• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.322-325
• /
• 2000

In the previous report1), the grinding characteristics of quartz were investigated. In this paper, the grinding mechanisms of brittle materials including ceramics and quartz are modeled and a new parameter SDR(Surface roughness Direction Ratio) is proposed to characterize the grinding mechanisms of such materials. A set of experiments were performed to verify the effectiveness of the suggested parameter. The experimental results indicate that the plastic deformation is the dominant material removal mode at the grinding conditions which show the higher value of SDR. In the case of quartz, the material was removed by brittle fracture in a lower value of SDR and by plastic deformation in a higher value of it. SDR is not affected by wheel mesh size when brittle fracture occured. But in the plastic deformation case, SDR value increases with wheel mesh size.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10c
• /
• pp.160-162
• /
• 2003

분산 시스템 상에서 SDR 소프트웨어 시스템을 구현하려면 재구성성과 유연성이 필요하다. 따라서 이를 충족시켜줄 수 있는 객체지향 컴퓨팅 기술이 필요하게 된다. 이러한 분산 객체 구조를 가능하게 하는 핵심은 CORBA 미들웨어이다. CORBA는 소프트웨어 버스로서 분산성와 이종성을 숨기고 분산 객체들이 유연하게 통신할 수 있게 해주는 핵심 역할을 담당한다. 분산 네트워크 환경 하에서 CORBA의 네이밍 서비스는 네임 서버에 저장한 논리적 이름을 통해서 객체의 위치 정보를 얻는다. 이 방식은 서버의 물리적인 위치 변화에 상관없이 객체의 위치 투명성을 제공한다. 본 논문에서는 SDR 시스템에서 클라이언트가 재구성을 위한 소프트웨어를 다운로드를 받기위해 서버의 구현객체에 논리적인 이름을 이용하여 접근을 가능하게 해주는 신뢰성 있는 CORBA 네이밍 서비스를 설계함으로써 SDR 시스템의 지역적 투명성을 지원하는 모델을 제안한다.

• Electronics and Telecommunications Trends
• /
• v.21 no.3 s.99
• /
• pp.71-78
• /
• 2006

모든 유/무선 네트워크에서 제공하는 서비스를 언제, 어디에서나 단일 단말 시스템으로 접속할 수 있는 유비쿼터스 유무선 통신 시대의 도래가 가시화됨에 따라, 하나의 개방형 플랫폼상에서 소프트웨어적인 변경을 통하여 다양한 무선 접속 규격 및 서비스를 지원할 수 있는 SDR 기술의 중요성이 더욱 부각되고 있다. 본 고에서는 SDRF에서 정의한 SDR 소프트웨어 참조 모델에 기반하여 JTRS에 의해 개발한 SCA 규격 중 코어프레임워크를 중심으로 구조 및 기능을 살펴보고, SDR 기반 이중모드 기지국 구현에서 SCA 규격 적용 사례를 소개한다. 마지막으로 SDR 기술의 실현 가능성과 관련된 기술적 고려 사항을 논의한다.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.14 no.4
• /
• pp.93-99
• /
• 2018

This paper presents an implementation method using NDK (Network Developer's Kit) of GNU (GNU is Not Unix) Radio and Multicore DSP (Digital Signal Processor) to implement LTE (Long Term Evolution) SDR (Software Defined Radio) Platform. In order to satisfy 1.4MHz, 3MHz, 5MHz and 10MHz of the bandwidth supported by LTE, USRP (Universal Software Radio Peripheral) X series which is an RF (Radio Frequency) transceiver of Ettus Research was used. To control this, GNU Radio which is an open source software radio toolkit was used. We also used NDK from TI (Texas Instruments) DSP to transfer data between USRP and DSP. Experimental results show throughput results according to each bandwidth, thus confirming the feasibility of implementing LTE SDR Platform using GNU Radio and NDK of TI DSP.

• Journal of Broadcast Engineering
• /
• v.28 no.1
• /
• pp.149-152
• /
• 2023

In this paper, I present an approach to implement a real-time video transceiver using software-defined radio (SDR). Through this, it is expected that it will be able to lower the access threshold and provide new perspectives and insights to researchers who want to study the recently spotlighted Open Radio Access Network (O-RAN) and implement it through SDR devices and open software.

• Communications for Statistical Applications and Methods
• /
• v.31 no.2
• /
• pp.235-246
• /
• 2024

In high-dimensional data analysis, sufficient dimension reduction (SDR) has been considered as an attractive tool for reducing the dimensionality of predictors while preserving regression information. The principal support vector machine (PSVM) (Li et al., 2011) offers a unified approach for both linear and nonlinear SDR. This article comprehensively explores a variety of SDR methods based on the PSVM, which we call principal machines (PM) for SDR. The PM achieves SDR by solving a sequence of convex optimizations akin to popular supervised learning methods, such as the support vector machine, logistic regression, and quantile regression, to name a few. This makes the PM straightforward to handle and extend in both theoretical and computational aspects, as we will see throughout this article.

• Computers and Concrete
• /
• v.6 no.2
• /
• pp.109-132
• /
• 2009

This paper presents finite element impact analysis for the design of Structurally Dissipating Rock-shed (SDR), an innovative design of reinforced concrete rock-shed. By using an appropriate finite element impact algorithm, the SDR structure is modelled in a simplified but efficient way. The numerical results are firstly verified through comparisons with the results of the experiments recently realized by ESIGEC and TONELLO I.C. It is shown that, using this impact algorithm, it is possible to correctly predict the SDR structural behaviour under different rock-fall impact conditions. Moreover, the numerical results show that the slab centre is the critical impact location for reinforced concrete slab design. The impact analyses have thus been focused on the impacts at the slab centre for the SDR structural optimization. Several series of parametric studies have been carried out with respect to load cases and engineering parameters choices. These numerical results support the robustness of the new SDR concept, and serve to optimize SDR structure and improve its conventional engineering design, especially for ensuring the slab punching shear resistance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.6
• /
• pp.700-705
• /
• 2012

This paper suggests the detecting method in which it uses the candidate symbol obtained through PI-SDR, the little computational complexity is required. By using the candidate symbol matrices obtained through PI-SDR, ZF and MMSE method was applied and the received signal was detected. The linear detecting method using PI-SDR candidate symbol is out of the performance than ML detecting method but the complexity is low. Because of using the symbol come close to the solution of ML, the proposed method's performance is better than the existing ZF and MMSE method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.875-879
• /
• 2000

In the previous report1), the grinding characteristics of quartz were investigated. In this paper, the grinding mechanisms of brittle materials including ceramics and quartz are modeled and a new parameter SDR(Surface roughness Direction Ratio) is proposed to characterize the grinding mechanisms of such materials. A set of experiments were performed to verify the effectiveness of the suggested parameter. The experimental results indicate that the plastic deformation is the dominant material removal mode at the grinding conditions which show the higher value of SDR. In the case of quartz, the material was removed by brittle fracture in a lower value of SDR and by plastic deformation in a higher value of it. SDR is not affected by wheel mesh size when brittle fracture occured. But in the plastic deformation case, SDR value increases with wheel mesh size.

• Journal of Digital Contents Society
• /
• v.10 no.4
• /
• pp.605-614
• /
• 2009

The software-defined radio (SDR) is a radio communication technology that can reconfigure necessary application software on a common hardware platform to deal with several kind of radio communication environment. It is necessary for a system that can control and analyze functionalities of a system in order to verify the SCA-based reconfigurable middleware platform, SCARLET that implements the SDR technology. In this paper, we propose and implement the architecture of the waveform manager that is connected with SCARLET and performs management and control functionalities. We verify the performance of the waveform manager by testing each functionality of the overall system that uses the SCARLET middleware platform.