• Journal of the Korean Vacuum Society
• /
• v.15 no.2
• /
• pp.180-185
• /
• 2006

Microwatt power level at relatively high voltage(order of volt) was produced by $Bi_{0.5}Sb_{1.5}Te_{3}/Bi_{2}Te_{2.4}Se_{0.6}$ thin film thermoelectric generators, and maximum output power varied with temperature difference in the square-law relation. Output voltage and current were possible to control by changing the way of electrical connection as well as the number of stacking plate-modules. Variation of open circuit voltage and short circuit current with temperature difference showed a linear relationship. There were, however, some differences in variations; open circuit voltage were dependent on the number of plate-module when connected in series, but it was not for parallel connection. On the other hand, short circuit current showed the opposite behavior to the case of open circuit current.

• The Journal of the Korea Contents Association
• /
• v.9 no.4
• /
• pp.72-80
• /
• 2009

By the advent of an era of digital convergence, the user-friendly DTV graphic user interface (GUI) techniques become very important because of the explosive consumption of DTV receiving modules. This paper describes the design and implementation of GUI of menu-driven type for the operation of HDTV MPEG module. The designed GUI is convenient and user-friendly. Main menu is created by forming a new window and is located on the top area of the window in the structure of 1 by 3 matrix. Thus main menu, sub-manu, and lower-level menu can be displayed on a screen. The menu-driven DTV GUI was acomplished by using new styles and icons.

• Journal of Positioning, Navigation, and Timing
• /
• v.2 no.1
• /
• pp.19-31
• /
• 2013

It is well known that the accident of vehicles carrying hazardous materials incurs huge losses economically and socially. To detect and respond rapidly against the accident of a vehicle carrying hazardous materials, it is essential to estimate the relative navigation information between the forward tractor module and the backward trailer module of the vehicle reliably and accurately. In this paper, a precise relative positioning system based on GPS is designed, implemented, and evaluated as a prerequisite to design an effective relative navigation system for the vehicle carrying hazardous materials. An experiment using field-collected 10 Hz real GPS measurements showed that the designed relative positioning system achieves 22 cm accuracy within 15 epochs by float solutions. Also, it was found that cm-level integer solutions can be generated reliably after the quick convergence of float solutions.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.12
• /
• pp.2030-2039
• /
• 2001

Recently, various inpipe inspection robots are developed and its effective values are increased in industrial use. However, it is so difficult to make a inpipe inspection robot system which has flexible mobility and accuracy of inspection in pipelines. Especially, it is very important to know the exact crack position. In this paper, we are to present a lately developed inpipe inspection robot system which can resolve the above Problems. The robot is configured as an articulated structure like a snake. Two active driving vehicles are located in front and rear of the inspection robot respectively and passive modules such as a nondestructive testing module and a control module are chained between the active vehicles. Special feature of the robot system is a ground interface, which is able to show informations of robot and pipelines. By using this, so called virtual map in this paper, user is able to know the pipelines'feature and crack position.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.8
• /
• pp.1085-1091
• /
• 2011

This paper describes a design and implementation of monitoring applications on shipboard integration network. A wrapping module is designed to reuse pre-developed communication library of shipboard integration network. By using the wrapping module, monitoring applications are also designed to display several kinds of shipboard data. They are implemented and tested on general PC and embedded PC to verify that they can be applicable to different platforms.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.3
• /
• pp.609-613
• /
• 2010

In this paper, we optimized and simulated the heatsink of 75W LED module for street lighting and evaluated the optical properties with the manufactured heatsink. the structure of LED package make simple as chip and heatslug and thermal flow is analyzed by using the FEM(Finite Element Method) with CFdesign V10. Also, we measured the temperature of heatsink and evaluated the optical properties with infrared thermal image camera and integrated sphere system for luminous flux in $1\;[m^3]$ box. As results, Heatsink optimized in 3 mm pin thickness, 6 mm base thickness and 16 number of pin count by using Heatsink-designer and got the results which is the temperature of $47.37\;[^{\circ}C]$ and thermal resistance of $0.48407\;[W/^{\circ}C]$. In thermal flow simulation, the temperature of heatsink decreased from $51.54\;[^{\circ}C]$ to $51.51\;[^{\circ}C]$ and the temperature of heatsink by the time in real measurement decreased from $47.03\;[^{\circ}C]$ to $46.87\;[^{\circ}C]$. Moreover, we improve 0.68 % in the decreased ratio of the luminous flux.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.2163-2164
• /
• 2006

It is desirable to monitor the vital signals, such as ECG, of a emergency patient during transfer in the hospital as well as in the ambulance. The purpose of this study is to develop a system which provides a real-time and wireless ECG to the medical staff nearby patient during transfer in hospital. In this context, we developed a low-power, low-cost and portable ECG system consisting of 1) ECG measurement and RF transmission module and 2) RF receiving and LCD display module. The developed system is expected to be useful in monitoring ECG of a patient during transfer in the hospital.

• Journal of KIISE:Information Networking
• /
• v.37 no.1
• /
• pp.57-65
• /
• 2010

Recently, the character recognization technique is strongly needed to enable the mobile communication devices with cameras to gather input information from the users. In general, it is not easy to reuse a CBOCR(Camera Based Optical Character Recognizer) module because of its dependency on a specific platform. In this paper, we propose a software architecture for CBOCR module providing the easy adaptability to various mobile communication platforms. The proposed architecture is composed of the platform dependency support layer, the interface layer, the engine support layer, and the engine layer. The engine layer adopts a plug-in data structure to support various hardware endian policies. We show the effectiveness of the proposed method by applying the architecture to a practical product.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.2 no.2
• /
• pp.103-107
• /
• 2016

Solid phase extraction (SPE) purification method is the efficient and well-known tool for automated [$^{11}C$]acetate synthesis. A fully automated homemade module adopting the SPE method and 'pinch' valves was developed very economically with a universal interface board, a relay card and an open source programmable logic controller. The radiochemical yield of the optimized [$^{11}C$]acetate synthesis by this system was $58.8{\pm}2.1%$ (n=10, decay-corrected) from $15.5{\pm}0.19GBq$ of $[^{11}C]CO_2$ as starting activity, and total synthetic time was 15 minutes. HPLC analysis showed its high radiochemical purity as $97.4{\pm}1.1%$ without possible by-products.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.11 s.176
• /
• pp.72-81
• /
• 2005

A new spherical-type 3-degree-of-freedom parallel mechanism consisting of a two degree-of-freedom parallel module and a serial module is proposed. Two alternative designs for the serial sub-chain are suggested and compared. The first design employs RU joint arrangement for the serial sub chain structure. The second design incorporates a gear chain to drive the distal revolute joint of the serial sub-chain from the base platform of the mechanism. This modification significantly improves kinematic characteristics of the mechanism within its workspace. Firstly, the closed-form solutions of both the forward and the reverse position analysis are derived. Secondly, the first-order kinematic model with respect to three inputs which are located at the base is derived. Thirdly, it is confirmed through simulation that the modified mechanism has much more improved isotropic characteristic throughout the workspace of the mechanism. Lastly, the proposed mechanism is implemented to verify the results from this analysis.