• 한국전자통신학회논문지
• /
• 제9권11호
• /
• pp.1255-1266
• /
• 2014

본 논문에서는 오픈 모바일 플랫폼인 안드로이드를 리눅스 커널을 기반으로 하는 ARM Cortex-A8 Core를 사용한 SAMSUNG의 S5PV210 CPU를 장착한 MPU 모듈, Base 보드 모듈 및 센서 모듈을 제작하여 실시간 프레임워크를 설계함으로서 효율적인 산업용 제어를 가능하게 하였다. 센서 모듈에서 획득한 온도 및 습도 데이터는 하이브리드 어플리케이션을 개발함으로서 Web Server를 통하여 데이터베이스에 저장된 후 클라이언트 User가 온도 및 습도 데이터를 스마트 폰에서 확인 함으로서 실시간 프레임워크 설계의 적합성 및 타당성을 검증한다.

• 한국산학기술학회논문지
• /
• 제8권6호
• /
• pp.1394-1401
• /
• 2007

안전한 접근제어는 많은 수의 사용자와 정보자원을 가지고 있는 대규모의 조직, 정보시스템에서 매우 중요한 관심사이다. 많은 경우에 시스템 개발자들은 응용 시스템의 일부로서 접근제어 모듈을 구현해야 한다. 이러한 방식은 접근제어 모듈의 수정을 어렵게 하고, 새로운 응용 시스템을 개발할 때마다 반복적으로 접근제어 모듈을 개발해야 하는 문제가 있다. 본 논문에서는 Java를 사용하는 개발 환경을 위한 접근제어 Java API 라이브러리의 구현에 대해 제시한다. 개발자들은 제안된 라이브러리를 활용하여 쉽게 접근제어 모듈을 구현할 수 있다. 제안된 라이브러리는 주요 접근제어 모델뿐만 아니라 도메인 기반, 객체 중심의 접근제어와 같은 새로운 모델도 지원한다. 또한 여러 접근제어 모델을 동시에 적용할 수 있는 기능을 포함하고 있다.

• 한국기계기술학회지
• /
• 제20권6호
• /
• pp.924-928
• /
• 2018

The objective of this study is to solve a problem that is occurred during the spline machining of tubular shaft yoke in both side IMS module. In order to simulate the problem, the movement direction of upper die was set as standard case and error case. The material of tubular shaft yoke was set to S20C as refer to the analysis library. The movement directions of upper die were separated with standard case and error case. The error case was set to simulate the problem in the spline machining of tubular shaft yoke. In order to solve the problem, the outer radius of upper die were modelled from 9.40mm to 9.44mm. The simulation results were analyzed and compared in terms of effective stress, metal flow line and folding phenomena characteristics. In case of the outer radius of upper die was 9.42mm, it was observed a relatively uniform effective stress distribution and had a straight metal flow line.

• 방사선산업학회지
• /
• 제17권4호
• /
• pp.359-367
• /
• 2023

In this study, the function and purpose of the disposal cover, which is an engineering barrier installed to isolate the disposal vault of the near-surface disposal facility for radioactive waste from natural/man-made intrusion, and the design details of the demonstration facility for performance verification were described. The Demonstration facility was designed in a partially divided form to secure the efficiency of measurement while being the same as the actual size of the surface disposal facility to be built in the Intermediate & low-level radioactive waste disposal site of the Korea Radioactive Waste Agency (KORAD). The instruments used for measurement consist of a multi-point thermometer, FDR (Frequency Domain Reflectometry) sensor, inclinometer, acoustic sensor, flow meter, and meteorological observer. It is used as input data for the monitoring system. The 3D monitoring system was composed of 5 layers using the e-government standard framework, and was developed based on 4 components: screen, control module, service module, and DBIO(DataBase Input Output) module, and connected them to system operation. The monitoring system can provide real-time information on physical changes in the demonstration facility through the collection, analysis, storage, and visualization processes.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.11-14
• /
• 2004

This paper presents an implementation of compact vector control system for induction motor using a digital signal processor (DSP) and a smart power module (SPM). The DSP TMS320F2812 has most necessary functions for ac motor control in a single chip and SPM provides a compact power stage. The indirect vector control algorithm is implemented in the drive system using these devices. The developed system is applied by 0.8kW induction servo motor and the all functions are verified through the experiments.

• Journal of Power Electronics
• /
• 제9권3호
• /
• pp.410-417
• /
• 2009

This paper represents a design and implementation of a digital controller for a multi-phase synchronous buck converter (SBC) using a digital signal processor (DSP). The multi-phase SBC has generally been used for a voltage regulation module (VRM) of a microprocessor because of its high current handling capability at a low output voltage. The VRM requires high control performance of tight output regulation, high slew rate, and load sharing capability of multiple converters. In order to achieve these requirements, the design and implementation of a digital control system for a multi-phase SBC are presented in this paper. The digital PWM generation, current sensing, and voltage and current controller using a DSP TMS320F2812 are considered. The experimental results are provided to show the validity of the implemented digital control system.

• 정보와 통신
• /
• 제28권11호
• /
• pp.16-23
• /
• 2011

휴대폰은 스마트화되면서 퍼스널 컴퓨터에 버금가는 성능으로 발전하고 있다. 또한 모바일 환경에서 높은 데이터 전송 속도 및 많은 사용자가 동시에 사용할 수 있는 시스템을 적용하고 있다. 차세대 이동통신서비스나 B4G(Beyond 4 Generation)에서는 다중밴드/다중 모드/다중경로 처리구조의 융합 단말기가 시장을 형성하게 되며, 갈수록 휴대폰의 RF Front-End는 복잡하게 된다. 또한 FEM(Front End Module)의 성능은 단말기 시스템의 품질(QoS, Quality of Services)을 좌우하는 핵심부품으로 High Data Rate를 위하여 고성능화가 요구되고 있다. 본고에서는 FEM의 발전 트랜드와 구성하는 블록도 및 주요 핵심부품의 특성과 모듈의 소형화 패키징 기술에 관하여 제시하였다. 또한 4G LTE와 Wimax듀얼밴드 Tx/Rx통합 FEM을 소개하였고, 향후에 구성되게 되는 Future FEM의 블록도를 제시하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.1109-1112
• /
• 2004

This study reports on the pressure relief design and braided composite of surge arrester. Surge arresters with porcelain housing must not have explosive breakage of the housing to minimize damage to other equipment when subjected to internal high short circuit current. As a solution, this study describes pressure relief design performance of arresters with braided composite module. In general, braided composite has Potential for improved impact and delamination resistance. Manufacturing processes of the braided composite could also be automated and could potentially lead to lower costs. Therefore, in consideration of characteristics of pressure relief for polymer arrester, the fabric pattern of braided composite was decided. And Polymer arrester module was manufactured with braid. The mechanisms of pressure occurrence and relief were investigated basically by analyzing arc energy and the correlation between thermal shock and indoor pressure in pressure relief test.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.219-221
• /
• 2005

Various adjustment devices which present automobile uses electric motion motor of reducer built-in type for user's convenience are increasing. The example are seat control motor, sunroof motor, power windows motor etc. To get low noise, high effectiveness special quality in automobile DC motor of reducer built-in type, reducer department's transmission efficiency and noise, vibration quality are very important. The reducer used to DC motor of automobile reducer built-in type use worm gear for enough torque and proper number of rotation. We need optimization design technology of deceleration module including worm gear and housing for reducer development that have special quality of good quality.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1542-1547
• /
• 2003

This paper represents the solar collector performance with type of an evacuate double glass, and a copper tube was installed in center of collector to get a solar thermal energy. The one module of solar collector and artificial sun were used in this experiment The distance between artificial sun and solar collector was fixed at 0.5m, and this experimental condition was focused on winter season. The experiments were carried out. three times for getting a accurate data and the heat amount of one module evacuate d solar collector was estimated at out. 48 kcal/hr.