values and standard deviations of the developed system decreased by 29% and 18%, respectively, compared with the conventional type. This suggests that the small L-type would have higher particle removal efficiency with lower possibilities of pattern damages.

• Journal of Sensor Science and Technology
• /
• v.26 no.5
• /
• pp.301-305
• /
• 2017

This paper presents a wearable human health-monitoring band. The band consists of a body temperature detector (BTD) and a hear rate detector (HRD). The BTD and HRD are realized using an inkjet-printed flexible temperature sensor and a commercial heart rate sensor module, respectively. The sensitivity of the fabricated BTD was found to be $-31/^{\circ}C$ with a linearity of 99.82%. The HRD using the commercial heart rate sensor module has a good performance with a standard deviation of 0.85 between the data of a commercial smart watch and the fabricated HRD.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.74-77
• /
• 2007

In this paper, we propose a system which can display panoramic-stereopic image for tele-operating excavator. the system was implemented by using center-viewpoint corresponding algorithm and image mosaic process. We could obtain remarkable result from the survey among the ex-pert of excavator. We also design a control station with RF transfer module, H.264 codec module and suggested algorithm. Especially, our system shows a superb performance on cubic effect and presence sense of a field of excavating work.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.421-423
• /
• 2005

A bootstrap circuit for floating power supply has the advantage of being simple and inexpensive. However, the duty cycle and on-time are limited by the requirement to refresh the charge in the bootstrap capacitor. Hence, this paper deals with a design of charge pump circuit for a floating gate power supply of an IPM. The operation of the proposed circuit applied by three-phase inverter system for driving induction motor are verified through the experiments.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.8
• /
• pp.1-6
• /
• 2015

In this paper, we propose the LED(Light-Emitting-Diode) emergency lighting in a tunnel by using the thermoelectric devices. To achieve high generated power, thermoelectric device should be have high Seebeck coefficient and small contact area. Also, we reveal that a moderate heatsink required for high generated power. From the waste heat of LED tunnel lighting module (25W), the generated power was 0.062W by thermoelectric device, and it could illuminate for 1hour after charge the battery of emergency lighting during about 101hours.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.6
• /
• pp.1134-1141
• /
• 2006

Java is platform-independent and supports uniform solutions from mobile area (J2ME) to enterprise area (J2EE), so Java is a good development tool for the environment of heterogeneous machines and distributed applications. Java applications need access control module as a Java package. In this paper, we design and implement it. Therefore Java developers can reduce development time, and system managers easily do access control work. Proposed module is based on Role-Based Access Control (RBAC) model and includes a Java package and administration tool.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.147-148
• /
• 2005

As the power density and switching frequency increase, thermal analysis of power electronics system becomes imperative. The analysis provides valuable information on the semiconductor rating, long-term reliability and efficient heat-sink design. In this paper, thermal distribution of the Insulated Gate Bipolar Transistor Module has been studied with different conditions and heat sink materials. For analysis of thermal distribution, we obtained results by using finite element simulator, Ansys.

• Journal of Internet Computing and Services
• /
• v.4 no.5
• /
• pp.11-19
• /
• 2003

Since B2C(Business to Customer) from which e-commerce had originated was replaced by B2B, e-Business has shown fast growth so fa., Recently, e-Procurement by l:n concept is on the development as self-purchase system associated with their own ERP In many conglomerates in the Korean market. However, in order to vitalize e-Biz in the plant industry, we need to set up e-marketplaces where many sellers and buyers can meet each other at the same time, which has become the essential part for success as an expanded business model. In this paper, we expect that the foundation for e-transformation in the plant industry is set up by developing Purchase Process System and related modules as the prerequisite for e-Biz in the plant industry, and this report will provide an exemplary model for e-commerce. The Purchase Process System consists of 1) e-Purchasing Module that manages bidding and contract information based on quotation inquiry, 2) e-Expediting Module that manages information to guarantee the on-time delivery, 3) e-Certification Module that controls user authentification, 4) e-Basic Module that manages the bulletin boards, Q&A, etc.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.289-289
• /
• 2009

The series hybrid propulsion system in bimodal tram consists of CNG engine, generator, inverter, motor and battery as main components. Among them, battery is very important thing to make a hybrid bimodal tram more efficient in driving. Battery pack is composed of 168 LPB(lithium polymer battery) cells, 650Vdc-300A. LPB should be treated with a good consideration in both temperature and overvoltage. This paper had analyzed and investigated the thermal flow and distribution of LPB module(l4 LPB cells) and Pack in simulated environments by commercial thermal analysis tool.